dallmeier DF4910HD-DN Operating and maintenance instructions

English
Rev. 1.0.4 / 2013-09-09
Installation and Configuration
High-Definition IP Network Cameras
DF4910HD-DN
DDF4910HDV-DN-IM/-SM

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 2
Information about Copyright, Trademarks, Design Patents
© 2013 Dallmeier electronic
The reproduction, distribution and utilization of this document as well as the communication of
its contents to others without express authorization is prohibited. Offenders will be held liable for
the payment of damages. All rights reserved in the event of the grant of a patent, utility model or
design.
We reserve the right to make technical modications.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentation, e.g. print or spelling errors, and for those not
caused by intention or gross negligence of the manufacturer.
Dallmeier electronic GmbH & Co.KG
Cranachweg 1
93051 Regensburg, Germany
www.dallmeier.com
[e-mail]
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
All trademarks identied by *) are trademarks or registered trademarks of the following owners:
Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA;
AMD and AMD Athlon of Advanced Micro Devices, Inc. headquartered in Sunnyvale, California, USA;
IBM of International Business Machines Corporation headquartered in Armonk, New York, USA;
Intel and Pentium or Intel Pentium of Intel Corporation headquartered in Santa Clara, California, USA;
JavaScript of Oracle Corporation (and/or its afliates) headquartered in Redwood Shores, California, USA;
Linux of Linus Torvalds (in the USA and/or other countries);
Microsoft, ActiveX, DirectX, Internet Explorer, Windows, Windows Server and Windows Vista of Microsoft Corporation headquartered in
Redmond, Washington, USA
Third-party trademarks are named for information purposes only.
Dallmeier electronic respects the intellectual property of third parties and always attempts to ensure the complete identication of third-
party trademarks and indication of the respective holder of rights. In case that protected rights are not indicated separately, this circum-
stance is no reason to assume that the respective trademark is unprotected.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 3
Table of Contents
1 Introduction...................................................................................................6
1.1 Validity.............................................................................................................6
1.2 Documents......................................................................................................6
1.3 Typographical Conventions.............................................................................7
2 Safety Instructions........................................................................................8
3 General Notes..............................................................................................10
3.1 Scope of Delivery..........................................................................................10
3.2 Transportation and Packaging ......................................................................10
3.3 Warranty .......................................................................................................10
3.4 Approvals/Certications ................................................................................10
3.5 Appropriate Use............................................................................................11
3.6 Performance Features ..................................................................................12
4 Requirements..............................................................................................13
4.1 General .........................................................................................................13
4.2 Power Supply................................................................................................13
4.3 Earthing & Equipotential Bonding .................................................................13
4.4 Operation ......................................................................................................13
4.5 Outdoor Use..................................................................................................14
4.5.1 Box Camera DF4910HD-DN.........................................................................14
4.5.2 Dome Camera DDF4910HDV-DN-IM ...........................................................14
4.5.3 Dome Camera DDF4910HDV-DN-SM..........................................................14
5 Views and Connection Assignment ..........................................................15
5.1 Box Camera..................................................................................................15
5.2 Dome Cameras.............................................................................................17
5.2.1 In-ceiling Mount Variant (IM) .........................................................................17
5.2.2 Surface Mount Variant (SM)..........................................................................19
5.2.3 Camera Module ............................................................................................21
6 Installation and Commissioning................................................................22
6.1 Box Camera..................................................................................................22
6.1.1 Attaching the Lens ........................................................................................22
6.1.2 Installation and Commissioning ....................................................................23
6.1.3 Back Focus ...................................................................................................24
6.2 Dome Cameras.............................................................................................25
6.2.1 In-ceiling Mount Variant (IM) .........................................................................25
6.2.2 Surface Mount Variant (SM)..........................................................................29
7 Connection and Login................................................................................31
7.1 System Requirements...................................................................................31
7.2 Connection....................................................................................................32
7.3 Login .............................................................................................................34

