Denver FAS-18100M User manual

ENG-1
Mobile Phone
FAS-18100M
www.facebook.com/denverelectronics
User Guide
English, Deutsch, Dansk, Suomalainen, Svenska,
Français, Nederlands, Español, Italiano,
Polski,Português

ENG-2
Start to Use
Put in/Take out battery
Put in battery
1.Open the battery cover
2. Put battery into the battery slot. Keep three metal
points of battery facing downward and matching
with the three metal connection points on phone.

ENG-3
3. Close the cover. Make sure that cover is
completely matched and the cover matching sound
could be heard.
Remark：Shut down all devices and cut
theconnection with charger when removing battery.
Please use battery which is matched with this phone
only.
Insert/Take out SIM card
1. Insert SIM card：Remove battery cover；Insert
and slide the SIM card with the metal part facing
downward by following below arrow direction at
battery slot until SIM card is completely inserted in
right position.

ENG-4
2. Take out SIM card：Hold the notch of SIM card
and lift it slightly up by the other hand to take card
out.
Remark：Please note that you should use GSM
SIM card only, because it doesn’t support 3G.
Remark：Phone must be power off when putin and
take out battery.
SIM card and the contact point will be easily
damaged due to scratch and bending. Please be
careful when inserting andtaking out the SIM card.
Battery Charging
Phone could be charged when phone is
power off or power
Make sure that battery is inserted in
phone before charging.

ENG-5
1. Plug in the charger.
2. Plug out the charger from power jack first after it
is charged. Then unplug charger from phone.
Remark：Battery indication will bedisplayed after
several minutes ifbattery is over-discharged.

ENG-6
Not enough battery alert
Phone will give alert when battery is not enough and
display a message of low battery on screen. Please
charge battery. Please charge battery when you
receive the alert of low battery during calling in order
to keep the calling.
Your Phone
Turn ON, Turn OFF and keypad lock: to turn on
and turn off the phone, press and hold the red end
call key.
Press and hold *button to lock keypad
Stand by Mode
When phone is ready to use but no operation is
done on phone, then phone is under stand by mode

ENG-7
Icons on Screen
Icons might be displayed on screen.
Battery status
Signal status
Alarm
Message
Silent mode
General mode
Vibration mode
Missed call
Key Functions
Key Key Name Functions
1 Navigation
Left key
Standby mode
：
press to
enter message
Operating：press to move
cursor left
2 Navigation
Right key
Standby mode：press
to enter profiles
Operating ：press to
move cursor right

ENG-8
3 Navigation
Up key
Standby mode：press
to enter main menu
Operating ：press to
move cursor up
4
Answer
Key
(Green
key)
Press to make outgoing
call or press to pick up
phone when there is
incoming call.
Standby mode：press to
enter call list
5
Navigation
Down
key
Standby mode：press
to enter phonebook
Operating ：press to
move cursor down
6
End Key
(Red
Key)
Phone Off：Long press to
switch on;
Phone On：Long press to
switch off;
Operating：Press to go
back to idle screen
7
Numeric
key
Pressto input numbers or
letters

ENG-9
8 * key
Standby mode：Long
press to lock the
keypad.Short press to type
in *，+,P.
Editing mode: Press to
use normal symbol.
9 # key
Standby mode：Long
press to set phone silent
mode, short press to type
in #.
Editing mode ：Press
to switch typing method.
Voice Dial
Make an International Call
1. Press 0 key for twice times and sign “+ ” will
come out. Then enter country code, area code and
phone number (without a zero in front of mobile
phone number) Press Send key to enter voice dial
to call out.
2. Dial a fixed line: “＋”country code +
entirephone number + Send key.

ENG-10
Dial extension No. of a Fixed line
Some extension numbers of fixed line couldn’t be
dialed directly. You need to dial
telephone exchange first and then dial the extension
number. Type in a P symbol between telephone
exchange number and extension number, this
phone willdial the extension number automatically.
Follow below method to make a symbol P: short
press * key for three times. Then it will display a P
symbol on screen.
Shortcuts: Menu > Settings > Phone Setting >
Shortcut setting. UP and DOWN selection keys can
open some shortcuts; by default, the UP selection key
directly enters the Music Player, while the DOWN
selection key opens the alarm list.
Main menu: To access the Main Menu on your
phone, press the selection key on the top left
- Messaging:to write and read SMS text
messages
- Contacts:to manage and save contacts
- Calls Log: Missed Calls, dialled calls...
- Multimedia: Video player, Recorder
- Audio player: You can play music,it’s better to
insert SD card.

ENG-11
- My files: You canopen/delete/view/edit the file
here.
- Settings: to customize your phone
- Tools: with Calendar, Calculator, Alarm, STK..
- Profiles: to activate the mode, and to customize
General, indoor, outdoor mode.
Answer an incoming call: respond to an incoming
call simply by pressing the green button. To set up
the answer mode select Settings > Call settings >
Answer mode
Making a call: to make a call from the Home screen,
select the desired number by using thekeypad and
then press the green call button. To end the call,
press the red end call key.
Call a number from the contacts:from the main
screen, press the upper right selection key; this will
automatically open the Contacts. Scroll through
contacts with the UP/DOWN keys and press the
green call button to call the desired contact.
Call anumber from the call log: from the main
screen, press the green call key, the missed,
received, and outgoing calls will be automatically
displayed.

