Specifications EDUS281008
4FTQ-PA + RZQ-P
3. Specifications
3.1 FTQ
Air handling unit
Notes:
1. Nominal cooling capacities are based on the following conditions:
Return air temperature : 80°FDB (27°CDB), 67°FWB (19.4°CWB)
Outdoor temperature : 95°FDB (35°CDB)
Equivalent ref. piping : 25ft (7.5 m) (Horizontal)
2. Nominal heating capacities are based on the following conditions:
Return air temperature : 70°FDB (21°CDB)
Outdoor temperature : 47°FDB (8.3°CDB), 43°FWB(6°CWB)
Equivalent ref. piping : 25ft (7.5 m) (Horizontal)
(*1 and 2 are teh performance for vertical installation. For horizontal installation, capacity could decrease by about 10%)
3. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side.
5. The second drain pan (sub drain pan) must be needed as field supply parts. A secondary field-supplied drain pan may be required.
Model Indoor unit FTQ18PAVJU FTQ24PAVJU
Outdoor unit RZQ18PVJU9 RZQ24PVJU9
Power Supply 1 phase, 208V/230V, 60Hz
3 Cooling capacity Btu/h 18,000 24,000
3 Heating capacity Btu/h 20,000 27,000
Indoor unit FTQ18PAVJU FTQ24PAVJU
Dimensions H×W×D in. (mm) 53–1/4 × 22 × 24 (1353 x 559 x 610)
Coil
Type Cross fin coil
Row×Stages×FPI 8 × 22 × 15
Face area ft2 (m2) 6.02 (1.8)
Fan
Model ECM (3/4 HP)
Type Sirocco fan
Motor output HP 3/4
Airflow rate (H/L) CFM 600/420 800/560
External static pressure
in.H
2
O
Up to 0.5 in. W.C.
Drive Direct drive
Temperature control Microprocessor thermostat for cooling and heating
Air filter —4
Weight Lbs (kg) 169 (77)
Piping
Connections
Liquid in. (mm) φ3/8 (9.5) (Brazed)
Gas in. (mm) φ5/8(15.8) (Brazed)
Drain in. (mm) φ3/4 (19.1) 5
Outdoor unit RZQ18PVJU RZQ24PVJU
color Ivory
Dimensions H×W×D in. (mm) 30–5/16 × 35–7/16 × 12–5/8 (762 x 900 x 321)
Coil
Type Cross fin coil
Row×Stages×FPI 2 × 34 × 18
Face area ft2 (m)27.1 (2.2)
Comp.
Model 2YC63HXD#ED
Type Hermetically sealed swing type
Motor output kW 1.7
Fan
Model P47N11F
Type Propeller fan
Motor output W 70
Airflow rate CFM 1,835
Weight Lbs (kg) 150
Piping
Connections
Liquid in. (mm) φ3/8 (9.5) (Flare connection)
Gas in. (mm) φ5/8 (15.8)(Flare connection)
Drain in. (mm) φ1 (25.4) (Hole)
Safety devices Indoor fan driver overload protector. Fuse. High pressure switch. Outdoor fan driver overload protector. Inverter
overload protector. Fusible plugs.
Capacity step % 35-100 30-100
Refrigerant control Electronic expansion valve
Ref. piping
Standard length ft (m) 25 (7.5)
Max. length ft (m) 98 (30)
Max. height difference ft (m) 98 (30)
Refrigerant Model R-410A
Charge Lbs (kg) 5.1(2.3)
Ref. oil Model Refer to the name plate of compressor.
Charge Lbs (kg) 0.75 (0.34)
Drawing No. C: 4D068242