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 4
8 Basic Settings .............................................................................................36
8.1 Language......................................................................................................36
8.2 System Time .................................................................................................36
8.2.1 Manual Conguration....................................................................................37
8.2.2 Time Server ..................................................................................................37
8.3 Camera Name...............................................................................................38
8.4 User Management ........................................................................................38
8.4.1 Login Mode ...................................................................................................38
8.4.1.1 Group Login ..................................................................................................39
8.4.1.2 User Login.....................................................................................................40
8.4.1.3 LDAP Login...................................................................................................41
8.4.2 Rights............................................................................................................44
9 Network........................................................................................................46
9.1 Basic Settings ...............................................................................................46
9.1.1 Manual Conguration....................................................................................48
9.1.2 DHCP............................................................................................................48
9.2 Streaming......................................................................................................49
9.2.1 Video Server .................................................................................................49
9.2.1.1 Transfer Protocol and Format .......................................................................49
9.2.1.2 Transfer Method............................................................................................50
9.2.1.3 TTL................................................................................................................51
9.2.1.4 RTCP ............................................................................................................51
9.2.2 Dynamic Servers...........................................................................................51
9.2.3 Audio Client...................................................................................................52
9.2.4 RTSP ............................................................................................................53
10 Video ............................................................................................................55
10.1 Video Standard .............................................................................................55
10.2 Sensor...........................................................................................................55
10.2.1 Global............................................................................................................56
10.2.2 Image Optimization.......................................................................................58
10.2.3 Day/Night ......................................................................................................59
10.3 Exposure Control ..........................................................................................61
10.4 Privacy Zones ...............................................................................................62
10.5 Encoder Settings...........................................................................................64
10.5.1 Encoder 1......................................................................................................64
10.5.2 Encoder 2......................................................................................................67
10.5.3 Encoder 3......................................................................................................67
10.5.4 Audio In.........................................................................................................68
11 Event Management .....................................................................................69
11.1 SMTP Server ................................................................................................70
11.2 FTP Server....................................................................................................72
11.3 Scheduler......................................................................................................74
11.3.1 Week Timer...................................................................................................74
11.3.2 Exceptions ....................................................................................................76
11.3.3 Copy Exceptions...........................................................................................78
11.4 Copy Event Settings .....................................................................................80
11.5 Delete Event Handler....................................................................................82

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 5
12 Interfaces.....................................................................................................83
12.1 Data Display..................................................................................................83
12.1.1 Filter..............................................................................................................83
12.1.2 Position .........................................................................................................84
13 Digital Image Shift.......................................................................................86
14 Service and Info ..........................................................................................88
14.1 Downloads ....................................................................................................88
14.2 Factory Settings............................................................................................88
14.3 Licenses........................................................................................................89
14.4 Event Log......................................................................................................89
14.5 Conguration File..........................................................................................90
14.5.1 Download......................................................................................................90
14.5.2 Upload...........................................................................................................91
14.5.2.1 Conguration Recovery ................................................................................91
14.5.2.2 Conguration Transfer to Several Devices ...................................................92
14.6 Info................................................................................................................93
15 Image Transmission ...................................................................................94
15.1 Web Browser ................................................................................................94
15.2 RTSP Application ..........................................................................................94
16 Maintenance ................................................................................................96
17 Pin Assignment...........................................................................................97
17.1 DC Auto Iris Interface....................................................................................97
17.2 LAN/PoE .......................................................................................................98
17.3 Audio OUT / Microphone IN..........................................................................98
17.4 Power IN .......................................................................................................98
18 Technical Data.............................................................................................99
19 Technical Drawings ..................................................................................100
19.1 Box Cameras ..............................................................................................100
19.2 Dome Cameras...........................................................................................101
19.2.1 In-ceiling Mount Variants (IM) .....................................................................101
19.2.2 Surface Mount Variants (SM)......................................................................102

