Desoutter EAD20-1300 Instruction sheet

Printed Matter No. 6159929650_EN
Issue No. 01
Date 10/2020
Page 1 / 20
Angle-head Electric Nutrunner
Product Instructions
Model Part number
EAD20-1300 6151656060
EAD32-900 6151656070
EAD50-900 6151656090
EAD50-900-HAD 6151658770
EAD70-800 6151656110
EAD70-700-HAD 6151658780
EAD70-800 SQ1/2 6151658820
EAD80-650 6151656120
EAD105-500 6151656130
EAD105-500-HAD 6151658790
EAD160-430 6151656810
EAD160-430-HAD 6151658800
EAD200-370 6151656820
EAD280-260 6151656830
EAD280-370 6151656840
EAD440-250 6151656850
EAD660-160 6151656860
Download the latest version of this document at
http://www.desouttertools.com/info/6159929650_EN
WARNING
Read all safety warnings and instructions
Failure to follow the safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference

2 / 20 10/2020
Table of Contents
Product Information ..............................................................................................................................3
General Information.........................................................................................................................3
Safety Signal Words.............................................................................................................3
Warranty...............................................................................................................................3
Website ................................................................................................................................3
Information about spare parts ..............................................................................................3
Dimensions (mm) .................................................................................................................4
CAD files ..............................................................................................................................6
Overview .........................................................................................................................................6
General overview .................................................................................................................6
Product description ..............................................................................................................6
Technical data......................................................................................................................7
Accessories..........................................................................................................................9
Service Overview ..........................................................................................................................11
Maintenance program ........................................................................................................11
Spare parts.........................................................................................................................11
Installation............................................................................................................................................12
Installation Instructions..................................................................................................................12
How to clamp the tool.........................................................................................................12
Connecting the tool to the controller ..................................................................................13
Mounting the trigger locker.................................................................................................13
How to install optional accessories ....................................................................................13
Operation..............................................................................................................................................14
Configuration Instructions..............................................................................................................14
How to set up the reverse mode ........................................................................................14
How to set up the tool as a fixtured tool .............................................................................14
Operating Instructions ...................................................................................................................14
Starting the tool ..................................................................................................................14
How to reverse the rotation ................................................................................................14
Tightening status and LED reporting..................................................................................15
Service..................................................................................................................................................16
Maintenance Instructions ..............................................................................................................16
Instructions for transducerized tools ..................................................................................16
Read before maintenance..................................................................................................16
Preventive Maintenance.....................................................................................................16
Upgrading tools ..................................................................................................................16
Checking before putting back into service.....................................................................................17
Recommissionning ........................................................................................................................17

EN Product Information
10/2020 3 / 20
Product Information
General Information
WARNING Risk of Property Damage or Severe Injury
Ensure that you read, understand and follow all instructions before operating the tool. Failure to follow all the
instructions may result in electric shock, fire, property damage and/or severe bodily injury.
►Read all Safety Information delivered together with the different parts of the system.
►Read all Product Instructions for installation, operation and maintenance of the different parts of the system.
►Read all locally legislated safety regulations regarding the system and parts thereof.
►Save all Safety Information and instructions for future reference.
Safety Signal Words
The safety signal words Danger, Warning, Caution, and Notice have the following meanings:
DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious in-
jury.
WARNING WARNING indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
CAUTION CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE NOTICE is used to address practices not related to personal injury.
Warranty
• Product warranty will expire 12 months after the product is first taken into use, but will in any case expire at the
latest 13 months after delivery.
• Normal wear and tear on parts is not included within the warranty.
• Normal wear and tear is that which requires a part change or other adjustment/overhaul during standard tools
maintenance typical for that period (expressed in time, operation hours or otherwise).
• The product warranty relies on the correct use, maintenance, and repair of the tool and its component parts.
• Damage to parts that occurs as a result of inadequate maintenance or performed by parties other than Desoutter
or their Certified Service Partners during the warranty period is not covered by the warranty.
• To avoid damage or destruction of tool parts, service the tool according to the recommended maintenance sched-
ules and follow the correct instructions.
• Warranty repairs are only performed in Desoutter workshops or by Certified Service Partners.
Desoutter offers extended warranty and state of the art preventive maintenance through its Tool Care contracts. For
further information contact your local Service representative.
For electrical motors:
• Warranty will only apply when the electric motor has not been opened.
Website
Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Desoutter
website.
Please visit: www.desouttertools.com.
Information about spare parts
Exploded views and spare parts lists are available in Service Link at www.desouttertools.com.

Product Information EN
4 / 20 10/2020
Dimensions (mm)
EAD
ØA ØB D L
20-1300 46 37 25 481
32-900 46 37 25 481
50-900 46 37 28 531
70-800 58 43 32 544
70-800 Sq.1/2 58 43 32 544
80-650 58 48 40 567
105-500 58 48 40 567
h H ØC
20-1300 12 45.5 28
32-900 12 45.5 28
50-900 12 51.1 35
70-800 12 56.7 40
70-800 Sq.1/2 17 62 40
80-650 17.5 60.4 45
105-500 17.5 60.4 45
ØA ØB M L
160-430 66 55 52 650
200-370 66 55 52 673
280-260 66 55 52 673
280-370 76 55 66 681
440-250 76 67 66 735
660-160 76 67 66 774

