Dakota Digital HDX-61C-IMP User manual

Manual # 650601A
HDX-61C-IMP
Dakota Digital HDX Instrument Installation
For 1961-‘62 Chevy Impala
Your new HDX-61C-IMP kit includes:
Installation
Control Box
Main Harness
Universal Sender
Pack
Installation Manuals
HDX Display
Buzzer
(6) Thumb Nuts
(2) ¼-20 Nuts
1. Remove the stock gauges from the dash. The thin bezel around the main gauge will remain in place.
(3) U-Brackets

Manual # 650601A
3. Place the main gauge over the factory studs and use the provided two ¼-20 nuts to secure the
gauge to the dash bezel.
2. Insert the three auxiliary gauges from the front of the dash; from left to right: Temp, Tach, and Fuel.
Use the two longer brackets for the Temp and Fuel; the Tach uses the shorter bracket. Use the
supplied thumb nuts to secure the gauge to the dash while making sure each gauge is properly
orientated.
4. Make the three (3) interconnect harness connections to the auxiliary gauges with their respective
length ends.
Temp
Tach
Fuel

Manual # 650601A
WARNING: This product can expose you to chemicals including lead, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
5. Connect the provided harness and the buzzer (optional for audio feedback) to the back of the
HDX system.
Buzzer Connector
6. Refer to the main manual for wiring instructions to complete the HDX installation.