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 6
1 Introduction
1.1 Validity
This document applies to the following devices:
• DF4910HD-DN
(IP network box camera, 5-megapixel, 1080p/30, Day/Night)
• DDF4910HDV-DN-IM
(IP network dome camera, in-ceiling mount variant, 5-megapixel, 1080p/30, Day/Night)
• DDF4910HDV-DN-SM
(IP network dome camera, surface mount variant, 5-megapixel, 1080p/30, Day/Night)
The descriptions in this document are based on the software version 6.1.2.4 and apply to
all above-mentioned devices.
If text passages require distinctions to be made between the devices, the complete prod-
uct names will be mentioned.
Pictures in this document may differ from the actual product.
1.2 Documents
Commissioning
The document entitled “Commissioning” contains the most important steps for the con-
nection and commissioning of the respective device.
Installation and Conguration (this document)
This document contains detailed descriptions of the installation, connection, commission-
ing and conguration of the above-mentioned devices.
In addition, safety instructions, general notes and technical data/drawings are provided.
The target audience is trained and authorized professionals (installers).

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 7
1.3 Typographical Conventions
This document may contain various warning words and symbols that indicate potential
sources of danger.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
NOTICE indicates practices for preventing property damage, incorrect
congurations or faulty operations.
For reasons of clarity and readability, various text formatting elements and types of em-
phasis are used in this documentation:
Instructions are indicated by arrows ().
Always carry out instructions one after the other in the sequence described.
Expressions in bold/italics generally indicate a control element on the device (switches
or labels) or on its user interface (buttons, menu entries).
Paragraphs in italics provide information on basic principles, special features and efcient
procedures as well as general recommendations.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 8
2 Safety Instructions
Only use the units described in this document if they are technically in proper working
condition and for the intended purpose while keeping safety and potential dangers in
mind.
Qualied Personnel
The installation, mounting, connection, commissioning and conguration of the units may
only be carried out by qualied personnel.
This also applies to the maintenance, testing and repair, whereat the regulations of the
DIN VDE 0701 series of standards (repair, modication and inspection of electrical appli-
ances) must be followed.
Regulations
The use of video and audio surveillance systems is, in general, strictly regulated.
Inform yourself about the currently valid laws and regulations regarding data, worker and
environmental protection before using the units and ensure compliance with them.
System Components
Only use internal components that have been tested and approved by Dallmeier.
Inappropriate internal components may cause malfunctions, damages and data loss and
may result in the loss of warranty.
Modications
Do not make any modications to the hardware or software that have not been tested and
approved by Dallmeier.
Inappropriate modications may cause malfunctions, damages and data loss and may
result in the loss of warranty.
Documentation
Read the documents included in the delivery carefully and thoroughly.
Always observe the contained instructions, notes and warnings.
Condensation Water
If the units are brought from a cold to a warm environment, resulting condensation water
may cause malfunctions and damages.
In this case, wait (up to 8 hours) until the units have reached room temperature before
commissioning.
Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages) and devices
(protection against overvoltages) and the immunity of information and communication
technology equipment to electromagnetic interferences (EMI), all protective measures,
which are specied by the currently valid DIN, VDE and ISO standards and which provide
for a standard-compliant earthing and a correct equipotential bonding of electrical and
electronic devices, are mandatory and must be fullled by all means.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 9
Lightning Storms
To avoid damage to the units by electrical surge during lightning storms, unplug the units
from the mains power supply (pull out the power plug).
This is also recommended, when the units have been unused for a long period of time.
Operating Conditions
Unfavourable operating conditions may shorten the life of the units and may cause mal-
functions, damages and data loss and may result in the loss of warranty.
Observe the specications given in the technical data, the operating condition require-
ments and the maintenance instructions.
Shocks
Shocks may cause malfunctions and damages.
The units may not be moved while in operation.
Foreign Bodies
If objects or liquids get into the units, immediately disconnect them from the power supply
(pull out the power plug).
Contact the sales partner responsible for your area.
Burnt Smell
If you notice burnt smell or a formation of smoke coming from the units, immediately dis-
connect them from the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
Opening
The housings of the units may only be opened by qualied personnel for commissioning,
inspection, maintenance and repair.
Disposal
Do not dispose waste electrical and electronic equipment into the household trash.
Disconnect the units from the power supply.
Remove all connected devices.
Return the units to your respective sales partner.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 10
3 General Notes
3.1 Scope of Delivery
Included in the standard scope of delivery is:
1× IP network camera (depending on the product ordered)
1× Documentation “Installation and Conguration” (published on CD-ROM)
1× Documentation “Commissioning” (published in print and on CD-ROM)
In addition, all screws and dowels that are necessary for a proper installation of the or-
dered network camera are included.
The scope of delivery may differ depending on the ordered equipment, the device variant
or the country of destination.
The functional range of the devices depends on the ordered equipment or device variant
and may differ from this document’s content.
Certain functions and features may require the purchase of an additional license.
3.2 Transportation and Packaging
Store the original packaging for transportation at a later date.
Dallmeier is not responsible for any damage resulting from unprofessional/improper trans-
portation.
The goods should only be shipped in their original packaging.
If the original packaging is no longer available, ensure that the packaging used sufciently
protects the units against damage, moisture, heat and cold.
3.3 Warranty
The terms and conditions valid at time the contract was signed shall apply.
3.4 Approvals/Certications
The following approvals/certications were valid for all devices described in this document
at the time of this document’s compilation:
• CE
• FCC
• ACA
• UVV-Kassen (DGUV Test)
• DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 11
3.5 Appropriate Use
DF4910HD-DN
The DF4910HD-DN is a 5-megapixel Full High-Denition (1080p/30) IP network box cam-
era with automatic Day/Night operation supported by integrated ambient light sensing and
a removable IR cut lter.
It is designed for indoor installations on ceiling/wall brackets and can be powered via PoE
(Power over Ethernet Class 0, IEEE 802.3af) or supplied with 12 V DC (separate power
supply unit required).
DDF4910HDV-DN-IM
The DDF4910HDV-DN-IM is a vandal-resistant 5-megapixel Full High-Denition
(1080p/30) IP network dome camera with automatic Day/Night operation supported by
integrated ambient light sensing and a removable IR cut lter.
It is exclusively designed for indoor installations in suspended ceilings and can be pow-
ered via PoE (Power over Ethernet Class 0, IEEE 802.3af) or supplied with 12 V DC
(separate power supply unit required).
DDF4910HDV-DN-SM
The DDF4910HDV-DN-SM is a vandal-resistant 5-megapixel Full High-Denition
(1080p/30) IP network dome camera with automatic Day/Night operation supported by
integrated ambient light sensing and a removable IR cut lter.
It is designed for indoor installations on ceilings and walls and can be powered via PoE
(Power over Ethernet Class 0, IEEE 802.3af) or supplied with 12 V DC (separate power
supply unit required).

