dallmeier DDF51 0HDV-DN Series Guide

006830 / 1.0.2 / 2018-12-19
IM
DDF51(X)0HDV-DN
Commissioning
English

Copyright © 2018 Dallmeier electronic GmbH & Co.KG
The reproducon, distribuon and ulizaon of this document as well as the communicaon of its contents to
others without express authorizaon is prohibited. Oenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of a patent, ulity model or design.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due to minor
defects of the product or documentaon, e.g. print or spelling errors, and for those not caused by intenon or
gross negligence of the manufacturer.
Figures in this document may dier from the actual product.
We reserve the right to make technical modicaons.
All trademarks idened by ® are registered trademarks of Dallmeier electronic.
All trademarks idened by *) are trademarks or registered trademarks of the following owners:
Google and Google Chrome of Google Inc. headquartered in Mountain View, California, USA;
JavaScript of Oracle Corporaon (and/or its aliates) headquartered in Redwood Shores, California, USA;
microSDXC of SD-3C, LLC headquartered in North Hollywood, California, USA;
Microso, Internet Explorer, Microso Edge and Windows of Microso Corporaon headquartered in
Redmond, Washington, USA;
Mozilla and Firefox of Mozilla Foundaon headquartered in Mountain View, California, USA;
Torx of Acument Intellectual Properes, LLC headquartered in Rockford, Illinois, USA;
Phillips of Phillips Screw Company headquartered in Burlington, Massachuses, USA.
Third-party trademarks are named for informaon purposes only.
Dallmeier electronic respects the intellectual property of third pares and always aempts to ensure the
complete idencaon of third-party trademarks and indicaon of the respecve holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the
respecve trademark is unprotected.
This product includes soware developed by the OpenSSL Project for use in the OpenSSL Toolkit
(hp://www.openssl.org) and cryptographic soware wrien by Eric Young (eay@cryptso.com).

© 2018 Dallmeier | www.dallmeier.com 3
Commissioning DDF51(X)0HDV-DN-IM
Contents
1 Validity 4
2 Documents 4
This Document 5
Other Applicable Documents 5
3 TypographicalConvenons 6
4 SafetyInstrucons 8
5 General Notes 12
Scope of Delivery 12
Transportaon and Packaging 12
Warranty 13
Appropriate Use 13
Operaon 14
Approvals/Cercaons 15
6 Requirements 16
Ambient Condions 16
Power Supply 17
7 Maintenance 20
8 InstallaonandCommissioning 22
9 Interfaces 40
10 InserngaMemoryCard 42
11 Pin Assignment – Interface Board Series 5100 44
12 ConneconandLogin 49
Connecon 50
Login 51
13 TechnicalSpecicaons 52
14 Dimensions 55

4© 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
1 Validity
This document applies to the following devices:
• DDF5120HDV-DN-IM
• DDF5140HDV-DN-IM
For reasons of simplicaon, the term “device” or “camera” is used in the following.
Figures in this document may dier from the actual product.
2 Documents
The product documentaon for the device contains several documents which are
included in the scope of delivery in a printed form and/or on a digital medium.
Addional informaon, if available, is provided exclusively on the website
www.dallmeier.com.
Read the complete product documentaon for the device carefully and thoroughly
before using the device.
Always follow the instrucons, notes and warnings and observe the technical
specicaons in the currently valid product data sheet.
Keep all documents in legible condion and in a suitable locaon for future refer-
ence.
Regularly check the website www.dallmeier.com for the latest product documen-
taon updates.

© 2018 Dallmeier | www.dallmeier.com 5
Commissioning DDF51(X)0HDV-DN-IM
This Document
Commissioning
The document entled “Commissioning” (this document) contains detailed infor-
maon concerning the installaon, connecon and commissioning of the device as
well as safety instrucons and general notes.
The target audience of this document is trained system integrators (video security/
surveillance systems installaon contractors).
Other Applicable Documents
Data Sheet
The product data sheet contains detailed technical specicaons, features and
characteriscs of the device.
The target audience of the document is trained system integrators (video security/
surveillance systems installaon contractors).
Conguraon
The document entled “Conguraon” contains detailed informaon concerning
the conguraon of the device.
The target audience of the document is trained system integrators (video security/
surveillance systems installaon contractors).

