DeLOCK 42606 User manual

External Enclosure for
2 x 2.5″ SATA HDD / SSD with RAID +
3 Port USB 3.0 Hub
Product-No:42606
User manual no:42606-a
www.delock.com
RAID setting

-2-
English
RAID setting
Note: If you use a new hard drive, please make sure that it is already formatted.
Use the DIP switch to set the suitable RAID mode.
Further the reset button need to be pushed for around 5 seconds.
12
ON
RAID0
12
ON
JBOD
12
ON
Normal
12
ON
RAID1
RESET
Switch

-3-
English
LED indication
Situation LED status
HDD1 HDD2 Power
PC S3/S4/S5 OFF OFF RED
USB, HDD1 & 2 connected ON ON GREEN
Normal
(PM)
HDD1 access Flashing ON GREEN
HDD2 access ON Flashing GREEN
RAID 0 Flashing Flashing GREEN
RAID 1
Data Access Flashing Flashing GREEN
Rebuild Online Both, Flashing until
nished
GREEN
Ofine Both, Flashing until
nished
GREEN
JBOD HDD1 access Flashing ON GREEN
HDD2 access ON Flashing GREEN
RAID mode change
(reset button pressed)
Flashing Flashing GREEN