Dakota Digital Retrotech RTX-70C-CAM User manual

Manual # 650671
RTX-70C-CAM
Dakota Digital RTX Instrument Installation
For 1970-‘81 Chevy Camaro
Your new RTX-70C-CAM kit includes:
Installation
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
RTX Display
Buzzer
1. First remove the four screws holding the bezel to the dash. These four screws will be re-used for
re-assembly.
Switch Assembly

Manual # 650671
3. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
RTX system.
Buzzer Connector
2. Remove the four screws holding the gauges into the dash. These screws will be re-used for the
RTX gauge installation.

Manual # 650671
4. Secure the RTX system to the dash with the original four screws.
5a. Align the bezel over the gauges. Watch carefully so you don’t scratch or damage the lens.
5b. The RTX system
should align tightly
and the lens should
sit flush with the
bezel.

Manual # 650671
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
6. Secure the bezel to the dash with the four original screws. Refer to the main manual for wiring
instructions to complete the RTX installation.