Dell M110 User manual

Dell™ M110 Projector
Wireless Installation Guide
M110 Wireless Installation Guide.book Page 1 Wednesday, August 24, 2011 3:14 PM

About Notes
NOTE: A NOTE indicates important information that helps you make better use of your projector.
__________________
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft , Windows 7 , and Windows Vista are trademarks or
registered trademarks of Microsoft Corporation in the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
October 2011 Rev. A00
M110 Wireless Installation Guide.book Page 2 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
3
Operating System:
•Windows
Microsoft Windows XP™ Home or Professional
Service pack 2 (32-bit recommended), Windows®
Vista 32-bit or 64-bit, and Windows®7 Home or
Professional 32-bit or 64-bit
•MAC
MacBook and above, MacOS 10.5 and above
Minimum Hardware:
aIntel®Dual Core™ 1.8 MHz or greater
b256 MB of RAM required, 512 MB or more
recommended
c10 MB of available hard-disk space
dnViDIA or ATI graphic card must with 64 MB
VRAM or above
eEthernet adapter (10 / 100 bps) for an
Ethernet connection
fA supported WLAN adapter for a WLAN
connection (any NDIS-compliant 802.11b or
802.11g or 802.11n WiFi device)
Web browser:
Microsoft Internet Explorer 6.0 or 7.0
(recommended) or 8.0, Firefox 2.0, Safari 3.0 and
above
NOTE: The wireless dongle is not shipped
with your projector. You can purchase it on
the Dell website at www.dell.com.
Wireless Installation Instruction
NOTE: Your computer must have the following minimum system requirements:
M110 Wireless Installation Guide.book Page 3 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
4
Enable Wireless on the Projector
1Install the optional wireless dongle.
2Connect the power cord with AC adapter to
the wall outlet and press the power button.
3Press the Menu button on your projector
control panel or remote control.
NOTE: Use , , and buttons to
navigate and to select.
4Select the input source as USB.
FCC ID:
SUZ-WU5205C
FCCID:
SUZ-WU5205C
FCCID:
SUZ-WU5205C
M110 Wireless Installation Guide.book Page 4 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
5
The Wireless Guide Screen shown below appears:
5Make a note of the LOGIN CODE, SSID, and
IP ADDRESS. You will need this information
to log in later.
Install the Wireless Application
Software on Your Computer
6Connect your computer to the M110 wireless
network.
NOTE:
aYour computer must have wireless
network function to detect the connection.
M110 Wireless Installation Guide.book Page 5 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
6
bWhen you connect to the M110 wireless
network, you will lose wireless
connectivity with other wireless networks.
NOTE: It is recommended that all proxies are
turned off . (In Microsoft®Windows 7: Click
Control Panel Internet Options
Connections LAN Settings)
7"Wireless Application Software" is required if
used for wireless display. Please download
and install the software for first-time use. If it
is already installed, skip Step 7 - 12.
NOTE: You only need to install the "Wireless
Application Software" once.
8Open the Internet browser on your computer.
You will be automatically directed to the
M110 Web Management web page.
NOTE: If the web page does not load
automatically, enter the IP address (default
IP address is 192.168.100.10) in the browser's
address bar.
9The M110 web management page opens. For
first-time use, click Download.
M110 Wireless Installation Guide.book Page 6 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
7
10 Select the appropriate operating system, and
then click Download.
11 Click Run to proceed with the installation.
NOTE: You may choose to save the file and
install it at a later time. To do this, click Save.
NOTE: If you are unable to install the
application because of inadequate rights on
the computer, please contact your network
administrator.
12 The installation software will launch. Follow
the on-screen instructions to complete
setup.
M110 Wireless Installation Guide.book Page 7 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
8
Launch the Wireless Application
13 Once the installation is complete, the
program will launch automatically. Or you
can double-click the icon on the desktop
to start the application.
Login
14 To communicate with your projector, enter
the Login Code (see Step 5), and then click
OK.
M110 Wireless Installation Guide.book Page 8 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
9
Understanding the Buttons
After a successful log in, the following screen
appears:
Projecting the Presentation
• To project the presentation, click .
• To pause the presentation, click . The
icon turns green.
• To continue the presentation, click
again.
• To stop the presentation, click .
Item Description
1Status Bar Display IP and LOGIN CODE
information.
Menu Click to activate the
application menu.
Minimize
button
Click to minimize the
application.
Close button Click to exit the application.
2Control Toolbar
Full screen Click to project the image in
full screen.
Stop Click to stop projection.
Pause Click to pause projection.
3Connection Status
Connection
Icon
Blinks when projection is in
progress.
M110 Wireless Installation Guide.book Page 9 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
10
NOTE: The following information is for
wireless data presentation mode only. Image
display could be slow or not displayed
smoothly if displaying a video clip or
animation. Refer to the frame-rate table
below for reference:
NOTE:
1The percentage of screen variation is based
on 1024 x 768. Example, to display a 320 x 240
video clip on 1024 x 768 desktop, the screen
variation is 9.8%.
2Actual frame rate could be different
depending on factors such as network
environment, image content, signal
conditions, locations, and CPU performance.
3Under clean WLAN environment using
802.11g connection, and no screen
stretching.
NOTE: Your computer will not enter S1
(standby mode) / S3 (sleep mode) / S4
(hibernate mode) when running a wireless
Display presentation.
Screen Variation %1Estimated frames per second2
<5 % 303
<10 % 283
<20 % 263
<40 % 233
<75 % 193
<=100 % 183
M110 Wireless Installation Guide.book Page 10 Wednesday, August 24, 2011 3:14 PM

Wireless Installation Instruction
11
Using the Menu
Click to display the menu.
WEB MANAGEMENT—Click to open the Web
Management page.
SEARCH FOR PROJECTOR—Click to search and
connect to wireless projector.
MAKE APPLICATION TOKEN—Click to make application
token. See "Make Application Token" on page 12.
INFO—Click to display system information.
HOTKEY—Click to display the hotkey information.
ABOUT—Click to display the application version.
EXIT—Click to close the application.
M110 Wireless Installation Guide.book Page 11 Wednesday, August 24, 2011 3:14 PM

Make Application Token
12
Make Application Token
The Application Token lets you perform Plug and
Show using a USB token.
1From the application software, click >
Make Application Token.
2The following screen appears. Click Next.
3Plug a flash drive into the USB ports on your
computer. Select the drive from the list, and
then click Next.
4Click Finish to close the wizard.
M110 Wireless Installation Guide.book Page 12 Wednesday, August 24, 2011 3:14 PM

M110 Wireless Installation Guide.book Page 1 Wednesday, August 24, 2011 3:14 PM

www.dell.com | support.dell.com
Printed in China.
M110 Wireless Installation Guide.book Page 2 Wednesday, August 24, 2011 3:14 PM
36.8KT12G001-A