D-Link DWL-AG700AP - AirPlus AG - Wireless Access... User manual

2
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Table of Contents
Table of Contents
Table of Contents ............................................................................2
Package Contents ............................................................................3
Introduction ....................................................................................4
Connections ....................................................................................5
LEDs................................................................................................6
Features and Benefits ......................................................................7
Wireless Basics ................................................................................8
Installation Considerations ..............................................................9
Getting Started ............................................................................. 10
Using the Configuration Menu .................................................... 11
Networking Basics........................................................................ 30
Troubleshooting........................................................................... 46
Technical Specifications ............................................................... 52
Contacting Technical Support...................................................... 55
Warranty ..................................................................................... 56
Registration .................................................................................. 59

3
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Package Contents
Note: Using a power supply with a different voltage than the one included with the
DWL-AG700AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
Package Contents
D-Link Air Plus AG DWL-AG700AP
Wireless AG Access Point
Power Supply - 5V DC 2.0A
Manual on CD
Quick Installation Guide
Ethernet Cable
®
Minimum System Requirements
Computers with Windows XP/2000, Macintosh, or Linux-based operating
systems with an installed Ethernet Adapter
Internet Explorer version 6.0 or Netscape Navigator version 7.0 and above

4
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Introduction
Introduction
With a maximum wireless signal rate of up to 54Mbps*, the DWL-AG700AP is a wireless
access point that enables dualband networks, conveniently delivering connectivity in
both the 802.11a and 802.11g bands.
With the DWL-AG700AP, bandwidth-intensive applications like graphics or multimedia
will benefit significantly because large files are able to move across the network quickly.
The D-Link
Air Plus AG DWL-AG700AP provides maximum security with the option of
WPA or WEP. Additional security is provided with the optional use of filters for managing
network access.
With dualband capabilities, maximum wireless signal rates up to 54Mpbs, enhanced
security features including WPA and optional filter management, the DWL-AG700AP is
a versatile choice for your diverse network needs.
*Maximum wireless signal rate based on IEEE Standard 802.11a/g specifications. Actual data throughput will vary. Network
conditions and environmental factors lower actual data throughput rate.

5
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Connections
The Auto/MDIX LAN port automatically
senses the cable type when connecting
to Ethernet-enabled computers.
Pressing the Reset Button
restores the router to its original
factory default settings.
Receptor for the Power Adapter.

6
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
LEDs
Power LED
A solid light indicates a proper
connection to the power supply.
WLAN LED
A solid light indicates that the wireless segment
(802.11a and/or 802.11b/g) is ready. This LED blinks
during data transmission.
LOCAL NETWORK
LED
A solid light indicates
a connection (10M
and/or 100M) to an
Ethernet port.The
LEDs blink during
data transmission.

7
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Features and Benefits
Features and Benefits
*Maximum wireless signal rate based on IEEE Standard 802.11a/g specifications. Actual data throughput will vary.
Better security with WPA-PSK - The DWL-AG700AP can securely connect to
wireless clients on the network using WPA-PSK providing a much higher level of
security for your data and communications than has previously been available.

Compatible with IEEE802.11a and IEEE802.11g standards to provide a wireless
data rate of up to 54Mbps.*

Backward compatible with the 802.11b standard to provide a wireless data rate
of up to 11Mbps with 802.11b devices - that means you can migrate your system to
the 802.11g standard on your own schedule without sacrificing connectivity.

Supports WEP encryption.

Optional filter management feature - Access to your network can be controlled by
the MAC addresses of the devices, using the optional filter tool included in your
convenient Web-based management utility.


8
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and
compatible high-speed wireless connectivity within your home, business or public access
wireless networks. D-Link wireless products will allow you access to the data you want,
when and where you want it. You will be able to enjoy the freedom that wireless
networking brings.
A Wireless Local Area Network (WLAN) is a computer network that transmits and
receives data with radio signals instead of wires. WLANs are used increasingly in both
home and office environments, and public areas such as airports, coffee shops and
universities. Innovative ways to utilize WLAN technology are helping people to work
and communicate more efficiently. Increased mobility and the absence of cabling and
other fixed infrastructure have proven to be beneficial for many users.
People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location
within the operating range of the WLAN. Management decisions based on real-time
information can significantly improve worker efficiency.
Low Implementation Costs - WLANs are easy to set up, manage, change and relocate.
Networks that frequently change can benefit from WLANs ease of implementation.
WLANs can operate in locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and easy
and can eliminate the need to pull cable through walls and ceilings.Wireless technology
allows the network to go where wires cannot go - even outside the home or office.
Inexpensive Solution - Wireless network devices are as competitively priced as
conventional Ethernet network devices.The DWL-AG700AP saves money by providing
multi-functionality, configurable in one of four different modes.
Scalability - WLANs can be configured in a variety of ways to meet the needs of specific
applications and installations. Configurations are easily changed and range from Peer-
to-Peer networks suitable for a small number of users to larger Infrastructure networks
to accommodate hundreds or thousands of users, depending on the number of wireless
devices deployed.
Wireless users can use the same applications they use on a wired network. Wireless
adapter cards used on laptop and desktop systems support the same protocols as
Ethernet adapter cards.

