D-Link DSL-4320L User manual

1
Modem Setup Guide –NBN FTTP
D-Link DSL-4320L
Please follow the steps below to set up your D-Link DSL-4320L.
1. Ensure your NBN Connection Box is turned on.
2. Plug an Ethernet cable from the UNI-D1 port on your NBN Connection Box into
a LAN port of your choice (Port 4 in this example) on your D-Link modem.
If UNI-D1 doesn’t work, try each UNI-D port.
3. Plug in the power cable and turn your D-Link modem on using the Power button.
4. You can connect devices such as PC desktops, laptops or gaming consoles by plugging
Ethernet cables from the device to any of the free LAN ports, or you can connect
devices via WiFi.
5. Go to http://dlinkrouter.local or http://192.168.1.1 in your browser.

2
Modem Setup Guide –NBN FTTP
6. Log in with your D-Link modem username and password if you are prompted to log in.
By default, these are:
Username: admin
Password: admin
7. Select Internet and Advanced Settings.
8. Select Residential Gateway from the WAN Access Type drop-down.
9. Select the nominated port for Ether WAN Port.
10. Select Username/Password Connection (PPPoE) as Internet Connection.
11. Enter your TPG username and password.
12. Click Save.
Once you receive notification that your TPG NBN service is active, your D-Link DSL-4320L
should now be online. If you are still having issues, please call us on 1300 997 271 for
further assistance.