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 12
3.6 Performance Features
The following list of features is valid for all devices described in this document:
• 1/2.5" 5-megapixel CMOS image sensor with Dallmeier technology
• Pure Digital Signal Processing
• Real-time HD video
• Automatic Day/Night switching using ambient light sensing and ICR1) function (switching
threshold level adjustable)
• High light sensitivity of 0.45 lux (at F0.95, 50 IRE, ICR1) On)
• Video compression: H.264, MJPEG
• Frame rate up to 30 fps
• Simultaneous Dual- or Tri-Streaming
• Automatic White Balance (ATW, One-Push AWB)
• Automatic Gain Control (AGC)
• Automatic Electronic Shutter (AES)
• Comprehensive set of image optimization functions, such as brightness,
contrast, saturation and sharpness
• 3D Digital Noise Reduction (3D DNR)
• Three different exposure metering modes:
average metering (light information from entire scene),
centre-weighted average metering and spot metering
• Privacy Zone Masking (hiding/masking of protected areas)
• Flip function (horizontal, vertical or both)
• Digital Image Shift2)
• Alarm notication via e-mail and FTP image upload
• Hybrid IP camera with analogue preview output
• Audio OUT3) / Microphone IN3)
• Voltage supply with 12 V DC or via PoE (Class 0, IEEE 802.3af)
• Low power consumption (max. 4.5 W)
• ONVIF compliant
• DIN EN 50130-4 compliant
For device-specic features, see the relevant product data sheet.
1) ICR = IR Cut Filter Removable
2) Provides digital ne alignment of image section (only applicable at resolutions less than 5 MP)
3) Audio IN/OUT Y-Cable Connector FGA-30 required (optionally available).

