dallmeier DDF4620HDV-DN User manual

004937 / 1.0.0 / 2014-03-20
SM
DDF4620HDV-DN
Commissioning
English

2
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
Informaon about Copyright, Trademarks, Design Patents
© 2014 Dallmeier electronic
The reproducon, distribuon and ulizaon of this document as well as the communicaon of
its contents to others without express authorizaon is prohibited. Oenders will be held liable
for the payment of damages.
All rights reserved in the event of the grant of a patent, ulity model or design.
We reserve the right to make technical modicaons.
The manufacturer accepts no liability for damage to property or pecuniary damages arising due
to minor defects of the product or documentaon, e.g. print or spelling errors, and for those not
caused by intenon or gross negligence of the manufacturer.
All trademarks idened by ® are registered trademarks of Dallmeier electronic.
All trademarks idened by *) are trademarks or registered trademarks of the following owners:
Adobe and Flash of Adobe Systems Incorporated headquartered in San José, California, USA;
AMD and AMD Athlon of Advanced Micro Devices, Inc. headquartered in Sunnyvale, California, USA;
Intel and Penum or Intel Penum of Intel Corporaon headquartered in Santa Clara, California, USA;
JavaScript of Oracle Corporaon (and/or its aliates) headquartered in Redwood Shores, California, USA;
Microso, AcveX, DirectX, Internet Explorer, Windows and Windows Vista of Microso Corporaon headquar-
tered in Redmond, Washington, USA
Third-party trademarks are named for informaon purposes only.
Dallmeier electronic respects the intellectual property of third pares and always aempts to ensure the com-
plete idencaon of third-party trademarks and indicaon of the respecve holder of rights.
In case that protected rights are not indicated separately, this circumstance is no reason to assume that the
respecve trademark is unprotected.

www.dallmeier.com 3
Commissioning DDF4620HDV-DN-SM
Table of Contents
1 Validity 4
2 Documents 4
Data Sheet 4
Commissioning 4
Conguraon 4
3 Typographical Convenons 5
4 Safety Instrucons 7
5 General Notes 10
Scope of Delivery 10
Transportaon and Packaging 10
Warranty 11
Approvals/Cercaons 11
Appropriate Use 11
6 Requirements 13
General 13
Operaon 13
7 Maintenance 15
8 Installaon and Commissioning 16
9 Pin Assignment 36
10 Connecon and Login 38
Connecon 40
Login 41
11 Technical Specicaons 42

4
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
1 Validity
This document applies to the following device:
• DDF4620HDV-DN-SM (surface mount variant)
Figures in this document may dier from the actual product.
2 Documents
Data Sheet
The document “Data sheet” contains detailed technical specicaons and features
of the device.
The target audience is trained system integrators.
Commissioning
The document “Commissioning” (this document) contains detailed descripons on
installaon, connecon and commissioning of the device as well as safety instruc-
ons and general notes.
The target audience is trained system integrators.
Conguraon
The document “Conguraon” contains detailed descripons on the conguraon
of the device.
The target audience is trained system integrators.

www.dallmeier.com 5
Commissioning DDF4620HDV-DN-SM
3 Typographical Convenons
This document may contain various warning words and symbols that indicate
potenal sources of danger:
DANGER
DANGER indicates a hazardous situaon which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a hazardous situaon which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situaon which, if not
avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address pracces not related to
physical injury.

6
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
For reasons of clarity and readability, various text formang elements and types
of emphasis are used in this documentaon:
Instrucons are indicated by arrows (➡):
➡Carry out instrucons one aer the other in the sequence described.
Expressions in bold/italics generally indicate a control element on the device
(switches or labels) or on its user interface (buons, menu items).
Paragraphs in italics provide informaon on basic principles, special features and
ecient procedure as well as general recommendaons.

www.dallmeier.com 7
Commissioning DDF4620HDV-DN-SM
4 Safety Instrucons
Only use the device if it is technically in proper working condion and for the
intended purpose while keeping safety and potenal dangers in mind.
• Qualied Personnel
The installaon, mounng, connecon, commissioning and conguraon of the
device may only be carried out by qualied personnel.
This also applies to the maintenance, tesng and repair, whereat the regula-
ons of the DIN VDE 0701 series of standards (repair, modicaon and inspec-
on of electrical appliances) must be followed.
• Regulaons
The use of video and audio surveillance systems is, in general, strictly regu-
lated. Inform yourself about the currently valid laws and regulaons regarding
data, worker and environmental protecon before using the device and ensure
compliance with them.
• System Components
Only use internal components that have been tested and approved by Dallmeier.
Inappropriate internal components may cause malfuncons, damages and data
loss and may result in the loss of warranty.
• Modicaons
Do not make any modicaons to the hardware or soware that have not been
tested and approved by Dallmeier.
Inappropriate modicaons may cause malfuncons, damages and data loss
and may result in the loss of warranty.

