CYP PU-8H8HBTPL-4K22 User manual

PU-8H8HBTPL-4K22
8 x 8 HDMI HDBaseT™ LITE Matrix (w. PoC, 4K resolution
support, & HDCP2.2)
OPERATION MANUAL

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.00 20/11/2015 First release

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................7
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
6.3 Side Panel ...................................................10
6.4 Remote Control........................................11
6.5 IR Cable Pin Assignment .......................11
6.6 RS-232 Protocol........................................12
6.7 RS-232 and Telnet Commands............12
6.8 Telnet Control............................................14
6.9 WebGUI Control .......................................16
7. Connection Diagram .......................... 18
8. Specications...................................... 20
8.1 Technical Specications ........................20
8.2 Supported Resolutions..........................21
9. Acronyms............................................. 22

6
1. INTRODUCTION
The 4K2K 8 by 8 HDMI Matrix over CAT5e/6/7 supports the transmission
of video (resolutions up to 4K2K Full HD, HDCP 2.2), multi-channel
digital audio from 8 HDMI sources to 8 HDBaseT LITE outputs via single
CAT5e/6/7 cable up to 60m. The matrix is compatible with high resolution
digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital
Plus and DTS-HD Master Audio as well as 3D content that can be displayed
when connecting a 3D TV and 3D source.
This matrix features control via manual selection buttons, IR, RS-232,
Telnet or Web GUI. CYP provide control drivers for all the major control
systems. This unit also supports UART RS232 pass-through to the
receivers.
The PU-8H8HBTPL-4K22 is designed to be used with PU-515PL-RX & PU-
515PL-WPRX receivers.
2. APPLICATIONS
HDMI Matrix System
Video/TV wall display and control
Security surveillance and control
Commercial advertising, display and control
University lecture hall, display and control
Retail sales and demonstration
3. PACKAGE CONTENTS
1×8 by 8 HDMI 4K UHD over Cat5e/6/7 Matrix
9×IR Blaster
1×Remote Control with battery
2×24V/6.25A Power Adaptor
2×Power Cord
1×Operation Manual

7
4. SYSTEM REQUIREMENTS
HDMI equipped source devices, connect with HDMI cables or DVI
equipped source, connect with DVI to HDMI cables
HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connect with HDMI cables
Industry standard CAT5e/6/7 cables
HDBaseT™ Receivers
5. FEATURES
HDCP 2.2 Compliant
Supported resolutions VGA~WUXGA, 480i~1080p, 4K
UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0),
4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV
4:2:0) dependent upon the output display’s EDID settings
Uncompressed video/audio up to 10.2Gbps
LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission
4K/2K & 4K UHD signals can be transmitted up to 35m via CAT5e/6 and
40m via CAT6a/7
1080p signals can be transmitted up to 60m via CAT5e/6/6a/7
PoC (Power over Cable) feature available on compatible receivers only
Features bi-directional IR from input and output locations
The PU-8H8HBTPL-4K22 can be controlled via RS-232, remote control,
on-panel control and IP Control (Telnet & Web GUI)
2U Size Design
Supports external and internal EDID settings
Note: The PoC function is designed for powering compatible receiver units
only—non-PoC receivers will need their own power supply. Receivers of
another brand may not be compatible.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER LOCK
MENU OUTA 1B2C3D4
IN
E5F6G7H8
2 3 4 5 61
1LCM : Displays the setting information of each input and output
setting.
2POWER: Press this button to power the device ON/OFF. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
3LOCK: Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate orange when locked.
4IR WINDOW: Accepts the remote control signal of this device only.
5MENU: Press this button to access the LCM menu system, from here
EDID settings can be managed and IP system settings are displayed.
61~8/A~H and IN/OUT: Press the Out or In button to select the output
or input mode and then press the required number button to make
the selection accordingly.
For example, if outputs A~D need to be set to input 1 and outputs
E~H need to be set to input 2, then the following sequence of button
presses need to be performed:
Press: Out →A→B→C→D→In→1→Menu,
and then press: Out→E→F→G→H→In→2→Menu.
Note: If the menu button is not pressed the selection will not be changed.

9
6.2 Rear Panel
IR OUT
IR IN
ALL A B C D E F G H
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
IR OUT
IR IN
CAT5e/6 OUT
1
HDMI IN
2
HDMI IN
3
HDMI IN
4
HDMI IN
5
HDMI IN
6
HDMI IN
7
HDMI IN
8
HDMI IN
SERVICE
RS232
MAIN 24V
POE 24V
1
2
3
4
V+
GND
GND GND
V+
CONTROL
2 4
3
510 111 8 9
67
1CONTROL: Connect to an active network for Telnet and Web GUI
control (refer to Sections 6.8 and 6.9).
Warning: Please do not connect this port directly to the PC/Laptop
as the Telnet function will not work.
2RS-232: Connect to a PC or control system with D-Sub 9-pin cable to
control the matrix with RS-232 commands (refer to Sections 6.6 and
6.7.
3ALL IR OUT: Connect an IR Blaster for IR signal transmission to the
source/input location. Place the IR Blaster in direct line-of-sight of the
equipment to be controlled. It will transmit all IR signals received by
any IR extenders connected to the matrix or receivers.
4ALL IR IN: Connect an IR extender for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR extender.
IR signals received will transmitted by all IR blasters connected to the
matrix or receivers.
5SERVICE: Manufacturer use only.
6IR OUT 1~8: Connect to the IR blasters for IR signal transmission. Place
the IR blaster in direct line-of-sight of the equipment to be controlled.
It will transmit the IR signal received from IR extenders connected to
the matrix or receivers according to the selected input.
7IR IN 1~8: Connect to the IR extenders for IR signal reception. Ensure that
remote being used is within the direct line-of-sight of the IR extender.
The IR signal will be tranmitted to the selected receiver's IR OUT.
8CAT5e/6/7 OUT 1~8: Connect from these CAT outputs to the CAT input
port of the receiver units with a single CAT5e/6/7 cable for HDMI Audio/
Video and IR/RS-232 control signal transmission.
Warning: Please do not connect the CAT5e/6/7 output into the
receiver's LAN port.

10
9HDMI IN 1~8: Connect to the HDMI input source devices such as a DVD
player or a Set-top Box with HDMI cable or DVI to HDMI cable.
10 DC 24V MAIN POWER: Plug the 24 V DC power supply into the unit and
connect the adaptor to an AC outlet.
11 PoC 24V: Plug the 24V PoC power supply into the unit and connect the
adaptor to an AC outlet. This unit provides the power supply for Poc (Power
over Cable) capable receiver units.
6.3 Side Panel
1
1Fan Ventilator: These are air ventilation areas, DO NOT block these
areas or cover with any object. Please allow adequate space around
the unit for air to circulate.