6© 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
3 TypographicalConvenons
This document may contain various warning words and symbols that indicate
potenal sources of danger:
DANGER
DANGER indicates a hazardous situaon which, if not avoided,
will result in death or serious injury.
WARNING
WARNING indicates a hazardous situaon which, if not avoided,
could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situaon which, if not avoided,
could result in minor or moderate injury.
NOTICE
NOTICE addresses pracces not related to physical injury, such as
device and/or property damage due to faulty operaons or incor-
rect conguraons.

© 2018 Dallmeier | www.dallmeier.com 7
Commissioning DDF51(X)0HDV-DN-IM
For reasons of clarity and readability, various text formang elements and types
of emphasis are used in this documentaon:
Instrucons are indicated by arrows (➡).
➡Always carry out instrucons one aer the other in the sequence described.
“Expressions” in quotaon marks usually refer to individual components of the
device (housing parts, mounng elements, connecons/interfaces, etc.) or to
control elements of the device’s web-based graphical user interface (menu items,
buons, etc.).
Paragraphs in italics provide informaon on basic principles, special features
and ecient procedure as well as general recommendaons.

8© 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
4 SafetyInstrucons
Only use the device if it is technically in proper working condion and for the
intended purpose while keeping safety and potenal dangers in mind.
• QualiedPersonnel
The assembly, installaon, connecon, commissioning and conguraon of the
device may only be carried out by qualied personnel.
This also applies to the maintenance, inspecon and repair of the device in
complying with the regulaons of the DIN VDE 0701-0702 series of standards
(VDE 0701-0702: “Inspecon aer repair, modicaon of electrical appliances
– Periodic inspecon on electrical appliances – General requirements for
electrical safety”).
• Regulaons
The use of video and audio surveillance systems is, in general, strictly regu-
lated. Inform yourself about the currently valid laws and regulaons regarding
data, worker and environmental protecon before using the device and ensure
compliance with them.
• System Components
Only use internal components that have been tested and approved by Dallmeier.
Inappropriate internal components may cause malfuncons, damages and data
loss and may result in the loss of warranty.

© 2018 Dallmeier | www.dallmeier.com 9
Commissioning DDF51(X)0HDV-DN-IM
• Modicaons
Do not make any modicaons to the hardware or soware that have not been
tested and approved by Dallmeier.
Inappropriate modicaons may cause malfuncons, damages and data loss
and may result in the loss of warranty.
• Documentaon
The product documentaon for the device contains several documents which
are included in the scope of delivery in a printed form and/or on a digital me-
dium. Addional informaon, if available, is provided exclusively on the website
www.dallmeier.com.
Read the complete product documentaon for the device carefully and thor-
oughly before using the device. Always follow the contained instrucons, notes
and warnings and observe the technical specicaons in the currently valid
product data sheet.
Keep all documents in legible condion and in a suitable locaon for future
reference.
Regularly check the website www.dallmeier.com for the latest product docu-
mentaon updates.
• CondensaonWater
If the device is brought from a cold to a warm environment, resulng condensa-
on water may cause malfuncons and damages.
In this case, wait (up to 8 hours) unl the device has reached room temperature
before commissioning.

10 © 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
• Earthing&EquipotenalBonding
For the safety of persons (protecon against dangerous contact voltages)
and devices (protecon against over-voltages) as well as for the immunity of
informaon and communicaon technology equipment to electromagnec in-
terferences (EMI), all protecve measures, which are specied by the currently
applicable DIN, VDE and ISO standards and which provide for a standard-com-
pliant grounding/earthing and a correct equipotenal bonding of electrical and
electronic devices, are mandatory and must be fullled by all means.
• LightningStorms
To avoid damage to the device by electrical surge during lightning storms, all
protecve measures, which are specied by the currently applicable DIN, VDE
and ISO standards and which provide for a standard-compliant lightning protec-
on equipotenal bonding, are mandatory and must be fullled by all means.
• OperangCondions
Unfavorable operang condions may shorten the lifeme of the device and
may cause malfuncons, damages and data loss and may result in the loss of
warranty.
Observe the specicaons given in the technical data, the operang condion
requirements and the maintenance instrucons.
• Foreign Bodies
If objects or liquids get into the device, immediately disconnect it from the
power supply (pull out the power plug or disconnect the device from the PoE
enabled PSE port).
Contact the sales partner responsible for your area.

