Datalogic MAGELLAN 3410VSi User manual

QUICK REFERENCE GUIDE
MAGELLAN™ 3410VSi
Omni-Directional Imaging Scanner

Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno — Italy
Tel. [phone]
Fax [phone]
©2020 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documen-
tation may be reproduced, stored in or introduced into a retrieval system, or transmitted
in any form or by any means, or for any purpose, without the express written permission
of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to
reproduce and transmit this documentation for the purchaser's own internal business
purposes. Purchaser shall not remove or alter any proprietary notices, including copyright
notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website
(www.datalogic.com). If you visit our website and would like to make comments or sug-
gestions about this or other Datalogic publications, please let us know via the "Contact"
page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic shall not be liable for technical or editorial
errors or omissions contained herein, nor for incidental or consequential damages result-
ing from the use of this material. Datalogic reserves the right to change any specification
at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U.
Magellan is a trademark of Datalogic S.p.A. and/or its affiliates, registered in the U.S. All
other trademarks and brands are property of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
This manual refers to software version DR9401453.
ORIGINAL INSTRUCTIONS
See the Regulatory Addendum included with your product
for additional regulatory, safety and legal information.

QUICK REFERENCE GUIDE III
TABLE OF CONTENTS
Features .......................................................................... 1
Installation ....................................................................... 3
Wall/Desk Mount .......................................................................... 5
Installation Instructions ...........................................................5
Desk (Horizontal) Mounting ....................................................5
Wall (Vertical) Mounting ..........................................................6
Attaching/Detaching the Scanner ................................................ 8
Seating the Scanner in the Mount ...........................................8
Detaching the scanner .............................................................8
Bottom Cover / Tilting Riser......................................................... 9
Mounting the Riser ................................................................10
How to Scan ................................................................... 11
Scanner Button ........................................................................... 11
Camera Button............................................................................ 12
LED and Beeper Indicators .............................................. 13
Beeper Indicators........................................................................ 14
Troubleshooting.............................................................. 14
Error Codes.................................................................... 15
Programming ................................................................. 16
Interface Selection ...................................................................... 16
Imaging Features........................................................................ 18
Camera Button Mode .............................................................18
Image Destination ..................................................................19
Cell Phone Mode ....................................................................20
Cell Mode Percent ..................................................................21
Cleaning......................................................................... 22
Manufacturer Approved Cleaning Materials.............................. 23
WARRANTY.................................................................... 24
Going Green ................................................................... 25
Bar Code Mask ............................................................... 26

iv MAGELLAN™ 3410VSI
NOTES

QUICK REFERENCE GUIDE 1
MAGELLAN™ 3410VSI
Use this guide to quickly complete installation of the Magellan 3410VSi
series of bar code readers, and begin using your scanner. For more
details and programming information, reference the Product Reference
Guide (PRG), which is available for viewing and download from the
Datalogic website (www.datalogic.com).
FEATURES
Figure 1. Scanner Features - Front View
Wall/Desk Mount
Scanner Button
Camera
Button
Scan
Cable Connector Cover
FRONT
Window

2 MAGELLAN™ 3410VSI
Figure 2. Scanner Features - Back View
Figure 3. Scanner Features - Bottom View
Cable Routing
Area
Serial Number Label
Regulatory
USB Micro B/
MicroSD Card Port
Label
(Service Access)
USB Aux Port
Power Host Port
Cavity for EAS Connection Wire
MicroSD Card
USB Micro B

QUICK REFERENCE GUIDE 3
INSTALLATION
Connect the scanner to the host (terminal) using the interface (I/F)
cable, as shown in the following figures. A cable from an older existing
installation can be re-used for RS-232 interfaces. If external power is
used/needed, plug the AC Adapter into the AC wall outlet, then connect
it to the unit as shown in Figure 5 on page 4.
The USB AUX PORT will only be supported by using a 12V power supply
or using a USB + POWER 12V port. If the scanner is powered only by the
standard USB cable as shown in Figure 6 on page 4, an auxiliary scanner
will not be supported.
After the scanner has fully powered up and indicates that it is ready for
operation, scan some known-good bar code samples to verify correct
operation. The scanner should beep and/or flash its good read LED1and
send the bar code data to the host or terminal. If not, use the
Troubleshooting section of this guide to identify any problems.
Figure 4. USB + Power Cable Power Off the Terminal
1. Beeper and LED behavior may have previously been configured as “disabled”
by another user.
Terminal (PC)
RJ Host Port
Connector
Power
USB + Power Cable
Power Off the Terminal (POT)

4 MAGELLAN™ 3410VSI
Figure 5. Powered by AC Adapter
Figure 6. USB Cable Type A Power Off the Terminal
NOTE: This cable (or similar) will not support a USB
peripheral. The system must be powered by 12V in order for
a peripheral to be attached to the AUX USB PORT.
U
S
B
R
S
-
2
3
2
RS-232 and USB Cables
Powered by AC Adapter
To Terminal (PC)
U
S
B
To Terminal (PC)
USB Type A Power Off the Terminal

QUICK REFERENCE GUIDE 5
Wall/Desk Mount
The Wall/Desk Mount is an accessory part to which the scanner can be
attached. The accessory can be mounted horizontally to a desk,
countertop, or table using screws or a gooseneck stand. It can also be
mounted vertically to a wall using screws, or to a VESA mount.
Installation Instructions
1. Determine the mounting location. While deciding on the best
position, keep in mind the best way to route the scanner cables.
You may need to drill a hole for them.
2. Use two #8 screws (sheet metal screws are preferred) to securely
fasten the Mount in the position desired, as shown in the
following figures.
Desk (Horizontal) Mounting
Figure 7. Desk Mount
Gooseneck Mount location
#8 screws

6 MAGELLAN™ 3410VSI
Figure 8. Desk Mounting Dimensions
Wall (Vertical) Mounting
Figure 9. Wall mount
63
41
92.5
ALL UNITS ARE IN MM
50 mm #8 screws
screw holes
VESA mount