Dadant B52601 User manual

ASSEMBLY INSTRUCTIONS FOR 8-FRAME COMPLETE HIVE B52601
Note: Separate and idenfy parts before assembling. Nail sizes may vary due to availability.
Telescoping Cover
1 – Masonite
2 – Side Rails
2 – End Rails
1 – Metal Cover Pan


Inner Cover
2 – End Cleats
2 – Side Cleats
1 – Masonite (with hole)

1. Assemble Cleats around Masonite Panel
 
(See gure 2 for assembling Inner Cover)
Super/Hive Body
Use One 4D nail and six
7D nails in each corner.

End Cleat
Masonite
Side
Rail
Side
Rail
Figure 2
Figure 3
 

2. Set Masonite Panel in Frame (smooth side

side.
 

(See gure 1 for assembling Telescoping Cover)
Figure 1
End Rail
Side
Rail
Side
Rail
Metal Cover Pan Masonite
End
Side
Side
End

Frame and Foundaon Assembly
2 – End Bar










(See gure 5 for assembling Boom Board.)
Boom Board


2 – Side Rails




End Bar
Top Bar
Top Bar
End Bar
Top Cleat
Figure 4
Figure 5
Boom Cleat
Side Rail
Side Rail
Boom Boards
Foundaon sold
separately

corner.




(See gure 4 for assembling frames.)