CYP OR-H44E User manual

OR-H44E
4 by 4 HDMI V1.3 Matrix
Operation Manual
OR-H44E

Revision History
Version No. Date Summary of Change
V1 20090521 Preliminary Release
Precautions
Failure to follow the precautions described below may cause damage to
HDMI 1.3 Matrix Box and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage HDMI 1.3 Matrix.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage HDMI 1.3 Matrix.

Table of Contents
1
1
1
1
2
3
4
4
5
6
6
7
8
1. Introduction.....……………………..…………………................................
2. Applications..........................…..….………………………………….....…
3. Package Contents..............................……………………………….…….
4. System Requirements.............................……………………………..……
5. Features................................…..…………………………………...………..
6. Specifi cations..........................................................................................
7. Installation..............................…………………………………...…………..
7.1. Front Panel......................…………………………………...…………..
7.2. Rear Panel.......................…………………………………...…………..
8. Remote Control.......................…..……………………………...…………..
9. RS-232 Protocal.......................…………..……………………...…………..
9.1 Commands.....................…………………….……………...…………..
10. Connection and Installation.................................................................

1
1. Introduction
While HDMI products are getting more and more popular in the market
people usually have more than one HDMI devices and sources in one place.
HDMI V1.3 Matrix provides the excellent solution for connecting all the
devices and sources together for your convenience use, it also provides you
a variety of choices on where to play your images with remote controller.
Further, HDMI V1.3 Matrix can transfer Deep Color video and bit stream
digital audio with maximum performance and it supports HDMI 1.3, HDCP 1.1
and DVI 1.0.
2. Applications
 Multi-source with multi-display control.
 Home entertainment integration.
 Multi-task project presentation.
 Showroom display.
 Advertising display control.
3. Package Contents
 4 by 4 V1.3 HDMI Matrix.
 Remote Control CR33 (with Battery)
 IR Receiver
 5V DC power supply adaptor.
 Operation Manual.
4. System Requirements
HDMI input device(s) and HDMI output device(s).

5. Features
 HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
 Supports digital video formats in Deep Color Mode at up to 36 bits (12bits/
color) and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and
DTS-HD Master Audio) digital audio and LPCM7.1.
 Supports input source LED indicators on each output select.
 Compatible with all HDMI sources and displays.
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA
and 480i to 1080p.
 Supports RS-232 control.
 Supports IR remote control and IR extender.
 Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).
 HDMI cable distance test with 1080p/8-bit & 12-bit resolution, the input/
output can run up to 15/15 meters.
 High perfomance Matrix of 4 inputs and 4 outputs.
 Re-timed and level compensated HDMI signal progress through the
system.
 Switchable EDID function for choosing EDID to display.
2

3
Frequency bandwidth 2.25Gbps (single link)
Input ports 4 x HDMI female ports,
Output ports 4 x HDMI female ports
EDID Standard, TV/Moving Port 1
HDMI Audio output PCM2, PCM5.1, PCM7.1, Dolby5.1, DTS5.1, DD+
TrueHD, DTS-HD
HDMI Cable in 1080p 8bit (5M), 1080p 12bit (5M)
HDMI Cable out 1080p 8bit (15M), 1080p 12bit (5M)
Color Space RGB_24/36,YCbCr 4:4:4_24/36, YCbCr 4:2:2,xvycc
IR Yes
IR extender x 1
Deep Color 1080p 12bit
HDMI Resolution 480I~1080p 50/60, 1080p 24, VGA~UXGA
DVI Resolution 480I~1080p 50/60, 1080p 24, VGA~UXGA
Power Supply 5VDC/3.2A (US/EU standards, CE/FCC/UL certified)
Dimensions (mm) 280(W) x 145(D) x 49(H)
Weight(g) 1190
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0°C ~ 40°C
Power Consumption 13W
6. Specifi cations

