dallmeier DF4900HD Operating and maintenance instructions

English
Rev. 1.0.2 / 2010-08-12
Installation and Configuration
High Definition IP Box Camera
DF4500HD
720p
DF4900HD
1080p


www.dallmeier.com 

© 2010 Dallmeier electronic
The reproduction, distribution and utilization of this document as well as the communication of
its contents to others without express authorization is prohibited. Offenders will be held liable for
the payment of damages. All rights reserved in the event of the grant of a patent, utility model or
design.
We reserve the right to make technical modications.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those not
caused by intention or gross negligence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
93051 Regensburg, Germany
www.dallmeier.com
[e-mail]
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
All trademarks identied by *) are trademarks or registered trademarks of the following owners:
Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA
IBM of International Business Machines Corporation headquartered in Armonk, New York, USA
Microsoft, ActiveX, DirectX, Internet Explorer, Windows and Windows Vista of Microsoft Corporation headquartered in Redmond,
Washington, USA
Third-party trademarks are named for information purposes only.
Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identication of third-party
trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circumstance is
no reason to assume that the respective trademark is unprotected.


www.dallmeier.com 

 
1.1 Validity .............................................................................................................5
1.2 Documents ......................................................................................................5
1.3 Conventions ....................................................................................................6
 
 
3.1 Scope of Delivery ............................................................................................9
3.2 Transportation and Packaging ........................................................................9
3.3 Appropriate Use ..............................................................................................9
3.4 Performance Features ....................................................................................9
3.5 Warranty .......................................................................................................10
3.6 Approvals/Certications ................................................................................10
 
4.1 General .........................................................................................................11
4.2 Power Supply ................................................................................................11
4.3 Operation ......................................................................................................11
 
 
6.1 Attaching the lens .........................................................................................13
6.2 Installation and Commissioning ....................................................................14
6.3 Back Focus ...................................................................................................14
6.3.1 Adjustment for Lenses with Fixed Focal Length ...........................................14
6.3.2 Adjustment for Lenses with Variable Focal Length (Zoom Lens) ..................14
 
7.1 System Requirements...................................................................................16
7.2 Connection ....................................................................................................16
7.3 Login .............................................................................................................18
 
8.1 Language ......................................................................................................20
8.2 System Time .................................................................................................20
8.2.1 Manual Conguration ....................................................................................21
8.2.2 Time Server ..................................................................................................21
8.3 Camera Name...............................................................................................22
8.4 User Management ........................................................................................22
8.4.1 Login Mode ...................................................................................................22
8.4.2 User Groups..................................................................................................23
8.4.3 User ..............................................................................................................24
8.4.3.1 Dene a User ................................................................................................24
8.4.3.2 Edit User .......................................................................................................25
8.4.4 Rights ............................................................................................................25
 
9.1 Basic Settings ...............................................................................................27
9.1.1 Manual Conguration ....................................................................................28
9.1.2 DHCP ............................................................................................................28


www.dallmeier.com 
9.2 Alarm Hosts ..................................................................................................29
9.2.1 Settings .........................................................................................................29
9.2.2 Messages......................................................................................................30
9.2.3 Scheduler ......................................................................................................30
9.2.3.1 Week Timer ...................................................................................................30
9.2.3.2 Exceptions ....................................................................................................32
9.2.3.3 Copy Exceptions ...........................................................................................34
9.2.4 Copy..............................................................................................................35
9.2.5 Delete Alarm Host Entry................................................................................36
9.3 Video Streaming ...........................................................................................37
9.3.1 Transfer Protocol and Format .......................................................................37
9.3.2 Transfer Method ............................................................................................38
9.3.3 TTL ................................................................................................................39
 
10.1 Video Standard .............................................................................................40
10.2 Sensor...........................................................................................................40
10.2.1 Global............................................................................................................41
10.2.2 Image Optimization .......................................................................................41
10.3 Encoder Settings...........................................................................................42
10.3.1 Encoder 1......................................................................................................42
10.3.2 Encoder 2......................................................................................................44
10.3.3 Encoder 3......................................................................................................44
10.3.4 Audio .............................................................................................................45
 
11.1 Data Display..................................................................................................46
11.1.1 Filter ..............................................................................................................46
11.1.2 Position .........................................................................................................47
 
12.1 Activations.....................................................................................................49
12.2 Event Log ......................................................................................................49
12.3 Conguration File ..........................................................................................50
12.3.1 Download ......................................................................................................50
12.3.2 Upload...........................................................................................................50
12.3.2.1 Conguration Recovery ................................................................................51
12.3.2.2 Conguration Transfer to Several Devices ...................................................51
12.4 Info ................................................................................................................53
 
13.1 Web Browser ................................................................................................54
13.2 RTSP Application ..........................................................................................54
 
 
15.1 DC Auto Iris Interface ....................................................................................57
15.2 LAN/PoE .......................................................................................................57
15.3 Audio OUT ....................................................................................................58
15.4 Power IN .......................................................................................................58
 
 


www.dallmeier.com 
 
 
This document applies to the following High Denition IP box cameras:
• 
• 
The descriptions in this document are based on the software version  and apply to all
above-mentioned device variants.
If text passages require distinctions to be made between the device variants, the complete
product names will be mentioned.
Pictures in this document may differ from the actual product.
 

