Dakota Digital VHX-53F-PU User manual

Manual # 650394A
VHX-53F-PU
Dakota Digital VHX Instrument Installation
For 53-55 Ford Pickup
Your new VHX-53F-PU kit includes:
Installation
Control Box
CAT5 Cable
Universal Sender
Pack
Installation Manuals
VHX Display
1. Remove the stock gauges from the dash by removing the four screws securing the gauges to the
dash.
Ford speed
sender adaptor
Switch Assembly
Mounting screws

Manual # 650394A
3. Secure the VHX system to the system with the four 10-18x.5”
screws provided. The two counter sunk screw are for the upper two
locations and the two pan heads are for the lower two locations.
Take care when tightening the mounting screws to avoid stripping
the threads.
2. The VHX system should align tightly with
the dash.

Manual # 650394A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
4. Connect the CAT5 cable to the
system. As the assembled cluster
is installed into the dash, take
care when routing this cable to
the control box.
5. Refer to the main manual for wiring instructions to complete the VHX
installation.