Danfoss FCM305 56 User manual

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
Table of Contents
Chapter 1 SafetyChapter 1 Safety
Chapter 1 SafetyChapter 1 Safety
Chapter 1 Safety ....................................................................................................................................................................
....................................................................................................................................................................
..................................................................................page 1-1
■Warnings...............................................page 1-2
■Safety Precautions ................................page 1-3
■Warning Against Unintended Start .......page 1-3
Chapter 2Chapter 2
Chapter 2Chapter 2
Chapter 2 General TGeneral T
General TGeneral T
General Technical Dataechnical Data
echnical Dataechnical Data
echnical Data........................................................................................................
........................................................................................................
....................................................page 2-1
■Specifications ........................................page 2-2
■ General Technical Data.........................page 2-2
Chapter 3Chapter 3
Chapter 3Chapter 3
Chapter 3 DimensionsDimensions
DimensionsDimensions
Dimensions..............................................................................................................................................
..............................................................................................................................................
.......................................................................page 3-1
■Product Dimensions..............................page 3-2
Chapter 4Chapter 4
Chapter 4Chapter 4
Chapter 4 OrderingOrdering
OrderingOrdering
Ordering....................................................................................................................................................................
....................................................................................................................................................................
.................................................................................. page 4-1
■Ordering information..............................page 4-2
■ Ordering form ........................................page 4-7
Chapter 5Chapter 5
Chapter 5Chapter 5
Chapter 5 Product ConceptProduct Concept
Product ConceptProduct Concept
Product Concept............................................................................................................................
............................................................................................................................
..............................................................page 5-1
■Integrating an AFD and motor ..............page 5-2
Chapter 6Chapter 6
Chapter 6Chapter 6
Chapter 6 InstallationInstallation
InstallationInstallation
Installation..................................................................................................................................................
..................................................................................................................................................
.........................................................................page 6-1
■Mechanical installation..........................page 6-2
■Motor information..................................page 6-4
■Terminal Scpecifications........................page 6-6
■Electrical Installation..............................page 6-8
Chapter 7Chapter 7
Chapter 7Chapter 7
Chapter 7 OperationOperation
OperationOperation
Operation ....................................................................................................................................................
....................................................................................................................................................
..........................................................................page 7-1
■Start-up.................................................page 7-2
■Control Options .....................................page 7-2
■Local Control Panel...............................page 7-5
Chapter 8Chapter 8
Chapter 8Chapter 8
Chapter 8 ParameterGroup 0: Operation &DisplayParameterGroup 0: Operation &Display
ParameterGroup 0: Operation &DisplayParameterGroup 0: Operation &Display
ParameterGroup 0: Operation &Display..............................................................
..............................................................
............................... page 8-1
■Parameters 001-019.............................page 8-2
Chapter 9Chapter 9
Chapter 9Chapter 9
Chapter 9 Parameter Group 1: Load & MotorParameter Group 1: Load & Motor
Parameter Group 1: Load & MotorParameter Group 1: Load & Motor
Parameter Group 1: Load & Motor ....................................................................
....................................................................
.................................. page 9-1
InstructionManual
MG.03.B6.22 Document Version 2.0
Software version 2.1x
The software version number
is displayed in parameter 624

