Dakota Digital HDX-54C-PU User manual

Manual # 650622A
HDX-54C-PU
Dakota Digital HDX Instrument Installation
For ‘54 and ‘55 “First Series” Chevy pickup systems
Your new HDX-54C-PU kit includes:
Installation
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
HDX Display
1. Remove the stock gauges from the dash. Each gauge is held in place by three nuts on studs on
the back of the dash. Save the nuts as they will be re-used to secure the new HDX kit.
Buzzer
Interconnect Harness

Manual # 650622A
2. Secure the new HDX Instruments to the dash re-using the original nuts.
3. Connect the provided interconnect harness to the back of the HDX system.

Manual # 650622A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
5. Refer to the main manual for wiring instructions to complete the HDX installation.
4. Connect the provided main harness and the buzzer (optional for audio feedback) to the back of
the HDX system.
Buzzer Connecter
Main Harness