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 13
4 Requirements
4.1 General
Unfavourable local conditions may shorten the life of the products and may cause mal-
functions or damages.
Do not install/operate the devices in places
• with a large amount of dust and dirt,
• with steam or oil vapours (e.g. kitchen),
• with direct sunlight,
• with strong heat emissions (e.g. radiator),
• with improper ambient temperatures,
• near sources with strong radiation (e.g. radio transmitters, magnetic elds),
• with corrosive surroundings (e.g. gases, salt water),
• with insufcient air ventilation (e.g. closed cabinet).
4.2 Power Supply
The devices can be powered via PoE (Power over Ethernet, Class 0) or supplied with
12 V DC (separate power supply unit required).
Ensure that the existing network supports the PoE standard IEEE 802.3af if you want
to supply the devices with power over Ethernet.
4.3 Earthing & Equipotential Bonding
For the safety of persons (protection against dangerous contact voltages) and devices
(protection against overvoltages) and the immunity of information and communication
technology equipment to electromagnetic interferences (EMI), all protective measures,
which are specied by the currently valid DIN, VDE and ISO standards and which provide
for a standard-compliant earthing and a correct equipotential bonding of electrical and
electronic devices, are mandatory and must be fullled by all means.
4.4 Operation
Observe the following notes for the operation of the devices:
• If the devices or the cables connected to the devices are located near sources with
strong radiation, the video image may be distorted.
• The devices are equipped with an automatic gain control (AGC). In low light condi-
tions the image may be altered (e.g. noise). However, this is not a malfunction.
• The quality of the video image depends on the lens, the lighting conditions and the
used monitor.
• The accuracy of the automatic white balance (AWB) algorithm depends on the light-
ing used. Mixed light (consisting of articial light and daylight) may cause colour
distortions (inaccurate colour reproduction).
• Poor lighting can lead to a faulty white balance.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 14
4.5 Outdoor Use
4.5.1 Box Camera DF4910HD-DN
The box camera DF4910HD-DN is designed for indoor use.
For outdoor use, the camera must always be installed in a proper weather-proof housing.
However, note that direct sunlight can cause very high temperatures inside the housing.
In this case, it is absolutely necessary to use a ventilated, temperature-controlled weath-
er-proof metal housing and a sunshield where required.
In addition, a metal slide should always be used if the camera is installed in a (weather-
proof) housing to ensure optimal heat dissipation.
4.5.2 Dome Camera DDF4910HDV-DN-IM
The dome camera DDF4910HDV-DN-IM (in-ceiling mount variant) is exclusively designed
for indoor installations.
An outdoor installation is prohibited and may result in malfunction, damage, data loss and
loss of warranty.
4.5.3 Dome Camera DDF4910HDV-DN-SM
The dome camera DDF4910HDV-DN-SM (surface mount variant) is designed for indoor
installations.
However, an outdoor installation may be permitted, but only in compliance with the follow-
ing instructions/recommendations:
• Use only IP67 (Ingress Protection 67) approved components and assemblies.
• Always use the delivered O-rings.
• Adhere the delivered adhesive-backed gasket to the bottom of the housing base.
• Always use the delivered cable gland (or equivalent) for the cable feedthrough.
• Protect the device from direct inuence of weather conditions (rainfall, direct sunlight, etc.).
• Always use a protected installation site (e.g. under a canopy).
• For wall mount installations, align the camera housing with the cable gland pointing
down whenever possible.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 15
5 Views and Connection Assignment
5.1 Box Camera
Ambient light sensor
CS lens mount
¼" tripod socket (on top and bottom side)
for camera mounting
DC auto iris lens
Locking screw
(focal length)
Locking screw
(focus)
Fig. 5-1
The lens shown in Fig. 5-1 is illustrative only and may differ from the actual product.
NOTICE
In order to obtain a correctly adjusted image, install the camera up side
down when using the ultra wide-angle lens F1.8 / 1.8 – 3 mm.
Alternatively, you can ip the image in both directions (horizontally and
vertically) by using the ip function of the camera.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 16
LAN / PoE
(RJ45 jack)
Power IN (12 V DC)
Weidmüller male connector
SL 3.50/02/90G
Audio OUT/ Micro IN
(3.5 mm phone jack)
Power LED
Video preview output
(BNC, CVBS)
DC auto iris interface
for iris control
LAN LED SDHC
card slot
Fig. 5-2
NOTICE
For a clean (interference-free) audio signal transmission, the Audio IN/OUT
Y-Cable Connector FGA-30 is required (optionally available).
LAN LED Status
Red LED (constant): Boot sequence is running (but no encoder is running yet);
Critical error during update (see below)
Green LED (constant): Encoding active (Red LED off)
Green LED (blinking): Streaming of encoded data active
The following LED states will occur during a successful update process:
Start of update process: All LEDs off
While update is running and during the critical phase: Red LED (blinking)
After successful update process until restart of system (5 – 10 sec.): Green LED
System restart: All LEDs off
Important:
If the update process has failed or the update was only partially executed, the Green LED
phase will NOT occur.
Instead, the Red LED is illuminated until the restart of the system (5 – 10 sec.).