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfosstrademark
■Parameters 100-139.............................page 9-2
Chapter 10Chapter 10
Chapter 10Chapter 10
Chapter 10 ParameterGroup 2: References& LimitsParameterGroup 2: References& Limits
ParameterGroup 2: References& LimitsParameterGroup 2: References& Limits
Parameter Group 2:References & Limits ..............................................................
..............................................................
............................... page 10-1
■Parameters 200-231.............................page 10-2
Chapter 11Chapter 11
Chapter 11Chapter 11
Chapter 11 Parameter Group 3: Inputs & OutputsParameter Group 3: Inputs & Outputs
Parameter Group 3: Inputs & OutputsParameter Group 3: Inputs & Outputs
Parameter Group 3: Inputs & Outputs ............................................................
............................................................
..............................page 11-1
■Parameters 317-340.............................page 11-2
Chapter 12Chapter 12
Chapter 12Chapter 12
Chapter 12 Parameter Group 4: Special FunctionsParameter Group 4: Special Functions
Parameter Group 4: Special FunctionsParameter Group 4: Special Functions
Parameter Group 4: Special Functions ........................................................
........................................................
............................page 12-1
■Parameters 400-446.............................page 12-2
Chapter 13Chapter 13
Chapter 13Chapter 13
Chapter 13 ParameterGroup5:SerialCommunicationParameterGroup5:SerialCommunication
ParameterGroup5:SerialCommunicationParameterGroup5:SerialCommunication
ParameterGroup5:SerialCommunication ............................................................
............................................................
..............................page 13-1
■Parameters 500-543.............................page 13-2
Chapter 14Chapter 14
Chapter 14Chapter 14
Chapter 14 ParameterGrParameterGr
ParameterGrParameterGr
ParameterGroup 6:Toup6: T
oup6: Toup6:T
oup6: TechnicalFunctionsechnicalFunctions
echnicalFunctionsechnical Functions
echnicalFunctions..............................................................
..............................................................
...............................page 14-1
■Parameters 600-635.............................page 14-2
Chapter 15Chapter 15
Chapter 15Chapter 15
Chapter 15 Serial CommunicationSerial Communication
Serial CommunicationSerial Communication
Serial Communication............................................................................................................
............................................................................................................
......................................................page 15-1
■Danfoss PC Software............................page 15-2
■Serial bus ..............................................page 15-3
■Telegram Communication.....................page 15-3
■Telegram Build-up .................................page 15-3
■Data Bytes............................................page 15-4
Chapter 16Chapter 16
Chapter 16Chapter 16
Chapter 16 MessagesMessages
MessagesMessages
Messages ..................................................................................................................................................
..................................................................................................................................................
.........................................................................page 16-1
■List of Warnings and Alarms .................page 16-2
■What if the Motor Does Not Start?.......page 16-2
■Warnings...............................................page 16-3
■Warnings Words 1+2 and Alarm Word .page 16-5
Chapter 17Chapter 17
Chapter 17Chapter 17
Chapter 17 CE / EMCCE / EMC
CE / EMCCE / EMC
CE / EMC ..................................................................................................................................................
..................................................................................................................................................
.........................................................................page 17-1
Table of Contents

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
■CE Labeling...........................................page 17-2
■The Machinery Directive (89/392/EEC).page 17-2
■The Low-Voltage Directive /73/23/EEC)page 17-2
■The EMC Directive (89/336/EEC) .........page 17-2
■CompliancewithEMCDirective(89/336/EEC) page 17-2
■What is Covered? .................................page 17-2
■Danfoss VLT®DriveMotor & CE Labeling page 17-3
■Galvanic Isolation (PELV) ......................page 17-3
■Ground Leakage Current .....................page 17-4
■Acoustic Noise ......................................page 17-4
■Balance.................................................page 17-4
■Extreme Running Conditions ................page 17-4
■EMC Standards ....................................page 17-5
■Harsh Environments..............................page 17-6
Chapter 18Chapter 18
Chapter 18Chapter 18
Chapter 18 Special ConditionsSpecial Conditions
Special ConditionsSpecial Conditions
Special Conditions ....................................................................................................................
....................................................................................................................
..........................................................page 18-1
■Derating ................................................page 18-2
■Derating for Ambient Temperature and
for running at low speed .......................page 18-2
■Derating for Air Pressure.......................page 18-2
■ Derating for High Switching Frequency.page 18-3
■Vibration and Shock...............................page 18-3
■Air Humidity ...........................................page 18-3
■Efficiency...............................................page 18-3
■Harmonics.............................................page 18-4
■Power Factor ........................................page 18-4
Chapter 19Chapter 19
Chapter 19Chapter 19
Chapter 19 ParametersParameters
ParametersParameters
Parameters ..............................................................................................................................................
..............................................................................................................................................
.......................................................................page 19-1
■Factory Parameter Settings..................page 19-2
Chapter 20Chapter 20
Chapter 20Chapter 20
Chapter 20 IndexIndex
IndexIndex
Index..............................................................................................................................................................
..............................................................................................................................................................
............................................................................... ..page 20-1
■Index .....................................................page 20-2
Table of Contents

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
Chapter 1Chapter 1
Chapter 1Chapter 1
Chapter 1 ■Warnings...............................................page 1-2
■Safety Precautions ................................page 1-3
■Warning Against Unintended Start .......page 1-3
Safety
1-1

