Dakota Digital VHX-81D-PU User manual

Manual #650808
VHX-81D-PU
Dakota Digital VHX Instrument Installation
For 1981-’93 Dodge Pickup
Your new VHX-87D-PU kit includes:
VHX Display
Control Box
36” CAT5e Cable
Universal Sender Pack
Installation Manuals
Switch Assembly

Manual #650808
Installation
2. Remove and retain the (5) screws in the locations below to remove the stock gauges. Keep
these screws separate from the screws retained in the previous step to avoid any confusion.
1. Remove the retain the (6) screws in the locations below to remove the OEM bezel. The
mounting tabs on the bottom (blue arrows) will release once the screws are taken out and bezel is
lifted.

Manual #650808
4. Mount the VHX system to the dash using the (5) screws retained from step #2.
3. Attach the provided 36” Cat5e cable to the back of the VHX display. Carefully route the other
end to the control box mounting location.
36” Cat5e Cable

Manual #650808
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Refer to the main VHX manual for control box wiring and setup instructions.
5. Lower the bezel into the dash and secure the mounting tabs. Attach the OEM bezel to the dash
using the retained (6) screws from step #1.