Dakota Digital VHX VHX-73F-PU User manual

Manual # 650461A
VHX-73F-PU
Dakota Digital VHX Instrument Installation
For 1973-’79 Ford Pickups
Your new VHX-73F-PU kit includes:
Installation
Installation Manuals
Control Box
36” CAT5 Cable
Universal Sender Pack
VHX Display
1a. First, you will need to remove the stock gauge cluster. To do so, remove the LIGHTS and WIPER
knobs as well as the four (4) Phillips screws on the top edge of the bezel as indicated in the photo.
Also, disconnect the wiring and speedometer cable on the back side of the gauge cluster. Retain
hardware for reassembly.
Ford Speed Adapter
Switch Assembly

Manual # 650461A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
1b. Finally, remove the four (4)
mounting screws holding the
cluster to the dash. Retain these
screws for reassembly.
2. Attach the provided 36” CAT5 cable to the back
of the VHX system and carefully route the other
end to the control box mounting location.
3. Refer to the main manual for wiring instructions and install the VHX cluster in reverse order
using all stock hardware to complete the VHX installation.