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfoss trademark
Safety
WARNINGWARNING
WARNINGWARNING
WARNING
WARNINGWARNING
WARNINGWARNING
WARNING
CAUTIONCAUTION
CAUTIONCAUTION
CAUTION
The FCM 300 Series unit contains dangerous voltages when connected to line voltage.
After disconnection from the line, wait at least 4 minutes before touching any electrical
components. Also make sure that other voltage inputs have been disconnected. Only a
competent electrician should carry out the electrical installation. Improper installation of
the FCM 300 Series unit may cause equipment failure, serious injury or death. Follow this
manual and the National Electrical Codes (NEC®) and local safety codes.
Electrostatic Precaution: Electrostatic discharge (ESD). Many electronic components are
sensitive to static electricity. Voltages so low that they can not be felt, seen or heard, can
reduce the life, affect performance, or completely destroy sensitive electronic.
When performing service, proper ESD equipment should be used to prevent possible
damage from occurring.
It is the reponsibility of the user or the person installing the FCM 300 to provide proper
grounding and branch circuit protection according to the National Electrical Code (NEC®)
and local codes.
Motor overload protection is internal to the unit.
1-2

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
Safety
SafetyPrecautions
1. The FCM 300 unit must be disconnected from
the AC line if repair work is to be carried out.
After the AC supply has been disconnected, be
sure the necessary time (4 min.) has passed
before removing line terminal wires.
2. The "Stop/Reset" key on the optional local
control pad or local operating panel of the FCM
300 unit DOES NOT disconnect the equipment
from the AC line and is NOT to be used as a
safety switch.
3. The installer must supply correct protective
grounding of the equipment and the user must
be protected against supply voltage in
accordance with the National Electrical Code
and local codes. Class 20 motor overload pro-
tection is provided internally.
4. The ground leakage currents are higher than 3.5
mA.
5. Use lifting points, if provided. Lift FCM 300 units
vertically only. Lifting points are provided to
support the weight of the FCM 300 only - do not
use lifting points when additional equipment is
attached.
6. Before installation, check unit for fan cover
damage, foot/mounting damage, shaft damage
and loose fasteners. Check nameplate data on
motor.
7. FCM 300 types 311-375 (over 44 lb/20 kg)
should be positioned by lifting machines only -
for your safety, do not attempt hand lifting. Refer
to "Handling the FCM 300" on page 6-5 for
actual weights.
8. Installation must be correctly fused and isolated
per CE directives.
Warning Against Unintended Start
1. The unit can be brought to a stop by means of
digital commands, bus commands, references or
a local stop, while the FCM 300 unit is
connected to the AC line.
These stop functions are NOT sufficient to
ensure that no unintended start occurs and
should NOT be used for personal safety
considerations.
2. While parameters are being changed, the motor
may start.
3. A FCM 300 unit that has been stopped may start
if faults occur int the electronics of the unit, or if a
temporary overload occurs or if there is an
interruption in the AC line supply.
1-3

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfoss trademark

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
Chapter 2Chapter 2
Chapter 2Chapter 2
Chapter 2 ■Specifications ........................................page 2-2
■ General Technical Data.........................page 2-2
General Technical Data
2-1

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfoss trademark
General Technical Data
■FCM 305-375 for 3 phases, 380-480 V
FCMFCM
FCMFCM
FCM 305305
305305
305 307307
307307
307 311311
311311
311 315315
315315
315 322322
322322
322 330330
330330
330 340340
340340
340 355355
355355
355 375375
375375
375
Motor output
[HP] 0.75 1.0 1.5 2.0 3.0 4.0 5.0 7.5 10.0
[kW] 0.55 0.75 1.1 1.5 2.2 3.0 4.0 5.5 7.5
Motor torque
2 pole [Nm] 1.8 2.4 3.5 4.8 7.0 9.5 12.6 17.5 24.0
4 pole [Nm] 3.5 4.8 7.0 9.6 14.0 19.1 25.4 35.0 48.0
Frame
size [mm] 56 56 143 145 182 182 184 213 215
Weight [kg] 11 13 17 20 26 28 37 56 61
Input current
380 V
2 p 1.4 1.6 2.2 2.8 4.1 5.3 7.0 9.3 13.0
4p 1.4 1.7 2.5 3.3 4.7 6.4 7.9 11.1 15.3
480 V
2 p 1.2 1.3 1.8 2.3 3.3 4.2 5.6 7.4 10.2
4 p 1.1 1.4 2.0 2.6 3.7 5.1 6.4 8.8 11.9
Power
terminals
[AWG] 10 10 10 10 10 10 10 6 6
[mm2] 44444441010
Gland sizes 3XPG16* 3XPG16* 3XPG16* 3XPG16* 3XPG16* 3XPG16* 3XPG16* 1XPG21/ 1XPG21/
3XPG16* 3XPG16*
Max. prefuse
UL1) [A] 10 10 10 10 10 15 15 25 25
IEC1) [A] 25 25 25 25 25 25 25 25 25
* PG to NPT adapters can be ordered separately. See page 4-5.
1) Type gG prefuses must be used. If you wish to observe UL/cUL, KTS-R 500 V pre-fuses or equivalent must
be used. The fuses must provide protection in a circuit capable of supplying max. 100,000 amps rms
(symmetrical), 500 V maximum.
AC line supply, TT, TN and IT* (L1, L2, L3):
- Supply voltage 380-480 V units ......................................................... 3 x 380/400/415/440/460/480 V ±10%
- Supply frequency ...............................................................................................................................50/60 Hz
- Max. imbalance of supply voltage....................................................................... ±2% of rated supply voltage
- Power factor / cos ϕ ....................................................................................................... max. 0.9/1.0 at rated load
- Switching on supply input L1, L2, L3 ............................................................................. approx. 1 time/2 min
See chapter 18, "Special conditions".
*) Not valid for RFI class 1B units
Torque characteristics:
- Starting torque/overload torque ..............................................................................................160 % for 1 min
- Continuous torque .................................................................................................................... see page 18-2
■General technical data
2-2