9
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
The D-Link DWL-AG700AP lets you access your network, using a wireless connection,
from virtually anywhere within its operating range. Keep in mind, however, that the
number, thickness and location of walls, ceilings, or other objects that the wireless
signals must pass through, may limit the range. Typical ranges vary depending on the
types of materials and background RF (radio frequency) noise in your home or business.
The key to maximizing wireless range is to follow these basic guidelines:
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or
appliances that generate RF noise.
4
Keep the number of walls and ceilings between the DWL-AG700AP and other
network devices to a minimum - each wall or ceiling can reduce your DWL-AG700AP’s
range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or
ceilings is minimized.
1
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a
2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the
signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
2
Building materials can impede the wireless signal - a solid metal door or aluminum
studs may have a negative effect on range. Try to position wireless devices and
computers with wireless adapters so that the signal passes through drywall or open
doorways and not other materials.
3
Installation Considerations

10
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Getting Started
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to a Router.
(
See the printed Quick Installation Guide included with your router. )
Install a wireless AG adapter into computer 1.
( See the printed Quick Installation Guide included with the wireless AG
adapter.
)
2
3
4
5
6
You will need broadband Internet access.
11
11
1
Connect the Router to the DWL-AG700AP.
(
See the printed Quick Installation Guide included with the DWL-AG700AP. )
Install a wireless AG adapter into computer 2.
(
See the printed Quick Installation Guide included with the wireless AG
adapter. )

11
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Using the Configuration Menu
To configure the DWL-AG700AP, use a computer which is connected to the
DWL-AG700AP with an Ethernet cable.
First, disable the
Access the Internet using a proxy server function. To disable
this function, go to
Control Panel > Internet Options > Connections > LAN
Settings and uncheck the enable box.
Start your Web browser program (Internet Explorer, Netscape Navigator) .
Type the IP address of the DWL-AG700AP in the address field
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-AG700AP and your computer are in the same subnet.
http://192.168.0.50
After the connection is established, you will see the user identification window as
shown.
Note: If you have changed the default IP address assigned to the DWL-AG700AP, make sure to
enter the correct IP address.



Type admin in the User Name field
Leave the Password field blank
Click OK
Note: If you have changed the password, make sure to enter the correct password.

12
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
The Home>Wizard screen will appear. Please refer to the
Quick Installation Guide for
more information regarding the Setup Wizard.
Home > Wizard
These buttons appear on most of the configuration screens in this section. Please click
on the appropriate button at the bottom of each screen after you have made a configuration
change.

13
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Home > Wireless
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is default.The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
52 is the default channel for the 802.11a wireless band. 6is the
default channel for the 802.11g wireless band. All devices on the
network must share the same channel. (Note:The wireless adapters
will automatically scan and match the wireless setting.)
The radio frequency will vary depending on the wireless channel
that is chosen. The frequency in channel 52 is 5.26GHz.
SSID:
SSID Broadcast:
Channel:
Radio Frequency:
Wireless Band: IEEE802.11a is selected here. The other option is IEEE802.11g.
Choose the wireless band from the pulldown menu.

