Datalogic Skorpio X5 User manual

Skorpio is a trademark of Datalogic S.p.A. and/or its affiliates. All other
brand and product names may be trademarks of their respective owners..
OUT OF THE BOX
The Skorpio X5 4 Slot Battery Charger package contains:
y Skorpio X5 4 Slot Battery Charger
y Rubber feet (x4)
y Quick Start Guide
y Safety & Regulatory Addendum
y Warranty Addendum.
Remove all the components from their packaging; check their inte-
grity and compare them with all the packing documents.
PARTS AND FUNCTIONS
CAUTION: Keep the original packaging for use when
sending products to the technical assistance center.
Damage caused by improper packaging is not covered
under the warranty.
FAST THE DOCK TO A SURFACE
To securely fasten the 4 Slot Battery Charger to tables, desks and
other surfaces, and to prevent the dock from moving when you
remove the device, use the four velcro dual lock feet provided with
the matching dual-lock adhesive pads.
Remove the protective feet from the dock before attaching the vel-
cro dual lock feet.
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
©2020 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part
of this documentation may be reproduced, stored in or introduced into a
retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/
or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revo-
cable license to reproduce and transmit this documentation for the purcha-
ser's own internal business purposes. Purchaser shall not remove or alter
any proprietary notices, including copyright notices, contained in this docu-
mentation and shall ensure that all notices appear on any reproductions of
the documentation.
Electronic versions of this document may be downloaded from the Datalo-
gic website (www.datalogic.com). If you visit our website and would like to
make comments or suggestions about this or other Datalogic publications,
please let us know via the "Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this
manual that is complete and accurate, however, Datalogic shall not be
liable for technical or editorial errors or omissions contained herein, nor for
incidental or consequential damages resulting from the use of this mate-
rial. Datalogic reserves the right to change any specification at any time
without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S.A. and the E.U.
SKORPIO™ X5
QUICK START GUIDE
4 SLOT BATTERY CHARGER
©2020 Datalogic S.p.A. and/or its affiliates
• All rights reserved • Without limiting the rights under copyright,
no part of this documentation may be reproduced, stored in or
introduced into a retrieval system, or transmitted in any form or
by any means, or for any purpose, without the express written
permission of Datalogic S.p.A. and/or its affiliates • Datalogic
and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S. and the E.U.
See the Safety & Regulatory Addendum included
with your product for additional regulatory, safety
and legal information.
www.datalogic.com
822004050 (Rev. A) Sept. 2020
SUPPORT THROUGH THE WEBSITE
Datalogic provides several services as well as technical support
through its website.
Log on to www.datalogic.com.
For quick access, from the home page click on the search icon ,
and type in the name of the product you’re looking for. This allows
you access to download Data Sheets, Manuals, Soware & Utilities,
and Drawings.
Hover over the Support & Service menu for access to Services and
Technical Support.
Power ON LED
Battery Slots
Battery Slots LEDs
Power Supply
Connector
Power Jumper
Connector
USB Connector for Soware Update

POWER THE DOCK
CAUTION: Use only the Datalogic power supply
91ACC0048 to power the 4 Slot Battery Charger.
Press the locking clip and pull the plug to remove the power supply
cable:
CHARGE THE SPARE BATTERY
To charge up to four spare batteries, insert the battery pack and
press it into the slot until the battery latch snaps into place. Char-
ging starts automatically.
To remove the battery, release the latch on the battery pack.
DAISY CHAIN CONNECTION
The daisy chain connection allows to power two chargers with one
power supply.
To connect a second charger use the Power Jumper (available as
optional accessory, p/n 91ACC0049).
1. Connect the first charger to the second charger using the
power jumper.
2. Connect the power supply to the first charger.
3. Plug the power supply into the AC/DC plug.
LED INDICATORS
LED Behavior Operation Status
Power ON
Solid blue Dock is powered
Battery Slot
Solid blue No battery
Solid orange Battery is charging
Solid green Charge completed
Blinking red Error
TECHNICAL SPECIFICATIONS
Mechanical Features
Dimensions 218 x 161 x 44 mm / 8.6 x 6.4 x 1.7 in
Weight 460 g / 16.2 oz
Electrical Features
Power supply112VDC +/-5% @ 6A
Consumption Max 5.5 A
Indicators Power on LED (blue)
4 Battery charge status LEDs (orange/green/
red)
Spare slot charge time Std battery: 2h (0-90%)
High Cap Battery: 4h (0-90%)
Environmental Features
Operating Temperature -20° to 50°C
Storage Temperature2-30°C to 70°C
Humidity 95% non condensing
Electrostatic discharge EN
61000-4-2
4 KV contact / 8 KV air
1 Use only DL approved power adapters.
2 The Skorpio X5 and the spare batteries should be charged at an ambient tempera-
ture between 0 - 40º C to achieve the maximum charging rate. Never charge the main
device or spare battery in a closed space where excessive heat can build up.
Close to the limits of the working temperature, some display and/or battery perfor-
mance degradation may occur.