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
General Technical Data
Control card, analog inputs:
- No. of programmable analog voltage inputs ................................................................................................. 1
- Terminal nos.......................................................................................................................................... X101-2
- Voltage level ..................................................................................................................0 - 10 V DC (scalable)
- Input resistance, Ri................................................................................................................... approx. 10 kΩ
- No. of programmable analog current inputs ...................................................................................................1
- Terminal no. .......................................................................................................................................... X101-1
- Current range................................................................................................................... 0 - 20 mA (scalable)
- Input resistance, Ri................................................................................................................... approx. 300 Ω
- Resolution ..................................................................................................................................................9bit
- Accuracy on input...................................................................................................Max. error 1% of full scale
- Scanning time ................................................................................................................................... 20 msec.
Control card, digital/pulse and analog outputs:
- No. of programmable digital and analog outputs ......................................................................................... 1
- Terminal nos.......................................................................................................................................... X101-9
- Voltage level at digital output/load .................................................................................... 0 - 24 V DC/25 mA
- Current at analog output ................................................................................................................. 0 - 20 mA
- Maximum load to frame (terminal 8) at analog output............................................................... RLOAD ≤500 Ω
- Accuracy of analog output ................................................................................ Max. error: 1.5% of full scale
- Resolution on analog output......................................................................................................................8 bit
Control card, RS 485 serial communication:
- Terminal nos.................................................................................................................................... X100-1, -2
Control characteristics (adjustable frequency drive):
- Frequency range..............................................................................................................................0 - 132 Hz
- Resolution on output frequency............................................................................................................. 0.1 %
- System response time ............................................................................................................ Max. 40 msec.
Control card, digital/pulse inputs:
- Number of programmable digital inputs ..........................................................................................................4
- Terminal nos.........................................................................................................................X101-2, -3, -4, -5
- Voltage level ................................................................................................... 0-24 V DC (PNP positive logics)
- Voltage level, logic ´0´ ........................................................................................................................ < 5 V DC
- Voltage level, logic ´1´ ...................................................................................................................... > 10 V DC
- Maximum voltage on input .................................................................................................................28 V DC
- Input resistance, Ri..................................................................................................................... approx. 2 kΩ
- Scanning time ................................................................................................................................... 20 msec
Control card, pulse input:
- No. of programmable pulse inputs................................................................................................................ 1
- Terminal nos.......................................................................................................................................... X101-3
- Max. frequency on terminal 3, open collector/push pull 24 V ................................................... 8kHz/70 kHz
- Resolution ................................................................................................................................................10 bit
- Accuracy (0.1-1 kHz), terminal 3...................................................................... Max. error: 0.5% of full scale
- Accuracy (1-12 kHz), terminal 3........................................................................ Max. error: 0.1% of full scale
2-3

Externals:
- Enclosure ............................................................................................................................. IP 55 (IP56, IP66)
- Vibration test ........................................................................................................ (IEC 68 see page 18-3) 1 g
- Max. relative humidity ................................................... 93 % +2 %, -3 % (IEC 68-2-3) for storage/transport
- Ambient temperature .......................................................................Max. 40°C (24-hour average max. 35°C)
Derating for high ambient temperature, see chapter 18.
- Min. ambient temperature in full operation .................................................................................................0°C
- Min. ambient temperature at reduced performance.............................................................................. -10°C
- Temperature during storage/transport.....................................................................................-25 - +65/70°C
- Max. altitude above sea level ................................................................................................3,300 ft./1000 m
Derating for air pressure, see chapter 18.
- EMC standards applied, Emission...................................EN 50081-1/2, EN 61800-3, EN 55011, EN 55014
Immunity ................... EN 50082-2, EN 61000-4-2, IEC 1000-4-3, EN 61000-4-4
EN 61000-4-5, ENV 50140, ENV 50141
- Safety standards applied, ............................................................................ EN 60146, EN 50178, EN 60204
UL508
Protection:
••
••
•Thermal overload protection of motor and electronics.
••
••
•Monitoring of the intermediate circuit voltage ensures that the inverter cuts out if the intermediate circuit
voltage gets too high or too low.
••
••
•If an AC line phase is missing, the inverter will cut out when a load is placed on the motor.
••
••
•Overcurrent, and voltage transients protection.
2-4 MG.03.B6.22 - VLT is a registered Danfoss trademark
General Technical Data

