Dancing Wings Hobby VX-08 User manual

Fokker-E INSTRUCTION MANUAL
F-1
F-1
F-15 F-14
F-17
F-16
F-2
F-3
F-13
F-12
F-11 F-9
F-10
F-18
F-5
F-8
F-7
F-7
F-6
F-18-1
F-4
F-27
F-28
F-19 F-19
W-7
W-1
W-1
W-2
W-2
W-4
W-6
W-5x2
W-3
W-8
W-8
W-9 W-9
F-25x2
F-26
Carbon rod
F-29
F-26
1.Assemble the Fuselage
1.2Assemble the Cowling
2.Assemble the Wing
4.Assemble the Propeller
3.Assemble the Landing gear and wheels
Pls take down the parts from the board by knife,and
assemble them as per the procedures as below,we
suggest you to shape with 502 glue,and firm with
white latex.
F-24
F-20
Tools Needed
Wingspan:410mm
Length:308mm
Carbon rod
Heat-shrinkable Tube
Material:
1. Basswood
2. Balsawood
3. Paulownia
4. Fiberglass and others
(X08)
Polish the F-19 with
suitable shape and then
paste onto the fuselage.
Take down the
F-24,polish it
with wheel
shape,and paint
in black.
Paste together the F-26 and
F-29,polish them into
semicircle,paint in black and paste
onto the carbon rod.

Assemble the machine gun,paint it in black,
insert and paste onto the head of the fuselage.
F-21
F-22 F-23
Carbon tube
Carbon rod
Guide button
a. Sew through the hole on the bracket
b. Put the wiring together
through the guide button
c. Pull the steel wire of the guide
button and drag the wiring into the
guide button.
tie a knot
Pull tight and
cut off the spare
d. Pull one wiring to the hole on the wing and tie a
knot,and pull the other wiring tight and keep suitable
length,finally cut off the spare.
6.Display the Wiring
5.Assemble the Machine Gun
Fokker-E INSTRUCTION MANUAL
Assembly Finished
Display the Static Model
警告:
！内含小部件，不
适合三岁及以下
儿童使用。
WARNING:
！CHOKING HAZARD-Small
parts.Not for children
under 3 years.
(X08)
Heat-shrinkable Tube