The document entitled “Commissioning” contains the most important steps for the connec-
tion and commissioning of the device.

The document entitled “Installation and Conguration” contains detailed descriptions of
the installation, connection, commissioning and conguration of the device. Safety instruc-
tions, general notes and technical data are additionally provided.
The target audience is exclusively specially trained and authorized professionals (install-
ers).


www.dallmeier.com 
 
This document contains various warning words and symbols that indicate potential sources
of danger.

DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.

CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.

NOTICE indicates practices for preventing property damage, incorrect
congurations or faulty operations.
Instructions are indicated by arrows ().
Expressions in  generally indicate a control element on the device (switches or
labels) or on its user interface (buttons, menu entries).
Paragraphs in italics provide information on basic principles, special features and efcient
procedure as well as general recommendations.


www.dallmeier.com 
 
Only use this unit if it is technically in proper working order, to the intended purpose and
while keeping safety and potential dangers in mind.

Installation, mounting, connection, commissioning and conguration of the unit may only
be carried out by qualied personnel. This also applies to the maintenance, testing and re-
pair, whereat the regulations of the DIN VDE 0701 series of standards (repair, modication
and inspection of electrical appliances) must be followed.

The use of video and audio surveillance systems in general is strictly regulated. Inform
yourself about the applicable laws and regulations regarding data, working and environ-
mental protection before using the unit and ensure compliance with them.

Only use internal components that have been tested and approved by Dallmeier. Inappro-
priate internal components can cause malfunctions, damages and data loss and can result
in loss of warranty.

Do not make any modications to the hardware or software that has not been tested and
approved by Dallmeier. Inappropriate modications can cause malfunctions, damages and
data loss and can result in loss of warranty.

Carefully and completely read the documents included in delivery. Always observe the
contained instructions, notes and warnings.

If the unit is brought from a cold to a warm environment, resulting condensation water
can cause malfunctions and damages. In this case wait (up to 8 hours) until the unit has
reached room temperature before commissioning.

Unfavourable operating conditions can shorten the life of the unit and can cause malfunc-
tions, damages and data loss and can result in loss of warranty. Observe the specications
given in the technical data, the operating condition requirements and the maintenance
instructions.

Shocks can cause malfunctions and damages. The unit may not be moved while in opera-
tion.

If objects or liquids get into the unit, immediately disconnect it from the power supply (pull
out the power plug). Contact the sales partner responsible for your area.


www.dallmeier.com 

If you notice burnt smell or formation of smoke from the unit, immediately disconnect it from
the power supply (pull out the power plug). Contact the sales partner responsible for your
area.

The housing of the unit may only be opened by qualied personnel for commissioning,
inspection, maintenance and repair.

Disconnect the unit from the power supply. Remove all connected devices. Return the unit
to your respective sales partner.


www.dallmeier.com 
 
 
Included in the standard scope of delivery is:
1× DF4900HD / DF4500HD
1× Documentation “Installation and Conguration” (CD)
1× Documentation “Commissioning” (in print)
The scope of delivery may differ depending on the ordered equipment, the device variant
or the country of destination.
The functional range of the device depends on the ordered equipment or device variant
and may differ from this document’s content. Certain functions and features may require an
activation that is subject to costs.
 
Store the original packaging for transportation at a later date. Dallmeier electronic is not
responsible for damage resulting from unprofessional/improper transportation. The goods
should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufciently
protects the unit against damage, moisture, heat and cold.
 
The DF4900HD / DF4500HD is a High Denition IP box camera. It is designed
for indoor installations for indoor installations on ceiling/wall brackets and can be operated
via PoE (Power over Ethernet, Class 0) or at 12 V DC.
 
• 1/2.5" 5-Megapixel CMOS image sensor with technology
• Pure Digital Signal Processing
• Light sensitivity at F1.0, 50 IRE: 1.6 lux (in day mode at 720p/1080p)
• Enhanced image quality by means of numerous control functions such as AWB, AGC
and slow shutter
• Resolution: SD, HD (DF4900HD: 720p, 1080p, 3MP; DF4500HD: 720p, 2MP)
• Frame rate up to 30 fps
• Video compression: H.264, MJPEG
• Simultaneous Dual- or Tri-Streaming
• Digital noise reduction
• Hybrid IP camera with analogue video preview output
• Alarm messaging function
• Local video memory: integrated SDHC card slot
• Voltage supply: 12 V DC or PoE
• DIN EN 50130-4 compliant
For detailed information see chapter “Technical Data” on page 59.


www.dallmeier.com 
 
The terms and conditions valid at the signing of the contract shall apply.
 