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
Chapter 3Chapter 3
Chapter 3Chapter 3
Chapter 3 ■DimensionsDimensions
DimensionsDimensions
Dimensions....................................................................................
....................................................................................
..........................................page 3-2
Dimensions
3-1

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfoss trademark
Dimensions
FCMFCM
FCMFCM
FCM 305305
305305
305 307307
307307
307 311311
311311
311 315315
315315
315 322322
322322
322 330330
330330
330 340340
340340
340 355355
355355
355 375375
375375
375
Frame sizeFrame size
Frame sizeFrame size
Frame size 5656
5656
56 5656
5656
56 143T143T
143T143T
143T 145T145T
145T145T
145T 182¨T182¨T
182¨T182¨T
182¨T 182T182T
182T182T
182T 184T184T
184T184T
184T 213T213T
213T213T
213T 215T215T
215T215T
215T
HPHP
HPHP
HP 0.750.75
0.750.75
0.75 1.01.0
1.01.0
1.0 1.51.5
1.51.5
1.5 2.02.0
2.02.0
2.0 3.03.0
3.03.0
3.0 4.04.0
4.04.0
4.0 5.55.5
5.55.5
5.5 7.57.5
7.57.5
7.5 10.010.0
10.010.0
10.0
UØ [in] 0.625 0.625 0.875 0.875 1.125 1.125 1.125 1.375 1.375
N-W [in] 1.875 1.875 2.25 2.25 2.75 2.75 2.75 3.25 5.575
ES [in] 1.375 1.375 1.406 1.406 1.75 1.75 1.75 2.375 2.375
S [in] 0.188 0.188 0.188 0.188 0.25 0.25 0.25 0.313 0.313
R [in] 0.517 0.517 0.771 0.771 0.986 0.986 0.986 1.201 1.201
Foot mounting - B3Foot mounting - B3
Foot mounting - B3Foot mounting - B3
Foot mounting - B3
GeneralGeneral
GeneralGeneral
General
FCMFCM
FCMFCM
FCM 305305
305305
305 307307
307307
307 311311
311311
311 315315
315315
315 322322
322322
322 330330
330330
330 340340
340340
340 355355
355355
355 375375
375375
375
Frame sizeFrame size
Frame sizeFrame size
Frame size 5656
5656
56 5656
5656
56 143T143T
143T143T
143T 145T145T
145T145T
145T NANA
NANA
NA NANA
NANA
NA 184T184T
184T184T
184T 213T213T
213T213T
213T 215T215T
215T215T
215T
HPHP
HPHP
HP 0.750.75
0.750.75
0.75 1.01.0
1.01.0
1.0 1.51.5
1.51.5
1.5 2.02.0
2.02.0
2.0 --
--
---
--
-5.55.5
5.55.5
5.5 7.57.5
7.57.5
7.5 10.010.0
10.010.0
10.0
2E [in] 4.875 4.875 5.5 5.5 - - 7.5 8.5 8.5
BA [in] 2.75 2.75 2.25 2.25 - - 2.75 3.5 3.5
D [in] 3.5 3.5 3.5 3.5 - - 4.5 5.25 5.25
HØ [in] 0.344 0.344 0.344 0.344 - - 0.5 0.5 0.5
2F [in] 3 3 4 5 - - 4 5.5 7
C [in] 12.25 12.25 13 13 - - 15.78 17.781 17.781
CBW [in] 8.11 8.11 9.06 9.06 - - 11.26 13.38 13.38
CBH [in] 5.55 5.55 6.22 6.22 - - 7.76 9.25 9.25
HD [in] 8,98 8,98 9,31 9,31 11,50 13,14 13,14
Shaft Drive EndShaft Drive End
Shaft Drive EndShaft Drive End
Shaft Drive End
■Dimensions
3-2