© 2018 Dallmeier | www.dallmeier.com 11
Commissioning DDF51(X)0HDV-DN-IM
• Burnt Smell
If you noce burnt smell or a formaon of smoke coming from the device,
immediately disconnect it from the power supply (pull out the power plug or
disconnect the device from the PoE enabled PSE port).
Contact the sales partner responsible for your area.
• Opening
The device may only be opened by qualied personnel for commissioning,
inspecon, maintenance and repair.
• Disposal
Do not dispose waste electrical and electronic equipment into the household
trash.
Disconnect the device from the power supply.
Remove all connected devices.
Return the device to the sales partner responsible for your area.

12 © 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
5 General Notes
Scope of Delivery
The standard scope of delivery includes:
• Security Torx*) L-wrench with hollow point (T20 H) for
tamper-resistant housing screws (Torx-TR 20)
• Pre-assembled Cat.5e RJ45 adapter cable with rubber grommet (length 150 mm)
• Ceiling hook, safety cable (steel wire rope with two loops) and carabiner
• PG16 cable gland with sealing insert and sealing ring on connecon thread
• Product documentaon (published in print and/or on DVD-ROM)
The scope of delivery may dier depending on the ordered equipment, device
variant or country of desnaon.
TransportaonandPackaging
Store the original packaging for later transportaon.
Dallmeier is not responsible for any damage resulng from unprofessional or
improper transportaon.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used packaging suf-
ciently protects the device against damage, moisture, heat and cold.

© 2018 Dallmeier | www.dallmeier.com 13
Commissioning DDF51(X)0HDV-DN-IM
Warranty
The terms and condions valid at the me the contract was signed shall apply.
AppropriateUse
The DDF51(X)0HDV-DN-IM (in-ceiling mount variant) is a HD network camera that
is built into a vandal-resistant (IK10) dome enclosure.
The device is exclusively designed for indoor installaons in suspended ceilings
or drywall (plasterboard) systems and can be operated with Power over Ethernet
(PoE, Class 0, IEEE 802.3af) or oponally powered by an external 12 V DC power
supply unit (only if the device is equipped ex factory with the “Interface Board
Series 5100”).
NOTICE
Damagetothedeviceduetoanunsuitablemounnglocaon
The device is exclusively designed for indoor use.
An outdoor installaon is prohibited and may result in malfuncon,
damage, data loss and loss of warranty.
➡Do not install/operate the device in outdoor environments.

14 © 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
Operaon
• If the device is powered by an external DC power supply unit (i.e. is not operated
with Power over Ethernet), interference caused by a ground loop may occur
in the analog video preview signal. In this case, use a video signal transformer
(balun) for galvanic (ground) isolaon between the signal source (this camera)
and the RG-59 cable.
• In order to prevent damage to the device, a galvanic isolator (balun) must be
installed if the BNC interface is permanently in use.
• If the device or the cables connected to the device are located near sources
with strong radiaon, the video image may be distorted.
• The device is equipped with Automac Gain Control (AGC). In low-light condi-
ons the image may be altered (e.g. noise). This is not a malfuncon.
• The quality of the video image depends on the lighng condions and the used
monitor.
• The accuracy of the Automac White Balance (AWB) algorithm depends on the
used lighng. Mixed light (consisng of arcial light and daylight) may cause
color distorons (inaccurate color reproducon).
• Poor lighng can lead to an incorrect white balance.

© 2018 Dallmeier | www.dallmeier.com 15
Commissioning DDF51(X)0HDV-DN-IM
Approvals/Cercaons
The following approvals/cercaons were valid for the device at the me of this
document’s compilaon:
• CE, FCC, RCM, UL, DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Note(USA)
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protecon against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instrucon manual, may cause harmful interfer-
ence to radio communicaons. Operaon of this equipment in a residenal area is likely to
cause harmful interference in which case the user will be required to correct the interference
at his own expense.

16 © 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
6 Requirements
AmbientCondions
The device is exclusively designed for indoor use.
NOTICE
Damagetothedeviceduetounfavorableambientcondions
Unfavorable local condions may shorten the lifeme of the device
and may cause malfuncons or damages.
➡Do not install/operate the device in places
• with a large amount of dust and dirt,
• with steam or oil vapors (e.g. kitchen),
• with direct sunlight,
• with strong heat emissions (e.g. radiator),
• with improper ambient temperatures,
• near sources with strong radiaon (e.g. radio transmiers,
magnec elds),
• with corrosive surroundings (e.g. gases, salt water),
• with insucient air venlaon (e.g. closed cabinet).