Following approvals/certications were valid at the time of document compilation.
Refer to www.dallmeier.com for possible updates.
• CE
• DIN 50130-4 compliant


www.dallmeier.com 
 
 
Unfavourable local conditions may shorten the life of the product and can cause malfunc-
tions or damages.
Do not install/operate the device in places
• with large scale dust and dirt.
• with steam or oil vapours (e.g. kitchen).
• with direct sunlight.
• strong heat emission (e.g. radiator).
• with improper ambient temperatures.
• near sources of strong radiation (e.g. radio transmitters, magnetic elds).
• with corrosive surroundings (e.g. gases, salt water).
• insufcient air ventilation (e.g. closed cabinet).
 
The device can be operated via PoE (Power over Ethernet, Class 0) or at 12 V DC.
Ensure that the existing network supports the PoE standard IEEE 802.3af if you want
to supply the device with power over Ethernet.
 
Observe the following notes for the operation of the device:
• If the device or the cables connected to the device are located near sources of strong
radiation, the video image may be distorted.
• The device is equipped with automatic gain control (AGC). In low light the image may
be altered (e.g. noise). This is not a malfunction.
• The quality of the video image depends on the lens, the lighting and the used moni-
tor.
• Automatic white balance depends on the lighting used and can cause colour distor-
tions in articial light.
• Poor lighting can lead to faulty white balance.


www.dallmeier.com 
 
CS lens mount and
back focus adjustment ring
Locking screw for
back focus adjustment ring
(M4×4 hexagon socket screw,
wrench size 3)
¼" tripod socket (on top and bottom side)
for camera mounting
DC auto iris lens
Locking screw
(focal length)
Locking screw
(focus)
Fig. 5-1
The lens shown in Fig. 5-1 is illustrative only and may differ from the actual product.
LAN / PoE
(RJ45 jack)
Power IN (12 V DC)
Weidmüller male connector
SL 3.50/02/90G
Audio OUT
(3.5 mm phone jack)
Power LED
Video preview output
(BNC, CVBS)
DC auto iris interface
for iris control
LAN LED SDHC
card slot
Fig. 5-2


www.dallmeier.com 
 
Installation and commissioning of the unit may only be carried out by qualied personnel.


Danger of death or serious injury
Disconnect the power supply unit from the mains socket before connect-
ing the device.
In order to comply with the UL requirements, you have to use a UL-certied, limited power
source (LPS) Class 2 power supply unit.
 
Lens
Lens thread
Max. 5 mm
Fig. 6-1


The length of the lens thread plus any protruding parts must not exceed
5 mm.
If using a C-mount lens, you have to screw a C-/CS-mount adapter ring
(5 mm) between the lens and the camera.
To attach the lens, proceed as follows:
Remove the rear lens cap and the camera body cap.
Screw the lens carefully into the CS lens mount (Fig. 5-1).
If using a DC auto iris lens, connect the lens cable to the DC auto iris interface (Fig.
5-2).
The camera is by default congured for use with DC auto iris lenses.
If using a lens with manual iris control, you have to recongure the camera accordingly (see
section “Sensor” on page 40). Video signal-controlled lenses are not supported.


www.dallmeier.com 
 
The camera has a ¼" tripod socket located on the top and bottom side.


Use the correct type of of mounting equipment:
• ¼" tripod screw (max. length 7 mm) for ceiling/wall bracket
• Weather-proof housing for outdoor installations
Mount the camera with an appropriate tripod screw on the ceiling/wall bracket.
Connect the required cables to the connectors on the camera back side.
Connect a CVBS monitor to the video preview output.
If PoE (Power over Ethernet) is not available, connect the camera to a suitable power
supply unit and then connect the power supply unit to the mains socket.
Align the camera and set the focal length and focus.
Disconnect the CVBS monitor.
 
The back focus (focal ange length) is the distance between the rear lens element and the
image sensor. Optimum focus is only possible if the correct distance is set.
It may be necessary to adjust the back focus in individual cases due to production toler-
ances of the lens.
To adjust the back focus, the iris of the lens must be open as wide as possible (smallest
iris value). For lenses with automatic iris control, you will require a ND lter (gray lter) to
prevent the iris from closing in bright light.
 