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
B14B14
B14B14
B14
FCMFCM
FCMFCM
FCM 305305
305305
305 307307
307307
307 311311
311311
311 315315
315315
315 322322
322322
322 330330
330330
330 340340
340340
340 355355
355355
355 375375
375375
375
Frame sizeFrame size
Frame sizeFrame size
Frame size 5656
5656
56 5656
5656
56 143143
143143
143 145145
145145
145 182182
182182
182 182182
182182
182 184184
184184
184 213213
213213
213 215215
215215
215
HPHP
HPHP
HP 0.750.75
0.750.75
0.75 1.01.0
1.01.0
1.0 1.51.5
1.51.5
1.5 2.02.0
2.02.0
2.0 3.03.0
3.03.0
3.0 4.04.0
4.04.0
4.0 5.55.5
5.55.5
5.5 7.57.5
7.57.5
7.5 10.010.0
10.010.0
10.0
ØAJ [in] 5.575 5.875 8.575 5.875 5.875 7.25 7.25 7.25 7.25
ØAK [in] 4.5 4.5 4.5 4.5 4.5 8.5 8.5 8.5 8.5
ØBD [in] 6.5 6.5 6.5 6.5 6.5 9 9 9 9
ØBF UNC [in] 0.375 0.375 0.375 0.375 0.375 0.5 0.5 0.5 0.5
BB [in] 0.125 0.125 0.125 0.125 0.156 0.156 0.25 0.25 0.25
Flange mounting - B5, B35 (B3+B5)Flange mounting - B5, B35 (B3+B5)
Flange mounting - B5, B35 (B3+B5)Flange mounting - B5, B35 (B3+B5)
Flange mounting - B5, B35 (B3+B5)
B5B5
B5B5
B5
FCMFCM
FCMFCM
FCM 305305
305305
305 307307
307307
307 311311
311311
311 315315
315315
315 322322
322322
322 330330
330330
330 340340
340340
340 355355
355355
355 375375
375375
375
Frame sizeFrame size
Frame sizeFrame size
Frame size NANA
NANA
NA NANA
NANA
NA 143143
143143
143 145145
145145
145 182182
182182
182 182182
182182
182 184184
184184
184 213213
213213
213 215215
215215
215
HPHP
HPHP
HP --
--
---
--
-1.51.5
1.51.5
1.5 2.02.0
2.02.0
2.0 3.03.0
3.03.0
3.0 4.04.0
4.04.0
4.0 5.55.5
5.55.5
5.5 7.57.5
7.57.5
7.5 10.010.0
10.010.0
10.0
ØAJ [in] - - 10 10 10 10 10 10 10
ØAK[in] - - 9 999999
ØBD[in] - - 11 11 11 11 11 11 11
ØBF [in] - - 0.531 0.531 0.531 0.531 0.531 0.531 0.531
BB [in] - - 0.25 0.25 0.25 0.25 0.25 0.25 0.25
BE [in] - - 0.5 0.5 0.50 0.50 0.5 0.5 0.5
Face mounting - B14, B34 (B3+B14)Face mounting - B14, B34 (B3+B14)
Face mounting - B14, B34 (B3+B14)Face mounting - B14, B34 (B3+B14)
Face mounting - B14, B34 (B3+B14)
Dimensions
3-3

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
Ordering
Chapter 4Chapter 4
Chapter 4Chapter 4
Chapter 4 ■Orderinginformationoverview .................... page 4-2
■Product rangeVLT®DriveMotor
FCM 300 Series ..................................... page 4-4
■Ordering information for
frames and flanges................................page 4-6
4-1

