Dakota Digital VHX-37C User manual

Manual # 650436A
VHX-37C
Dakota Digital VHX Instrument Installation
For 1937-38 Chevrolet Car
Your new VHX-37C kit includes:
Installation
Control Box
CAT5 Cable
Universal Sender Pack
Installation Manuals
VHX Display
1. Remove the stock cluster from the dash and be sure to retain all hardware for reassembly.
Switch Assembly

Manual # 650436A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
2. Connect the CAT5 cable to the system as the VHX cluster is installed into the dash.
Watch carefully so you don’t scratch or damage the lens or bezel, and take care when
routing the CAT5 cable to the control box location.
3. Re-install the cluster into the vehicle using the stock hardware on the (4)
four mounting tabs and refer to the main manual for wiring instructions to
complete the VHX installation.