Cypress CapSense CY3280-24x94 User manual

CY3280-24x94 UNIVERSAL CAPSENSE®CONTROLLER KIT
QUICK START GUIDE
1. Insert the DVD in the DVD drive.
2. Install the kit contents, PSoC
Designer, and PSoC Programmer.
3. After the installations, you can use
PSoC Designer to customize existing
code examples or to create new ones.
1. Unpack the CY3280-24x94
Universal CapSense Controller (UCC)
Board.
2. Connect the CY3280-SLM board (to
be purchased separately) to the P2
connector.
1. Place the shunt between 5 V and
VCC of jumper J1.
2. Plug in the USB cable to the
CY3280-24x94 UCC board.
1. Touch the CapSense button or slider.
2. The respective LEDs light up.
1 2
3 4

© 2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of
their respective owners. DOC#: 001-68185 Rev *B
www.cypress.com/go/CY3280-24x94
For the latest information about this kit visit
CY3280-24x94 UNIVERSAL CAPSENSE®CONTROLLER KIT
QUICK START GUIDE
CY3280-24x94 UCC Kit Details

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cypress Semiconductor:
CY3280-24X94