Dakota Digital HDX-2200 User manual

Manual # 650660
HDX-2200
Dakota Digital Universal HDX Instrument Installation
Your new HDX-2200 kit includes:
Installation
Control Box
(4) Flanged Nuts
Universal Sender Pack
Installation Manuals
and Cutout Template
HDX Display
1. Use the provided template to mark out the opening and mounting holes needed to fit the HDX display
in the desired location. Ensure there is adequate clearance with overall size including behind the
desired mounting location; the display requires approximately 2” of depth.
Buzzer
Main Harness
(4) 10-32 X 1.5”
Screws

Manual # 650660
2. With the appropriate opening cut and mounting holes drilled, carefully place the HDX display from
the front side and use the provided screws and nuts to secure the HDX display to the dash.

Manual # 650660
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
3. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
HDX system and refer to the main manual for wiring instructions to complete the HDX installation.
Buzzer Connector