© 2018 Dallmeier | www.dallmeier.com 17
Commissioning DDF51(X)0HDV-DN-IM
Power Supply
The device is by default operated with Power over Ethernet (PoE, Class 0) and is
compable with all Power Sourcing Equipment (PSE) that is compliant with the
IEEE 802.3af PoE standard.
Oponally, the device can also be powered by an external 12 V DC power supply
unit if the device is equipped ex factory with the “Interface Board Series 5100”.
WARNING
Electricalshockcausedbyexposedelectricalpartsandduetothe
lackoforimpropergrounding/earthing
Risk of death or serious injury
➡The installaon of the device and the connecon of peripheral
equipment may only be carried out by qualied personnel and
in a voltage-free state.
➡Before connecng or disconnecng an external DC power sup-
ply unit, make sure that the power supply unit is disconnected
from the mains socket (pull the power plug out of the socket).
➡Carry out all protecve measures for a standard-compliant
grounding/earthing of the device in accordance with the cur-
rently applicable DIN, VDE and ISO standards in order to ensure
the safety of persons (protecon against dangerous contact
voltages).

18 © 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
NOTICE
Damage to the device due to improper power supply
Damage to electronic components or serious malfuncons
➡Always ensure the correct polarity when connecng an external
DC power supply unit.
➡Do not operate the device with Power over Ethernet (PoE) if the
device is powered by an external DC power supply unit.
Damagetothedeviceormalfunconsduetothelackoforim-
proper grounding/earthing
Damage to electronic components caused by lightning strikes and
over-voltages (electrical surges) or malfuncons due to electro-
magnec interferences
➡Carry out all protecve measures for a standard-compliant
grounding/earthing and a correct equipotenal bonding of the
device in accordance with the currently applicable DIN, VDE and
ISO standards in order to ensure the safety of the device (pro-
tecon against over-voltages) and its immunity to electromag-
nec interferences (EMI).

© 2018 Dallmeier | www.dallmeier.com 19
Commissioning DDF51(X)0HDV-DN-IM
NOTICE
DamagetothecontactsoftheRJ45connectorswhenun-mang
thejack-plugconneconunderPoEload
Un-mang the jack-plug connecon while transming PoE power
causes erosion and ping by electrical arcs on both the jack and
plug contacts (especially when repeatedly un-mang the jack-plug
connecon under PoE load). Electrical arcs are generated, since the
electric potenal dierence (voltage) and therefore the intensity
of the electric eld between the contacts rises sharply when un-
mang the jack-plug connecon.
The more un-mang cycles are carried out under PoE load, the
higher the loss of contact material due to metal evaporaon by
electrical arcs, which in turn accelerates the material erosion pro-
cess on the contact surfaces.
Damaged contacts with an increased contact resistance may lead
to a reduced data transfer rate, unreliable network connecvity or
even total device failure.
➡Always disable PoE on the relevant port of your PoE switch (or
PoE midspan device) or disconnect the used single-port PoE
injector from the power supply before un-mang the jack-plug
connecon in order to prevent damage to the contacts of the
RJ45 connectors by contact erosion.

20 © 2018 Dallmeier | www.dallmeier.com
DDF51(X)0HDV-DN-IM Commissioning
7 Maintenance
Maintenance and inspecon of the device may only be carried out by qualied
personnel on compliance with the regulaons of the DIN VDE 0701-0702 series
of standards (VDE 0701-0702: “Inspecon aer repair, modicaon of electrical
appliances – Periodic inspecon on electrical appliances – General requirements
for electrical safety”).
Cleaning
If it is necessary to clean the device, observe the following notes:
NOTICE
Damage to the surfaces of the device due to improper cleaning
pracces
➡Clean the housing (outside) with a clean, so, dry and anstac
cloth.
• Do not use detergents.
➡Clean the plasc dome/bubble with water and some hand
dishwashing liquid using a clean, so and non-linng cloth or
sponge.
• Do not rub the plasc bubble with a dry cloth.
• Do not use common glass cleaners.
• Avoid excessive rubbing.
• To dry the plasc bubble, dab it carefully and gently with a
clean, so, dry and anstac cloth to avoid scratching the
surface.