4
7. Installation
7.1 Front Panel
① . Remote control sensor.
② . Input Select/Indicators (A): Press the HDMI out “A”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI A output.
③ . Input Select/Indicators (B): Press the HDMI out “B”button repeatedly to
witch o your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI B output.
④ . Input Select/Indicators (C): Press the HDMI out “C”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI C output.
⑤ . Input Select/Indicators (D): Press the HDMI out “D”button repeatedly to
switch to your desired source and the LED will illuminate to indicate which
input source is being selected and routed to HDMI D output.
⑥ . HDMI inputs: Connect input ports to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box. When the input connection
been detected the SYNC LED will illuminate.
CMLUX-44E 4X4 HDMI v1.3 Matrix
POWER
4
3
2
1
4
3
2
1
4
3
2
1
4
3
2
1
B C D 1 2 3 4
HDMI OUTPUT HDMI INPUT
SYNC SYNC SYNC SYNC
A
① ② ③ ④ ⑤ ⑥
① ② ③ ④ ⑤ ⑥

5
7.2 Rear Panel
① . RS-232 communication port: Connect the COM port of your PC for the
distant control over RS-232 channel. Detail Specifications in section 8.
② . HDMI outputs: Connect each of these output ports to the HDMI display(s).
The device supports repeater function and each output port can supports
16 key sets of KSV and 4 outputs can support a total of 64 key sets of KSV.
③ . IR IN: Place the IR receiver cable in front of the displays and then using
sources remote control to control sources through IR receiver cable.
④ . 8/12 bits switcher – Supports 8 or 12 bit’s deep color function. This selection
is only available when EDID is in STD mode.
Note:
When HDMI output has both 8-bit and 12-bit displays, to ensure all output
will display, switch to 8-bit is imply with the first HDMI output of 8 bit’s
displayer. On the other hand, when all output are with the same bit’s
displayer of 12-bit or 8-bit then switch the function to 12-bit or 8-bit will be
proper. The splitter will not function according to different bits’of display
on HDMI outputs simultaneously.
⑤ . EDID Control Switcher: Default factory setting is TV, leave as it is when
the displays are working properly. Switch to STD to use built-in EDID.
Note:
1. STD means internal EDID, TV means external EDID.
2. When EDID swtich to TV, the unit will detect the first DVI output source's
EDID and record in the unit. If the first detected output source is HDMI it
will pass to next source, until the first DVI been detected. The detection
priority is HDMI v1.3 < HDMI v1.2 < DVI.
3. When EDID is on STD: unit use built-in EDID
Video Support ->1080p 12-bit (max)
Audio Support ->PCM2.
4. EDID switching during display will cause image pause do to EDID
resetting and image re-position.
⑥ . Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
RS-232
HDMI OUTPUT
DC 5V
IR IN 8 Bit STD
D C B A
12 Bit TV
① ② ⑥⑤④③

8. Remote Control
1. Power: Press the button to turn on/off the unit.
2. Input Select for HDMI OUT A: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT A.
3. Input Select for HDMI OUT B: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT B.
4. Input Select for HDMI OUT C: Press 1, 2, 3 or 4 to
select the desired input source for HDMI OUT C.
5. Input Select for HDMI OUT D: Press 1, 2, 3 or 4
to select the desired input source for HDMI OUT D.
* RS-232 transmission format:
Baud Rate: 19200bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None
9. RS-232 Protocal
Pin Defi nition
CMLUX-44E Remote Control Console
PIN Defi nition
→
←
PIN Defi nition
1 NC 1 NC
2 TxD 2 RxD
3 RxD 3 TxD
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC
5
OR-H44E
6

7
9.1 Commands
COMMAND ACTION
POWER 00

Power Off (standby)
POWER 01

Power On
PORT 11

Output A select Input1
PORT 12

Output A select Input2
PORT 13

Output A select Input3
PORT 14

Output A select Input4
PORT 21

Output B select Input1
PORT 22

Output B select Input2
PORT 23

Output B select Input3
PORT 24

Output B select Input4
PORT 31

Output C select Input1
PORT 32

Output C select Input2
PORT 33

Output C select Input3
PORT 34

Output C select Input4
PORT 41

Output D select Input1
PORT 42

Output D select Input2
PORT 43

Output D select Input3
PORT 44

Output D select Input4

10. Connection and Installation
PS3
Blu-ray
DVD
STB
HD TV HD TV
HD TV HD TV
8