Dakota Digital Retrotech RLC-51C User manual

Manual # 650747
RLC-51C
Dakota Digital RTX Clock Installation
For 1951-‘52 Chevrolet Car
Your new RLC-51C kit includes:
Installation
RLC Clock
Installation Manual
1. Disconnect and remove the original clock.
2 x 3/8” screws
Short L-Bracket
Long L-Bracket
Harness

Manual # 650747
3. Insert the RLC gauge into the clock bezel, making sure it is centered. Then, partially secure the gauge
on the top side with the supplied long L-bracket and one of the supplied 3/8” screws.
2. Underneath the dash; remove the three (3) nuts that hold the back plate and clock bezel to the dash.
Retain these parts for reassembly.
4. Insert the clock bezel into the dash and retain the bezel with
the factory back plate and nuts that were saved from removal.
Also secure the bottom part of the gauge to the dash using the
provided short L-bracket and the remaining provided screw.
Short L-Bracket
Long L-Bracket

Manual # 650747
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
5. Connect the provided RLC harness to the back of
the clock.
6. Refer to the enclosed clock operating manual
for remaining connections and clock setup.