CYP EL-21SY User manual

EL-21SY
2-Way HDMI Switcher
OPERATION MANUAL

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v2.00 08/08/14 Updated Format/Diagrams

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions.......8
6.1 Front Panel................................................... 8
6.2 Rear Panel..................................................... 9
7. Connection Diagram .......................... 10
8. Specications...................................... 11

6
1. INTRODUCTION
The EL-21SY switcher accepts two HDMI inputs and allows the user to
switch between two input sources to provide a single HDMI output
for connection to the HDMI display. This switcher has an auto-detect
function which will switch the unit when a source which is powered
‘On’. Alternatively, the input can be selected manually using the input
selection button on the device.
2. APPLICATIONS
Share a single TV/Monitor input between two source devices
Add HDMI inputs to an AV Receiver
Home entertainment
3. PACKAGE CONTENTS
2 to 1 HDMI Switcher
Power Adaptor
Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as a Games Consoles, Blu-ray Players (or a PC/
Laptop with DVI with a DVI to HDMI adaptor cable) and a monitor or TV
with HDMI connection cable.

7
5. FEATURES
HDMI, HDCP 1.1 and DVI 1.0 compliant
HDMI 2-way Switcher
Resolutions Supported:
PC - VGA, SVGA, XGA, SXGA, UXGA & WUXGA (1920x1200)
HDTV - 480i, 576i, 480p, 576p, 720p, 1080i, 1080p and 1080p24fps
High Denition Audio supported - Dolby TrueHD, Dolby Digital Plus
and DTS-HD Master Audio plus LPCM
Auto signal enhancement feature can improve signal quality after long
distance transmission
Auto-switch design
Supports 'Deep Colour' (10, 12, & 16 bit)
LED indicators
Supports xvYCC
Supports 3D signals
Control via front panel buttons
Last memory on power and input selection

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
INPUT POWER
21
12
1INPUT button and LED:
Press this button to switch between source 1 or 2. The LED will
illuminate to indicate the selected source.
2POWER button:
Press this button to switch on the device, press it again to switch the
device into standby mode.

9
6.2 Rear Panel
DC 5V
HDMI
OUT
HDMI 2
IN
HDMI 1
IN
12
1OUTPUT:
Connect to a HDMI equipped TV/monitor or AV receiver for display of
the selected HDMI source signal.
2IN 1/2:
Connect to the HDMI source devices such as a Blu-ray player or a Set-
top Box with HDMI cables or DVI to HDMI cables.
3DC 5V:
Connect the 5V DC power supply to the unit and plug the adaptor
into an AC outlet.

10
7. CONNECTION DIAGRAM
DC 5V
HDMI
OUT
HDMI 2
IN
HDMI 1
IN
HDMI
Input
HDMI
Output
TV/Monitor
Power
Supply
HDMI
Input
Set-top Box Blu-ray Player

11
8. SPECIFICATIONS
Video Bandwidth 225 MHz/6.75 Gbps
Input Ports 2 × HDMI Female Ports (Type A Connector)
Output port 1 × HDMI Female Port (Type A Connector)
Power Supply 5V DC/1.2 A (US/EU standards, CE/FCC/UL
certied)
ESD Protection Human body
model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimension (mm) 101 mm (W) × 92 mm(D) × 25 mm(H)
Weight (g) 196 g
Chassis material Aluminum
Silkscreen Color Black
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F ~ 140 ˚F
Relative Humidity 20~60 % RH (no condensation)
Power Consumption 3.1W

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com
v2.00