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 17
5.2 Dome Cameras
5.2.1 In-ceiling Mount Variant (IM)
M6 screw eye bolt
Housing
Trim ring with bubble
3-axis mount
(pan / tilt / rotation)
PG16 cable gland
Lens
Ceiling clamp
Housing screw
(T20 Torx)
Black inner
dome cover
Removable foam ring
Ambient light sensor
Fig. 5-3
NOTICE
Always ensure that the lens and the ambient light sensor are not covered
by the black inner dome cover when assembling the camera enclosure.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 18
M4 locking screw
(ceiling clamp)
M4 locking screw
(ceiling clamp)
Thread for PG16 cable gland
DC auto iris interface
for iris control
Video preview output
(BNC, CVBS)
Locking screw
(focal length)
Locking screw
(focus)
Thread for
housing screw
Camera module
Thread for
housing screw
Thread for
housing screw
Flexible cable fastener Flexible cable fastener
Ambient light sensor
Removable foam ring
Fig. 5-4 Housing of in-ceiling mount variant (top view)

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 19
5.2.2 Surface Mount Variant (SM)
Thread for
PG16 cable gland
Mounting hole for
Ø 4 mm screw
Housing base
Housing with bubble
Lens
3-axis mount
(pan / tilt / rotation)
Housing screw
(T20 Torx)
Black inner
dome cover
Ambient light sensor
Removable foam ring
Fig. 5-5
NOTICE
Always ensure that the lens and the ambient light sensor are not covered
by the black inner dome cover when assembling the camera enclosure.

DF4910HD-DN | DDF4910HDV-DN-IM/-SM
www.dallmeier.com 20
Mounting hole for
Ø 4 mm screw
Mounting hole for
Ø 4 mm screw
Thread for PG16 cable gland
Camera module
Thread for
housing screw
Thread for
housing screw
Video preview output
(BNC, CVBS)
Locking screw
(focal length)
Locking screw
(focus)
Flexible cable fastener Flexible cable fastener
DC auto iris interface
for iris control
Mounting hole for
Ø 4 mm screw
Thread for
housing screw
Ambient light sensor
Removable foam ring
Fig. 5-6 Housing base of surface mount variant (top view)