D-Link DMP-100 User manual

Download the Driver
If you haven’t already downloaded the Windows 2000 Driver for the
DMP-100, do so by visiting http://support.dlink.com.
Extract the Driver
Once downloaded, extract the driver to a folder using Winzip or other ZIP
extractor. Save the files to a folder that is easy to get to (i.e.: C:\Temp).
Add the Driver to Windows 2000
Open the Control Panel by clicking on Start, Settings, Control Panel.
Double-click on the
Add/Remove Hardware icon.
When the following screen is
displayed, click the Next button.

Add the Driver to Windows 2000 continued…
Select “Add/Troubleshoot a
device” and click the Next
button.
Select “Add a new device” and
click the Next button.
Select “No, I want to select the
hardware from a list” and click
the Next button.

Add the Driver to Windows 2000 continued…
Select “Other devices” and click
the Next button.
Click the Have Disk… button.
Click the Browse…button to
select the location of the driver,
or manually type the location of
the driver in the “Copy
manufacturer’s files from:” box.
The location should match the
location where you extracted the
driver files in step 2, with the addition of the “Driver” folder.

Add the Driver to Windows 2000 continued…
Select “MP3 Player Driver” and
click the Next button.
Click the OK button.
If there are no conflicts in the
“Conflicting device list:” then
you can click the OKbutton. If
devices are listed in the
“Conflicting devices list:” then
you will need to change the
settings so that there are no
conflicts by either selecting a
different “Basic Configuration”
in the “Setting based on:”
drop-down box or by clicking
the Change Setting… button.
When there are no conflicting
devices, click the OKbutton.

Add the Driver to Windows 2000 continued…
Click the Yes button to continue.
Click the Next button.
Click the Finishbutton.

Add the Driver to Windows 2000 continued…
Click the Yes button to
restart your computer.
Install the Manager Program
After the Driver has been
installed, the Manager program
must be installed.
Click the Start button on the
Windows Taskbar, and then
click the Runbutton.
In the Run dialog box, type
the location of the
SETUP.EXE file that you
extracted from the ZIP file.
You may also browse your
hard disk and select the
SETUP.EXE file from the
correct directory.

Install the Manager Program continued…
At the “Welcome” screen, click
the Next button to continue.
Click the Next button.
Click the Finishbutton.

Running the Manager Program
Run the Manager Program by clicking on the Start button. Then click
Programs, then the icon labeled D-Link. There is also a link on the Desktop.
Please refer to the User’s Manual for additional information on how to use the
Manager Program.
D-Link Technical Support information is listed below if any problems arise
during installation.
D-Link Technical Support over Telephone:
[phone]
6 a.m. to 6 p.m. Monday thru Friday
D-Link Technical Support over the Internet:
www.dlink.com