8
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
• Documentaon
Read the documents included in the delivery carefully and thoroughly.
Always observe the contained instrucons, notes and warnings.
The product documentaon contains several documents which are included in
the delivery in printed form and/or on a digital medium.
Store all documents in legible condion in a suitable locaon in order to pro-
vide for later consultaon.
• Condensaon Water
If the device is brought from a cold to a warm environment, resulng conden-
saon water may cause malfuncons and damages.
In this case, wait (up to 8 hours) unl the device has reached room tempera-
ture before commissioning.
• Earthing & Equipotenal Bonding
For the safety of persons (protecon against dangerous contact voltages) and
devices (protecon against over-voltages) and the immunity of informaon and
communicaon technology equipment to electromagnec interferences (EMI),
all protecve measures, which are specied by the currently valid DIN, VDE and
ISO standards and which provide for a standard-compliant earthing and a cor-
rect equipotenal bonding of electrical and electronic devices, are mandatory
and must be fullled by all means.
• Lightning Storms
To avoid damage to the device by electrical surge during lightning storms, un-
plug the device from the mains power supply (pull out the power plug).
This is also recommended, when the device has been unused for a long period
of me.

www.dallmeier.com 9
Commissioning DDF4620HDV-DN-SM
• Operang Condions
Unfavourable operang condions may shorten the life of the device and may
cause malfuncons, damages and data loss and may result in the loss of war-
ranty.
Observe the specicaons given in the technical data, the operang condion
requirements and the maintenance instrucons.
• Foreign Bodies
If objects or liquids get into the device, immediately disconnect it from the
power supply (pull out the power plug).
Contact the sales partner responsible for your area.
• Burnt Smell
If you noce burnt smell or a formaon of smoke coming from the device, im-
mediately disconnect it from the power supply (pull out the power plug).
Contact the sales partner responsible for your area.
• Opening
The device may only be opened by qualied personnel for commissioning,
inspecon, maintenance and repair.
• Disposal
Do not dispose waste electrical and electronic equipment into the household
trash.
Disconnect the device from the power supply.
Remove all connected devices.
Return the device to your respecve sales partner.

10
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
5 General Notes
Scope of Delivery
Included in the standard scope of delivery is:
1× Documentaon “Conguraon” (published on DVD-ROM)
1× Documentaon “Commissioning” (published in print and on DVD-ROM)
1× Drilling template (published in print and on DVD-ROM)
In addion, all screws and dowels necessary for a proper installaon are included.
The scope of delivery may dier depending on the ordered equipment, device vari-
ant or country of desnaon.
The funconal range of the device depends on the ordered equipment or device
variant and may dier from this document’s content.
Certain funcons and features may require the purchase of an addional license.
Transportaon and Packaging
Store the original packaging for later transportaon.
Dallmeier is not responsible for any damage resulng from unprofessional/im-
proper transportaon.
The device should only be shipped in the original packaging.
If the original packaging is no longer available, ensure that the used packaging suf-
ciently protects the device against damage, moisture, heat and cold.

www.dallmeier.com 11
Commissioning DDF4620HDV-DN-SM
Warranty
The terms and condions valid at me the contract was signed shall apply.
Approvals/Cercaons
The following approvals/cercaons were valid for the device at the me of this
document’s compilaon:
• CE, FCC, ACA, UVV “Kassen” (DGUV Test), UL, DIN 50130-4 compliant
Visit www.dallmeier.com for possible updates.
Appropriate Use
The DDF4620HDV-DN-SM (surface mount variant) is a hybrid HD network camera
built into a vandal-resistant (IK10) dome enclosure.
In addion to HD video over IP (Ethernet), the hybrid camera provides for a simul-
taneous analog SD (PAL/NTSC) video output via BNC (CVBS).
The camera is designed for indoor installaons on ceilings and walls and can be
powered via PoE (Power over Ethernet, Class 0, IEEE 802.3af) or supplied with
12 V DC (separate power supply unit required).