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfoss trademark
Ordering Information Overview
■■
■■
■Code Numbers for 2 Pole Motors with HVAC Parameter Setting H
Type HP Phases Hardw. Foot D Flange C Face Foot & Foot &
Nema Ref Voltage Variant D Flange C Face
FCM305 0.75 ST 176H1578 NA 176H1579 NA 176H1580
56 SP 176H1581 NA 176H1582 NA 176H1583
FCM307 1.0 ST 176H1584 NA 176H1585 NA 176H1586
56 T4 SP 176H1587 NA 176H1588 NA 176H1589
FCM311 1.5 3 phase ST 176H1590 176H1591 176H1592 176H1593 176H1594
143 380-480 V SP 176H1595 176H1596 176H1597 176H1598 176H1599
FCM315 2.0 ST 176H1600 176H1601 176H1602 176H1603 176H1604
145 SP 176H1605 176H1606 176H1607 176H1608 176H1609
FCM322 3.0 ST NA 176H1610 176H1611 NA NA
182 SP NA 176H1612 176H1613 NA NA
FCM330 4.0 ST NA 176H1614 176h1615 NA NA
182 SP NA 176H1616 176H1617 NA NA
FCM340 5.5 ST 176H1618 176H1619 176H1620 176H1621 176H1622
184 SP 176H1623 176H1624 176H1625 176H1626 176H1627
■Code Numbers for 2 Pole Motors with HVAC Parameter Setting H
4-2
SP 176H1643 176H1644 176H1645 176H1646 176H1647
FCM350 7.5 ST 176H1628 176H1629 176H1630 176H1631 176H1632
213 SP 176H1633 176H1634 176H1635 176H1636 176H1637
FCM375 10.0 ST
215
176H1638 176H1639 176H1640 176H1641 176H1642
Type HP Phases Hardw. Foot D FLange C Face Foot & Foot &
Nema Ref Voltage Variant D Flange C Face
FCM305 0.75 ST 176H1648 NA 176H1649 NA 176H1650
56 SP 176H1651 NA 176H1652 NA 176H1653
FCM311 1.5 T4 ST 176H1660 176H1661 176H1662 176H1663 176H1664
143 3 phase SP 176H1665 176H1666 176H1667 176H1668 176H1669
FCM315 2.0 380-480 V ST 176H1670 176H1671 176H1672 176H1673 176H1674
145 SP 176H1675 176H1676 176H1677 176H1678 176H1679
FCM322 3.0 ST NA 176H1680 176H1681 NA NA
182 SP NA 176H1682 176H1683 NA NA
FCM330 4.0 ST NA 176H1684 176H1685 NA NA
182 SP NA 176H1686 176H167 NA NA
FCM340 5.5 ST 176H1688 176H1689 176H1690 176H1691 176H1692
184 SP 176H1693 176H1694 176H1695 176H1696 176H1697
FCM350 7.5 ST 176H1698 176H1699 176J1700 176H701 176H1702
213 SP 176H1703 176H1704 176H1705 176H1706 176H1707
FCM375 10.0 ST 176H1708 176H1709 176H1710 176H1711 176H1712
215 SP 176H1713 176H1714 176H1715 176H1716 176H1717
FCM307 1.0 ST 176H1654 NA 176H1655 NA 176H1656
56 SP 176H1657 NA 176H1658 NA 176H1659
Ordering

FCM 300 Series
MG.03.B6.2G-VLTis a registeredDanfoss trademark
■■
■■
■Code Numbers for 2 Pole Motors with Industrial Parameter Setting I
Type HP Phases Hardw. Foot D Flange C Face Foot & Foot &
Nema Ref Voltage Variant D Flange C Face
FCM305 0.75 ST 176H1864 NA 176H1865 NA 176H1866
56 SP 176H1867 NA 176H1868 NA 176H1869
FCM307 1.0 ST 176H1870 NA 176H1871 NA 176H1872
56 SP 176H1873 NA 176H1874 NA 176H1875
FCM311 1.5 T4 ST 176H1876 176H1877 176H1878 176H1879 176H1880
143 3 phase SP 176H1881 176H1882 176H1883 176H1884 176J1885
FCM315 2.0 380-180V ST 176H1886 176H1887 176H1888 176H1889 176H1890
145 SP 176H1891 176H1892 176H1893 176H1894 176H1895
FCM322 3.0 ST NA 176H1896 176H1897 NA NA
182 SP NA 176H1898 176H1899 NA NA
FCM330 4.0 ST NA 176H1900 176H1901 NA NA
182 SP NA 176H1902 176H1903 NA NA
FCM340 5.5 ST 176H1904 176H1905 176H1906 176H1907 176H1908
184 SP 176H1909 176H1910 176H1911 176H1912 176H1913
FCM350 7.5 ST 176H1914 176H1915 176H1916 176H1917 176H1918
213 SP 176H1919 176H1920 176H1921 176H1922 176H1923
FCM375 10.0 ST 176H1924 176H1925 176H1926 176H1927 176H1928
215 SP 176H1929 176H1930 176H1931 176H1932 176H1933
4-3
Type HP Phases Hardw. Foot D Flange C Face Foot & Foot &
Nema Ref Voltage Variant D Flange C Face
FCM305 0.75 ST 176H1934 NA 176H1935 NA 176H1936
56 SP 176H1937 NA 176H1938 NA 176H1939
FCM307 1.0 ST 176H1940 NA 176H1941 NA 176H1942
56 SP 176H1943 NA 176H1944 NA 176H1945
FCM311 1.5 T4 ST 176H1946 176H1947 176H1948 176H1949 176H1950
143 3 phase SP 176H1951 176H1952 176H1953 176H1954 176H1955
FCM315 2.0 380-480 V ST 176H1956 176H1957 176H1958 176H1959 176H1960
145 SP 176H1961 176H1962 176H1963 176H1964 176H1965
FCM322 3.0 ST NA 176H1966 176H1967 NA NA
182 SP NA 176H1968 176H1969 NA NA
FCM330 4.0 ST NA 176H1970 176H1971 NA NA
182 SP NA 176H1972 176H1973 NA NA
FCM 340 5.5 ST 176H1974 176H1975 176H1976 176H1977 176H1978
184 SP 176H1979 176H1980 176H1981 176H1982 176H1983
FCM350 7.5 ST 176H1984 176H1985 176H1986 176H1987 176H1988
213 SP 176H1989 176H1990 176H1991 176H1992 176H1993
FCM375 10.0 ST 176H1994 176H1995 176H1996 176H1997 176H1998
215 SP 176H1999 176H2000 176H2001 176H2002 176H2003
■■
■■
■Code Numbers for 4 Pole Motors with Industrial Parameter Setting I
Ordering