ENG-12
Scroll with UP/Down keys and press the green call
button when you find the number you want to call.
Add contacts to the Contacts: Select Menu >
Contacts > Options > New, and choose to save
the number on the SIM or the Phone. Enter the
name and the new number, then press Save.
Speed dial:inMenu > Contacts > Options >Others>
Speed Dial > Options > Edit, you can assign to
keys 2-9 certain numbers that will be called
automatically if you press and hold the related
button.
Memory status: this feature within the contacts
settings allows you to see how much free storage
there is on the phone and SIM card.
Send and read SMS
Send SMS:from the main screen, choose
Menu >Messaging > Write message and write
your message. Press Options > Send to > Insert
number and enter the number using the numeric
keypad or Insert contacts to select from the
Contacts the contact you want to text.
Read SMS: when you receive a new text message,

ENG-13
the phone displays an envelope icon on the top
bar(until the message is read/for as long as the
message is unread) and a notification pop up
appears on the main screen. Press the upper left
selection key to enter the Inbox or access it fromthe
main screen by selecting Menu >
Messages >Inbox.
Bluetooth: In Settings > Connections>
Bluetooth >Open Bluetooth you can turn on
Bluetooth.With the Paired Device, you can search
forother devices (headsets, phones…). Select the
device you would like to associate with and confirm
it on both devices.
Set Ringtones: select Menu >
Profiles >Options>Settings>Ring settings > Set
as incoming call ringtone, Select Call Ringtone
and set the desired tone from those available.
Pressing and hold #button to change Vibration
mode, General mode, Silence mode.
Phone Settings: from Menu > Settings >Phone
settings, you have/will have access to various
settings such as Date and Time, Language, and
Display. Select Restore to reset the factory
settings of FAS-18100M: enter the phone

ENG-14
password 1234 to confirm the restoring.
Radio frequency (RF) exposure and SAR THIS
DEVICE MEETS INTERNATIONAL GUIDELINES
FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the limits for exposure to radio frequency
(RF) recommended by international guidelines
(ICNIRP). These limits are part of comprehensive
guidelines and establish permitted levels of RF
energy for the general population. The guidelines
were developed by independent scientific
organizations through periodic and thorough
evaluation of scientific studies. The guidelines
include a substantial safety margin designed to
assure the safety of all persons, regardless of age
and health.
The exposure standard for mobile devices employs
a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit stated in
the international guidelines is 2.0 watts/kilogram
(W/kg)*. Tests for SAR are conducted using
standard operating positions with the device
transmitting at its highest certified well below the
maximum value. This is because the device is
designed to operate at multiple power levels

ENG-15
so as to use only the power required to reach the
network. In general, the closer you are to a base
station, the lower the power output of the device.
power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR of the device
while operating can be well below the maximum
value. This is because the device is designed to
operate at multiple power levels so as to use only
the power required to reach the network. In general,
the closer you are to a base station, the lower the
power output of the device.
SAR values may vary depending on national
reporting and testing requirements and the network
band. Use of device accessories and enhancements
may result in different SAR values.
The SAR limit for mobile devices used by the public
is 2.0 W/kg averaged over 10 grams ofbody tissue.
The guidelines incorporate a substantial margin of
safety to give additional protection for the public and
to account for any variations in measurements.
SAR values may vary depending on
national reporting requirements and the network
band.
The highest SAR value for this model phone tested
for use is 0.373W/kg.
Electric and electronic equipment and included

ENG-16
batteries contains materials, components and
substances that can be hazardous to your health
and the environment, if the waste material
(discarded electric and electronic equipment and
batteries) is not handled correctly.
Electric and electronic equipment and batteries is
marked with the crossed out trash can symbol, seen
below. This symbol signifies that electric
and electronic equipment and batteries should not
be disposed of with other household waste, but
should be disposed of separately.
As the end user it is important that you submit your
used batteries to the approriate and designated
facility. In this manner you make sure that the
batteries are recycled in accordance with legislature
and will not harm the environment.
All cities have established collection points, where
electric and electronic equipment and batteries can
either be submitted free of charge at recycling
stations and other collection sites, or be collected
from the households. Additional information is
available at the technical department of your city
ALL RIGHTS RESERVED
DENVER ELECTRONICS A/S

ENG-17
WWW.DENVER-ELECTRONICS.COM
Importer:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
8382 Hinnerup,DENMARK
Hereby, Inter Sales A/S, declares that this senior
mobile phone DENVER FAS-18100M is in
compliance with the essential requirements
andother relevant provisions of Directive 1999/5/EC.
A copy of the Declaration of Conformity may be
obtained at
DENVER ELECTRONICS A/S,Omega
5A ,Soeften8382 Hinnerup,Denmar

DEU-1
Handy
FAS-18100M
www.facebook.com/denverelectronics
Bedienungsanleitung
Deutsch

DEU-2
Erste Schritte
Akku einsetzen/herausnehmen
Akku einsetzen
1. Öffnen Sie das Batteriefach.
2. Setzen Sie den Akku ein. Richten Sie die drei
Kontakte nach unten auf die Kontakte im Telefon
aus.

DEU-3
3. SchließenSiedasBatteriefachwieder.
AchtenSiedarauf,dassderDeceldes
Batteriefachs einrastet.
Hinweis: Schalten Sie das Gerät aus und trennen
Sie das Ladegerät ab, wenn Sie den Akku
herausnehmen. Benutzen Sie nur den mitgelieferten
Akku.
SIM-Karte herausnehmen/einsetzen
1. SIM-Karte einsetzen: Öffnen Sie das Batteriefach
und setzen Sie die SIM-Karte mit den Kontakten in
Pfeilrichtung ein.
2. SIM-Karte herausnehmen: Halten Sie die