Denon DA-300USB User manual

DA-300USB
D/A Converter
Getting Started
English
DEutsch
Français
italiano
EsPaÑol
nEDErlanDs
sVEnsKa
РУССКИЙ
PolsKi
Erste Schritte/ Mise en route/ Guida introduttiva/ Antes de empezar/ Aan de slag/ Att komma igång/ Начало работы/ Skrócona instrukcja obsługi

1
Thank you for choosing a Denon D/A Converter. This guide
provides step-by-step instructions for setting up your D/A
Converter.
If you have setup problems:
If you need additional help in solving problems, contact
Denon customer service in your area.
Welcome

2
What’s In the Box
Getting Started CD-ROM
(Owner’s Manual)
Safety Instructions
D/A Converter AC adapter AC adapter plug unit
(for UK)
Stand for vertical
placement
Feet for horizontal
placement
Audio cable
Before You Begin
Required for setup
USB cable
%
•These drawings are for illustrative purposes only
and may not represent the actual product(s).

3
There are five steps to the setup process.
1Installing the driver software onto your PC (Windows OS only)
2Placing this unit
3Connecting the D/A Converter to the amplifier or the headphone
4Connecting the AC adapter
5Enjoying music using PC or Mac
Setup

4
eThe wizard menu is displayed. Click “Next”.
e
rRead the Software Licensing Agreement, and click “I
accept the terms in the license agreement”.
tClick “Next”.
SOFTWARE LICENSING AGREEMENT
t
r
1Installing the driver software onto your PC
(Windows OS only)
Download the dedicated driver from the
“Download” section of the DA-300USB page of
the Denon website
(http://www.denon.com/pages/home.aspx)
onto your PC.
Unzip the downloaded le.
Select the 32 bit or 64 bit exe le that matches
your Windows operating system, and double-
click the le.
Install the driver.
qSelect the language to use for the installation.
wClick “OK”.
q
w
1
2
3
4

5
yClick “Install” on the installation start dialog.
•The installation starts. Do not perform any operation on
the PC until the installation is completed.
y
uIn the Windows security dialog, select “Always trust
software from DandM Holdings Inc.”.
iClick “Install”.
ui
oWhen the installation is completed, click “Finish”.
o

6
2Placing this unit
nHorizontal placement
Attach the feet for horizontal placement as
shown in the gure.
nVertical placement
1
Guide
Guide
2
3
Align the rear edge of this unit to the guide
position.
Press down this unit onto the stand until it
clicks.
Slide this unit in the arrow direction to align
the edge of this unit with that of the stand.
11
2
3
Feet for
horizontal
placement

7
3Connecting the D/A Converter to the amplifier or the
headphone
nConnecting the amplifier
AUDIO
R L
IN
L
R
RL
Amplifier
Audio cable
(supplied)
%
•An amplifier and speaker need to be connected in order to
playback music. See the owner’s manual of the device you
are using for details on how to connect it.
nConnecting the headphone

8
4Connecting the AC adapter
To household power outlet
(AC 100 – 240 V, 50/60 Hz)
AC adapter
(supplied)

9
nHow to remove the AC
adapter plug unit
q
While pressing and holding the qbutton, slide
it in the arrow direction to pull it up.
nHow to attach the AC
adapter plug unit (for UK)
q
w
Align the qguide with the wguide and press
it down in the arrow direction until it clicks.
1 1

10
5Enjoying music using PC or Mac
nConnect to PC or Mac
Connect to PC or Mac.
Computer in which the driver and
player software is installed
USB 2.0 cable
(sold separately)
Type B
Type A
Press Xon this unit.
•When the unit power is turned on, the computer automatically
finds and connects to the unit.
nListen to PC or Mac Audio
Touch to change the
input source to “USB-
DAC”.
Checking the installed driver.
(Windows OS only)
qClick the “Start” button and click “Control Panel” on the
PC.
•The control panel setting list is displayed.
wClick the “Sound” icon.
•The sound menu window is displayed.
eCheck that there is a checkmark next to “Default Device”
under in “Digital Audio Interface” of the “Playback” tab.
•When there is a checkmark for a different device, click
“Denon USB Audio” and “Set Default”.
1
2
1
2

11
Checking audio output.
(Windows OS only)
•Outputs a TEST signal from the PC and checks the audio
output from the USB-DAC function.
qSelect “Digital Audio Interface” and click “Properties”.
•The Digital Audio Interface Properties window is
displayed.
ApplyCancelOK
Properties
Select a playback device below to modify its settings：
Digital Audio Interface
Denon USB Audio
Default Device
Speakers
Ready
Sound
Configure Set Default
Playback Recording CommunicationsSounds
q
wClick the “Advanced” tab.
eSelect the sampling rate and bit rate to be applied to the
D/A converter.
•It is recommended that “24 bit, 192000 Hz (Studio
Quality)” is selected.
rClick “Apply”.
tClick “Test”.
•Check that audio from this unit is output from the PC.
ApplyCancel
Test
OK
2 channel, 24 bit, 192000 Hｚ ( Studio Quality)
Give exclusive mode applications priority
Default Format
Select the sample rate and bit depth to be used when running
in shared mode.
Digital Audio Interface Properties
Allow applications to take exclusive control of this device
Restore Defaults
General Supported Formats Levels Advanced
2 channel, 24 bit, 44100 Hｚ ( Studio Quality)
2 channel, 24 bit, 48000 Hｚ ( Studio Quality)
2 channel, 24 bit, 96000 Hｚ ( Studio Quality)
2 channel, 24 bit, 192000 Hｚ ( Studio Quality)
w
t
e
r
3

12
Play back a music le with music playback
software such as Windows Media Player, iTunes,
foobar2000, Audirvana Plus and JRiver Media
Center.
PCM
192kHz
VOL.---dB
The type of music file, sampling frequency and volume are
displayed.
4NOTE
•Adjust the volume to an appropriate level on the computer.
•When using this unit with headphones connected, turn the
headphone volume adjustment knob to adjust the volume.
•Further settings might be required in your dedicated media
player software such as JRiver to enable high resolution
audio playback. Please refer to the owner’s manual of the
software.
%
•Please refer to the owner's manual about the required
specifications of suiting computer.

13
The included CD-ROM contains an Adobe PDF version of the full owner’s manual for the D/A Converter.
Please reference this manual for more details about the setup and operation of the D/A Converter and it’s features.
Insert the disc into your PC. Follow the screen or double click on the PDF
le.
1 2
Owner’s Manual
%
•You can also download the owner’s manual from the Denon website.
www.denon.com

www.denon.com D&M Holdings Inc.
Printed in China 5411 11134 00AD