12
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
NOTICE
The DDF4620HDV-DN-SM is designed for indoor
installaons. However, an outdoor installaon may be
permied, but only in compliance with the following
instrucons/recommendaons:
• Only use IP67 (Ingress Protecon 67) approved
components and assemblies.
• Always use the delivered O-rings.
• Adhere the delivered adhesive-backed gasket to the
boom of the housing base.
• Always use the delivered cable gland (or equivalent)
for the cable feedthrough.
• Protect the device from direct inuence of weather
condions (rainfall, direct sunlight, etc.).
• Always use a protected installaon site (e.g. under
a canopy).
• For wall-mount installaons, align the camera hous-
ing with the cable gland poinng down whenever
possible.

www.dallmeier.com 13
Commissioning DDF4620HDV-DN-SM
6 Requirements
General
Unfavourable local condions may shorten the lifeme of the product and may
cause malfuncons or damages.
Do not install/operate the device in places
• with a large amount of dust and dirt,
• with steam or oil vapours (e.g. kitchen),
• with direct sunlight,
• with strong heat emissions (e.g. radiator),
• with improper ambient temperatures,
• near sources with strong radiaon (e.g. radio transmiers, magnec elds),
• with corrosive surroundings (e.g. gases, salt water),
• with insucient air venlaon (e.g. closed cabinet).
Operaon
Observe the following notes for the operaon of the device:
• The device can be powered via PoE (Power over Ethernet, Class 0, IEEE 802.3af)
or supplied with a separate 12 V DC power supply unit.
However, always beware not to use both power sources simultaneously.
• Always ensure the correct polarity when using a separate 12 V DC power supply
unit.

14
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
• Always disconnect the separate 12 V DC power supply unit from the mains
socket (pull out the power plug) before connecng or disconnecng the device.
• In order to comply with UL’s requirements, always use a UL-cered, Limited
Power Source (LPS) Class 2 power supply unit when operang the device with a
separate 12 V DC power supply unit.
• When using a separate 12 V DC power supply unit, interference caused by a
ground loop may occur in the analog video signal. In this case, use a video
signal transformer (balun) for galvanic (ground) isolaon between the signal
source (camera) and the RG-59 cable.
• If the device or the cables connected to the device are located near sources
with strong radiaon, the video image may be distorted.
• The device is equipped with automac gain control (AGC). In low light condi-
ons the image may be altered (e.g. noise). However, this is not a camera
malfuncon.
• The quality of the video image depends on the lighng condions and the used
monitor.
• The accuracy of the automac white balance (AWB) algorithm depends on the
used lighng. Mixed light (consisng of arcial light and daylight) may cause
colour distorons (inaccurate colour reproducon).
• Poor lighng can lead to an incorrect white balance.

www.dallmeier.com 15
Commissioning DDF4620HDV-DN-SM
7 Maintenance
The device may only be opened by qualied personnel for commissioning, inspec-
on, maintenance and repair.
Cleaning
If it is necessary to clean the device, observe the following notes:
NOTICE
Damage to the surface of the device
➡Clean the housing (outside) with a so, dry and
anstac cloth.
• Do not use detergents.
➡Clean the plasc bubble with water and some
dishwashing agent using a so, non-linng cloth or
sponge.
• Do not rub the plasc bubble with a dry cloth.
• Do not use common glass cleaners.
• Avoid excessive rubbing.
• Dry gently with a clean dry cloth to avoid
scratching the surface.

16
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
8 Installaon and Commissioning
The installaon and commissioning of the device may only be carried out by quali-
ed personnel.
WARNING
Falling device/objects or collapsing ceiling
Danger of death or serious injury to the head
➡Observe the manufacturer’s instrucons about the
maximum adequate carrying capacity of the sup-
porng structure.
➡Use screws suitable for the ceiling/wall material.
➡Use the correct type of anchor for your ceiling/wall
type:
• Plasc screw anchors for solid wall material
(concrete/brick)
• Toggle bolt style anchors for drywall / hollow
wall type (plaster)
Electric shock hazard
Danger of death or serious injury
➡Always disconnect the PoE switch or the separate
power supply unit from the mains socket (pull out
the power plug) before connecng or disconnecng
the device.

www.dallmeier.com 17
Commissioning DDF4620HDV-DN-SM
NOTICE
Damage to the device resulng from improper power
supply
The device can be powered via Power over Ethernet
(PoE, Class 0, IEEE 802.3af) or supplied with a separate
12 V DC power supply unit.
However, always beware not to use both power
sources simultaneously.
In order to comply with UL’s requirements, always
use a UL-cered, Limited Power Source (LPS) Class 2
power supply unit when operang the device with a
separate 12 V DC power supply unit.
You need:
• Torx screwdriver (T20)
• Marking tool (e.g. awl)
• Electric drill
• 3× dowels
• 3× mounng screws (Ø 4 mm)
• Screwdriver (for mounng screws)
• PG16 cable gland

18
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
❶
ⓐTorx screwdriver (T20)
ⓐ

www.dallmeier.com 19
Commissioning DDF4620HDV-DN-SM
➡Loosen the torx screws of the housing.
ⓐT20 torx screw (3×)
ⓐ

20
www.dallmeier.com
DDF4620HDV-DN-SM Commissioning
❷
➡Remove the housing/bubble.