Dancover ProShed User manual

5x8m Garage Installation Instruction
Metal Garage
Owner's Manual
Instructions for Assembly
Size 5x8m

SAFETY AND HAZARD INSTRUCTIONS
CAUTION
:
Read the following safety warnings and all instructions in their entirety prior to installation.
WARNING:
Metal parts may get hot when exposed to high heat or direct sunlight. Avoid contact with skin and wear protective gloves
and clothing to prevent the possibility of burns.
WARNING:
Metal conducts electricity and electrical shock hazards exist since the structure is made of metal. During installation or storage,
keep the structure and all components away from electrical sources. Make sure that your selected location is away from power lines,
underground cables, and any other source of electrical power. Serious injury or even death may occur if contact is made with electrical current.
WARNING:
If the structure is moved once it has been installed, be certain to inspect all components and conditions and follow each and every step of
these instructions to make certain that the structure is securely anchored, properly installed, and aligned. Failure to follow these steps
could lead to collapse of the structure and may result in serious risk of injury.
WARNING:
In the event that your structure is enclosed, be sure to provide proper and adequate egress and ingress.
Hazardous, poisonous or noxious substances should not be stored in the structure and the following all warnings
and instructions of the manufacturer of the substance. Also, proper ingress and egress should be provided to prevent persons
or children from becoming trapped inside the structure.
WARNING:
The product metal panels are selected to cover all or a portion of your structure, be careful of the sharp edges which may cause cuts
or lacerations. Wear protective work gloves and suitable clothing for protection and always take care when handling metal parts.
WARNING:
Always wear safety glasses or goggles when installing self-drilling screws.

8

PART LIST FOR 5X8m GARAGE
Part No. Diagram
Length(m)
QTY(pcs) Part No. Diagram QTY(pcs)
FB01 2.8 4 UC 69
CC 10
FB02 2.4 2 LC 23
FB03 1.78 1 VC 3
FB03-1 1.78 1
IC 3
FB04 3 1 OC 3
FB04-1 3 1
RB 5
FP 3 7 S0 6
FP-1 3 1 S1
FR 2.44 8 S2
S3
FP01 2.7 2
FP01-1 2.7 1 DC 2
RP 2.6 24
DA 1
WP 2.6 6
WB 2.24 2 DG 2
WB-1 0.9 2
DP 1
RP01 2.66 26 RP01
DF 1
WP01 3.04 26
WP01 WP02-3 1
WP01-1 WP01-3 3.04 1
WP01-2 WP01-4 2.94 1
WP01-3L WP01-1L 2.84 1 WP01-1 WP02-3L 1
WP01-4L WP01-2L 2.74 1

5x8m Garage
Frame Sketch
Width:5m
Length:8m
On center frame spacing:2.6m
Wall Height:3m
height:3.5m
FB01
FB02
FB03
FB04
FP
FR
RP
WP
WB
Front
Back
Left
Right
Ridge

Sep#1.Base Installation
Measure and install base as following.
Make sure diagonal dimentsions should be equal.
Note:Don't fix the anchor bolt now.
Diagonal dimensions
should be equal
5m
8m
FB01
FB01
FB01
FB01
FB02
FB02
FB03
FB03-1
FB04
FB04-1
Front
Right
Back
Left
S1
S1

Sep#2.Post installation
Assemble 11 pcs posts and plug in pins.(as
following)
FP-1
FP
FP
FP
FP01
FP
FP
FP
FP
FP01
FP01-1
S1
Front
Right
Back
Left
S2
S1
S1

Sep#3.Roof frame installation
Make 2pcs roof frame as a whole one 4.88m.
Lift and assemble roof frame between 2 posts.(as following)
FR
FR
FR
FR
S1
S1
S1
Front
Right
Back
Left

Sep#4.Roof and side wall purlin installation
Assemble roof purlin between 2 roof frames.
Then assemble wall purlin between 2
Note:
Adjust the frame.
Now fix the 6pcs S0.
WP
WP
WB
RP
RP
WB
WB-1
WB-1
S0
S1
S2
Front
Right
Left
Back
S2
S2
S2
S2
UC
UC
posts.

Sep#5.Roof panel installation
IC
S3
S2
S2
S2
S2
S2
S2
OC
RP01
RP01
RP01
RP01
RP01
RP01
Front
Right
Front
Right
Front
Right
Front
Left
1
2
3
4
1
2

S3
S3
CC
CC
Right
Front
Left
Back
CC
CC
CC
CC

Sep#6.Wall panel installation
Back
Left
WP01-1L
WP01-2L
WP01-3L
WP01-4L
WP01-1
WP01-2
WP01-3
WP01-4
S2
1
1
2
3
3
Fig.2
Fig.3
Fig.1
Left
Back
RP01
RP01
WP01
RP01
Back
Left
Front
Right
VC
VC
VC
LC
S3
S3
S3
S3
S2

Sep#7.Roller door installation
Front
DG
DC
DA
S3
DP
S3
DF
Front
Front
FP-1
DC
S3
S3
FP-1
DG
S3
DA
DP
DP
DG
FP-1
S3

Sep#8.Front panel installation
WP02-1L
WP02-2
WP02-1
WP02-2L
WP02-4L
WP02-3L
WP02-4
WP02-3
Front
Front
Front
3
1
2
1
2
Fig.3
Fig.1
Fig.2
VC
LC
LC
LC
S3
S2

Sep#9.Panel door installation
S3
Front
Dia.16mm
Dia.10mm
Dia.16mm
S3
S3