14
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
When you select WPA-PSK, choose a Cipher (EAP) type: AES, Auto
or TKIP.
Select Enabled or Disabled.
Select HEX or ASCII. Hexadecimal digits consist of the numbers
0-9 and the letters A-F. ASCII (American Standard Code for
Information Interchange) is a code for representing English letters
as numbers from 0-127.
Select 64-, 128-, 152-bit key size.
Select one key from the four keys that have been input.
Input up to four encryption keys here.
Click Apply to save the settings.
Cipher Type:
WEP Type:
Key Type:
Key Size:
Valid Key:
Keys 1-4:
Apply:
Authentication: Open System - Communicates the key across the network.
Shared Key - limits communication to only those devices that share
the same WEP settings.
WPA-PSK - increases the security level without a RADIUS server.
When you select WPA-PSK, you will need to enter a Passphrase
and select a Cipher (EAP) type.
Home > Wireless - continued

15
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Home > LAN
Static (Manual) is chosen here. Choose this option if you do not have
a DHCP server in your network, or if you wish to assign a static IP
address to the DWL-AG700AP.
The default IP address is 192.168.0.50. Assign a static IP address
that is within the IP address range of your network.
Enter the subnet mask. All devices in the network must share the
same subnet mask..
Enter the IP address of the gateway in your network. If there isn’t a
gateway in your network, please enter an IP address within the range
of your network.
Using the Configuration Menu
Get IP From:
IP Address:
Subnet Mask:
Default Gateway:
LAN is short for Local Area Network. This is considered your internal network. These
are the IP settings of the LAN interface for the DWL-AG700AP. These settings may be
referred to as private settings.You may change the LAN IP address if needed.The LAN
IP address is private to your internal network and cannot be seen on the Internet.

16
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Home > DHCP Server > Current IP Mapping
Using the Configuration Menu
These are IP address pools to which the DHCP server function has
assigned dynamic IP addresses.
Assigned
IP address-
Lease Time-
This screen displays information about the current DHCP dynamic and static IP address
pools. This information is available when you enable the DHCP function of the
DWL-AG700AP and assign dynamic and static IP address pools.
The MAC address of a device on the network that is within the DHCP
dynamic IP address pool.
The current corresponding DHCP-assigned dynamic IP address of
the device.
The length of time that the dynamic IP address will be valid.
Current DHCP
Dynamic Pools-
Binding MAC
address-

17
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Home > DHCP Server > Dynamic Pool Settings
Function Enable
or Disable:
IP Assigned From:
The Range of
Pool (1-256):
SubMask:
Gateway:
Wins:
Lease Time
(60-31536000 sec):
DNS:
Domain Name:
Status:
Enable or Disable the DHCP function here.
Enter the starting IP address in the range.
Enter the number (quantity) of IP addresses in the range.
Enter the subnet mask here.
Enter the IP address of the router on the network.
Windows Internet Naming Service is a system that determines
the IP address of a network computer that has a dynamically
assigned IP address.
Enter the IP address of the DNS server. The DNS server translates
domain names such as www.dlink.com into IP addresses.
Enter the Domain Name of the DWL-AG700AP.
The Lease Time is the period of time before the DHCP server will
assign new IP addresses.
Turn the Dynamic Pool Settings ON or OFF here.

18
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Advanced > Performance
Wireless Band:
Beacon Interval:
RTS Length
(256-2346):
Fragment Length:
DTIM (1-255):
Transmit Power:
Select IEEE802.11a or IEEE802.11g. IEEE802.11a is selected here.
Beacons are packets sent by an access point to synchronize a
network. Specify a beacon interval value. The default (100) is
recommended.
This value should remain at its default setting of 2346. If you
encounter inconsistent data flow, only minor modifications to the
value range between 256 and 2346 are recommended.
The fragmentation threshold, which is specified in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte setting will be fragmented before transmission. 2346 is the
default setting.
(Delivery Traffic Indication Message) - Select a setting between 1and
255. 1is the default setting. DTIM is a countdown informing clients of
the next window for listening to broadcast and multicast messages.
Choose full, half (-3dB), quarter (-6dB), eighth (-9dB), minimum
power.
Auto

19
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Data Rate:
Radio Wave: Select ON or OFF.
The Data Rates are Auto, 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 9Mbps,
11Mbps, 12Mbps, 18Mbps, 24Mbps, 36Mbps, 48Mbps, 54Mbps.

20
DWL-AG700AP User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Wireless Band:
Access Control:
MAC Address:
MAC Address List:
Select IEEE802.11a or IEEE802.11g. IEEE802.11a is chosen here.
Enter the MAC addresses that you wish to include in your filters list,
and click Save.
When you enter a MAC address, it appears in this list. Highlight a
MAC address and click Delete to remove it from the list.
Advanced > Filters > Wireless Access Settings
Select Disabled to disable the filters function.
Select Accept to accept only those devices with MAC addresses in
the Access Control List.
Select Reject to reject the devices with MAC addresses in the Access
Control List.