Dakota Digital Retrotech RTX-33F User manual

Manual # 650730
RTX-33F
Dakota Digital RTX Instrument Installation
For 1933-34 Ford Car
Your new RTX-33F kit includes:
Installation
Control Box
(2x) U-Brackets
(4x) Thumb Nuts
Main Harness
Universal Sender Pack
Installation Manuals
and Cutout Template
1. Use the provided template to mark out the opening needed to fit the RTX display. Ensure there is
adequate clearance behind the desired mounting location. The display unit needs approximately two
inches of depth behind the dash.
RTX Display
Ford Adapter
Switch Assembly

Manual # 650730
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
2. With the appropriate opening cut, place
the RTX display into the dash and attach
the two (2) U-brackets to the back of the
display using the provided thumb nuts.
3. Connect the provided main harness and the
buzzer (optional for audio feedback) to the
back of the RTX system. Carefully route the
other end of the main harness to the control
box mounting location and refer to the main
manual for wiring instructions.
Buzzer Connector
Main Harness