Cypress CY3280-BK1 User manual

CY3280-BK1 UNIVERSAL CAPSENSE®CONTROLLER BASIC KIT 1
QUICK START GUIDE
For assistance, go to http://www.cypress.com/go/support, or contact our customer support at [phone] Ext. 8 (in the USA) or
[phone] Ext. 8 (International)
1. Insert the kit CD/DVD into the CD/DVD drive of your PC.
2. Install the kit contents, PSoC Designer, and PSoC Programmer,
by clicking on the Install CY3280-BK1... button.
After installation, the kit contents are available at
<Install_Directory>:\Cypress\CY3280-BK1\<version>
1. Connect the CY3280-SLM board to the CY3280-20x34 UCC
board’s P2 connector.
2. In the CY3280-20x34 board, ensure that the jumper is placed
on header J1 to short pins 2 and 3 (Vcc and 5 V).
3. In the CY3280-SLM board, ensure that the jumper is placed on
header J2 to short pins 2 and 3 (Shield and Ground pins).
1. Connect the MiniProg1 to the CY3280-20x34 UCC board’s
ISSP connector (J3). Connect it to your PC using an USB A to
mini-B cable.
2. Open PSoC Programmer.
3. Click Connect; connect MiniProg1 to your PC.
4. Click the Toggle button to power the board.
1. Touch and move your finger over the linear slider on the
CY3280-SLM module board. The corresponding LEDs on the
CY3280-SLM board light up.
2. Touch a button. The corresponding LED on the CY3280-SLM
module board lights up.
3. You can touch multiple buttons simultaneously. The linear slider
and buttons can be used at the same time.
Repeat steps 2, 3, and 4 to test the CY3280-21x34 CapSense Controller.
1
2
3
4

CY3280-BK1 UNIVERSAL CAPSENSE®CONTROLLER BASIC KIT 1
QUICK START GUIDE
© 2011-2012 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks
referenced herein are the properties of their respective owners. Doc#: 001-43363 Rev. *D
For the latest information about this kit, visit
http://www.cypress.com/go/CY3280-BK1
CY3280-20x34 Board Details
CY3280-21x34 Board Details
DC Supply
Jack
5-V Voltage
Regulator IC
SPI / I2C
Expansion Header
ISSP Header
LEDs D1 and D2
Adjustable
Voltage
Regulator IC
CapSense
Controller
CY8C20000
Jumper for
XRES Selection
CapSense Module
Connector
Footprint for
ICE-Cube
Connector
Jumper to Select
Power Option
9-V Battery
Terminal
CMod
DC Supply
Jack
5-V Voltage
Regulator IC
SPI / I2C
Expansion Header
ISSP Header
LEDs D1 and D2
Adjustable
Voltage
Regulator IC
CapSense
Controller
CY8C21001
Jumper for
XRES Selection
CapSense Module
Connector
Footprint for
ICE-Cube
Connector
Jumper to Select
Power Option
9-V Battery
Terminal
CMod
Rbleed (Rb)

Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Cypress Semiconductor:
CY3280-BK1