FCM 300 Series
MG.03.B6.2G-VLT is aregisteredDanfoss trademark
■Product range VLT®DriveMotor FCM 300 Series,
2/4 poled motors FCM 355-P-T4-ST-S55-R2-0213T-4-1-B03-213-T-00
This means that the ordered FCM300 is an
FCM355 7,5 HP, three-phase mains voltage of
380 - 480V +/- 10%, T4 and for process
application P. The inverter is a standard version
for remote control ST in a NEMA 12/IP55
enclosure S55 with integrated RFI filter, class B1
R2. The motor frame size and version is 213T
which is a foot mounted motor 0213T. The motor
has 4 poles 4 and is cooled by the shaft-mounted
fan 1. The motor is a foot mounted motor B03
and the frame is 213. The inverter box is
mounted on the top of the motor T and no drain
hole is placed 00.
As an example the above motor with D flange,
inverter on the right side, drain hole position
between feet
FCM355-P-T4-ST-S55-R2-0213T-4-1-B05-213-
R-D1
If you wish to place your order by using the type
code directly, please use the codes given in
parenthesis on the left-hand side of the ordering
forms. The code sequence in the type code is
stated at the top of each part of the form
(character number).
The ordering form for the basic unit must always
be completed. When the type code is written,
always state the characters of the basic string (1-
30).
Together with the order confirmation the
customer receives an 8-figure code number to be
used when reordering.
Type Motor Mains supply
output
FCM 305FCM 305
FCM 305FCM 305
FCM 305 0.75 HP
FCM 307FCM 307
FCM 307FCM 307
FCM 307 1.0 HP
FCM 311FCM 311
FCM 311FCM 311
FCM 311 1.5 HP
FCM 315FCM 315
FCM 315FCM 315
FCM 315 2.0 HP
FCM 322FCM 322
FCM 322FCM 322
FCM 322 3.0 HP 3 phase 380-480 V
FCFC
FCFC
FCM 330M 330
M 330M 330
M 330 4.0 HP
FCM 340FCM 340
FCM 340FCM 340
FCM 340 5.0 HP
FCM 35FCM 35
FCM 35FCM 35
FCM 3555
55
57.5 HP
FCM 37FCM 37
FCM 37FCM 37
FCM 3755
55
510.0 HP
Each type in the product range is available in
different versions.
Inverter versions
Drive control:
-ST:Standard version
- SP: Version for PROFIBUS
RFI filter:
Inverter with integrated RFI filter, class A1 (industrial)
or class B1 (domestic).
Cooling:
- TEFV: Motor cooled by a shaft mounted fan (IC
411)
- FV: Motor cooled by an independent fan (IC 416)
(Not UL)
Mounting versions
- Foot mounting (B3)
- Flange mounting (B5)
- Face mounting (B14)
- Foot + flange mounting (B35)
- Foot + face mounting (B34)
See chapter 6.
Inverter box position: Top, right side or left side.
Drainhole (+ position): None, between feet, opposite
feet, vertical drive end, vertical non-drive end, 90°
right of feet, 90°left of feet.
■■
■■
■NEMA Ordering
Take a copy of the ordering forms on page 4-8. Fill
in and post or fax your order to the nearest branch
office of the Danfoss sales organisation. On the
basis of your order, the FCM 300 Series motor is
given a type code, which may look as follows:
4-4
Ordering