D-Link DCS-936L Manual

Technical Support Setup Procedure
How to Setup always record to SD Card DCS-936L?
Step 1: Connect the power of the camera and power on.
Step 2: Open Internet Explorer and enter http://sg.mydlink.com
Step 3: Enter mydlink registered username and password. Click on Sign In.
Step 4: Select DCS-936L. Click on Settings
Step 5: Scroll your mouse down and click on Advanced Settings.
Step 6: Click on Open the Advanced Settings window.

Technical Support Setup Procedure
Step 7: Copy down the IP address of the DCS-936L show in the URL bar.
Step 8: Open Internet Explorer and enter the IP address of the camera that you had copy
down on the URL bar.
Step 9: Enter the camera user name and password that had set during setting up of the
camera. Click on OK.
Step 10: a) Click on Setup > SD Recording.
b) Put a Tick in the box beside SD Recording.
c) Select Always
d) Select Video for recording type.
e) Select Profile 1 as Source
f) Select MP4, mp4 as File Format
g) Select 6minutes per file for Recording Length
h) Type in 200 in the box beside Keep Free Space.
i) Tick Cyclic
j) Click on Save Settings
--- END ---