If the focus cannot be set exactly with the focus ring of the lens, proceed as follows:
Point the camera at an object with sufcient contrast.
The distance to the object should be greater than 1000× the focal length.
Open the iris of the lens.
Set the distance at the lens to innity (∞).
Loosen the locking screw of the back focus adjustment ring.
Set the optimum focus with the back focus adjustment ring.
Tighten the locking screw of the back focus adjustment ring
 
If the focus changes as the focal distance changes, proceed as follows:
Point the camera at an object with sufcient contrast at a distance of approx. 2 m.
Open the iris of the lens.
Set the maximum focal length (tele end) at the lens.
Set the optimum focus with the focus ring of the lens.
Set the smallest focal length (wide end) at the lens.


www.dallmeier.com 
Loosen the locking screw of the back focus adjustment ring.
Set the optimum focus with the back focus adjustment ring.
You may need to repeat the last 4 steps several times to obtain the best results.
Tighten the locking screw of the back focus adjustment ring.


www.dallmeier.com 
 
The conguration of the device is carried out with a PC/web browser via the local area
network (LAN).
Alternatively, the PC can be directly connected to the device via an Ethernet crossover
cable.
 
To congure the device with live video display, the PC must meet the following minimum
system requirements:
 IBM*)-PC compatible
 1.3 GHz
 256 MB
  Microsoft*) Windows*) 2000
Microsoft Windows XP
Windows Vista*)
each with latest service pack
 Microsoft Internet Explorer*), latest version
 DirectX*) 9.0 compatible
 100 Mbps
 Adobe*) Flash*) Player, latest version
Dallmeier control for ActiveX*), latest version
Note that
• a more powerful PC is required if several devices are congured with live video display
simultaneously.
• a DirectX compatible graphics card and the Dallmeier control for ActiveX are not re-
quired for the conguration without live video display.
• the Dallmeier control for ActiveX can be downloaded from the Dallmeier Partner Forum.
• the Dallmeier control for ActiveX can be automatically downloaded via Internet after the
connection to the device (only with Microsoft Internet Explorer and if it is not already
installed).
• the conguration without live video display may be possible with any operating system
and web browser. However, the Adobe Flash Player is always required for the congu-
ration.
 
The factory default IP address of the device is .
Ensure that the PC/web browser can establish a connection to the device via Ethernet.
Start the web browser.
Enter the IP address of the device into the address bar of the web browser.
Conrm the input.


www.dallmeier.com 
The connection to the device is established.
The graphical user interface (GUI) of the live mode is displayed.
 
Fig. 7-1 Live mode with adjustable video resolution
 Hide/show title bar
 Switch between live and conguration mode
 Live video
 Adjust video resolution
 IP address of device
 Log out of conguration mode
Note the explanations below.
Hide the title bar () if required.
Activate the  checkbox if required.
Adjust the live video resolution () if required.
This resolution setting only affects the live video display in the web browser and is not re-
lated to the encoder settings.


www.dallmeier.com 

If the network connection to the device is established via a router/gateway with NAT (Net-
work Address Translation) function, the live video may not be shown in certain circum-
stances. In this case, two solutions are available:
The router/gateway has to be congured for a correct address translation of data packets
sent by the User Datagram Protocol (UDP). UDP is by default used by the streaming func-
tion of the device.
An easier solution is to activate the  checkbox. In this case,
the device switches the protocol of the streaming function to the Transmission Control Pro-
tocol (TCP). To receive the data packets, the port 30000 for the DaVid Protocol1 and port
80 for the Hypertext Transfer Protocol (HTTP) must be open.
Note that at data transmission over TCP
• normally no packet loss (lack of images) occurs.
• short-term peaks in network trafc may occur.
• low delays may occur.
The “Networks with routers (NAT)” function does not affect the “Video streaming” function
(see section “Video Streaming” on page 37).
 
The graphical user interface of the conguration mode is displayed after the successful
identication as authorized user.
Note that the factory default password of user group  is “”.

Risk of misuse by unauthorized users!
Change the factory default password as soon as possible.
Click  in the user interface of the live mode.
The login dialogue is displayed.
Fig. 7-2
Enter the  if required.
Enter the .
Conrm with .
1 Dallmeier Video Protocol


www.dallmeier.com 
The graphical user interface of the conguration mode is displayed.





Fig. 7-3 Conguration mode
 Hide/show title bar
 Switch between live and conguration mode
 IP address of device
 Log out of conguration mode
 Disable/enable live video display
 Live video
 Conguration menu
 Conguration dialogues
Note that
• the live video display in the conguration mode can be disabled if only a low bandwidth
is available.
• a new login is required after 5 minutes without user action.


www.dallmeier.com 
 
The basic settings and the user management are integrated in the  
menu.
 
The graphical user interface can be displayed in various languages.
Open the  dialogue via  > .
Fig. 8-1
Set the .
Deactivate the checkbox if network bottle-
necks occur or your system is overloaded.
Conrm with .
 
The system time can be set manually or synchronized with a UTC time server. The time
zone must be set in both cases.
Open the  dialogue via  > .
Select the  tab.
Fig. 8-2
Set the .
Conrm with .