EN Product Information
10/2020 5 / 20
C E F G
160-430 50 51 6 (0 to 0.012) M6
200-370 62 63 6 (0 to 0.012) M6
280-260 62 63 6 (0 to 0.012) M6
280-370 62 63 6 (0 to 0.012) M6
440-250 75 76 8 (0 to 0.015) M8
660-160 106 107 10 (0 to 0.015) M10
K h H I J
160-430 2.5 17 65 37° 61
200-370 3.5 23 85 40° 73
280-260 3.5 23 85 40° 73
280-370 3.5 23 85 40° 73
440-250 3.5 24 91 37° 90
60-160 5 33 110 40° 121
EAD-HAD
ØA ØB C D
50-900 46 37 36.5 28
70-700 58 41 52 35
105-500 58 48 46 40
H L
50-900 61.6 532
70-700 90 550
105-500 88 567
ØA ØB C E

Product Information EN
6 / 20 10/2020
160-430 66 55 46 51.5
H L ØM
160-430 91 650 52
CAD files
For information about the dimensions of a product, see the Dimensional drawings archive:
https://www.desouttertools.com/resource-centre
Overview
General overview
EAD / EAD-HAD are electric angle-head nutrunners powered by one of the following Desoutter controllers.
- CVI3 Essential
- CVI3 Function
- CVI3 Vision
- TWINCVI3
They are hand-held by the operator.
They also can be used as fixtured tools and installed on a frame in the workstation.
Contact your Desoutter representative to get more information and support.
They received the tightening process to run from the controller.
Tools settings such as trigger management, LED management, run reverse mode, etc... can be set up with CVI CON-
FIG.
Change the orientation of the angle head by mounting an eFLEX cable.
The following models are equipped with eCompass feature.
- EAD20-1300
- EAD32-900
- EAD50-900
- EAD70-800
- EAD70-800 SQ1/2
- EAD80-650
- EAD105-500
- EAD160-430
- EAD200-370
This feature is available for tools equipped with a gyroscope.
This feature is used to compensate any movement of the operator that might add or remove angle in the assembly.
Moreover, an angle range (tool angle limits) is defined to stop the tightening if the operator movement is outside this
range.
This feature is programmable with CVI CONFIG software.
The ePOD model (ePOD2 Compass) must be connected to the controller.
Product description

EN Product Information
10/2020 7 / 20
1 Output drive
2 Trigger
3 Reverse button
4 Reporting LEDs
Technical data
Voltage
3 ~ 230 V
Power consumption
Model W
EAD20-1300 55
EAD32-900 55
EAD50-900 100
EAD50-900-HAD 100
EAD70-700-HAD 100
EAD70-800 100
EAD70-800 SQ 1/2 100
EAD80-650 100
EAD105-500 100
EAD105-500-HAD 100
EAD160-430 160
EAD160-430-HAD 160
EAD200-370 160
EAD280-260 160
EAD280-370 170
EAD440-250 170
EAD660-160 170
Output drive
Model Type
EAD20-1300 Sq. 3/8"
EAD32-900 Sq. 3/8"
EAD50-900 Sq. 3/8"
EAD50-900-HAD Hold and Drive *
EAD70-700-HAD Hold and Drive *
EAD70-800 Sq. 3/8"
EAD70-800 SQ 1/2 Sq. 1/2"
EAD80-650 Sq. 1/2"
EAD105-500 Sq. 1/2"
EAD105-500-HAD Hold and Drive *
EAD160-430 Sq. 1/2"
EAD160-430-HAD Hold and Drive *
EAD200-370 Sq. 3/4"
EAD280-260 Sq. 3/4"
EAD280-370 Sq. 3/4"
EAD440-250 Sq. 3/4"
EAD660-160 Sq. 1"
*: socket and bit not supplied

Product Information EN
8 / 20 10/2020
Torque range (Nm)
Model Min. / Nominal / Max.
EAD20-1300 3 / 18 / 20
EAD32-900 5 / 30 / 32
EAD50-900 8 / 45 / 50
EAD50-900-HAD 8 / 45 / 50
EAD70-700-HAD 12 / 65 / 70
EAD70-800 12 / 65 / 70
EAD70-800 SQ 1/2 12 / 65 / 70
EAD80-650 15 / 75 / 80
EAD105-500 20 / 90 / 105
EAD105-500-HAD 20 / 90 / 105
EAD160-430 35 / 150 / 160
EAD160-430-HAD 35 / 150 / 160
EAD200-370 60 / 170 / 200
EAD280-260 60 / 250 / 280
EAD280-370 60 / 250 / 280
EAD440-250 100 / 400 / 440
EAD660-160 100 / 600 / 660
Torque range (ft.lb)
Model Min. / Nominal / Max.
EAD20-1300 2.2 / 13.3 / 14.8
EAD32-900 3.7 / 22.1 / 23.6
EAD50-900 5.9 / 33.2 / 40.6
EAD50-900-HAD 5.9 / 33.2 / 40.6
EAD70-700-HAD 8.8 / 47.9 / 51.6
EAD70-800 8.8 / 47.9 / 51.6
EAD70-800 SQ 1/2 8.8 / 47.9 / 51.6
EAD80-650 11.1 / 55.3 / 59.0
EAD105-500 14.8 / 66.4 / 77.4
EAD105-500-HAD 14.8 / 66.4 / 77.4
EAD160-430 26 / 111 / 118
EAD160-430-HAD 26 / 111 / 118
EAD200-370 44 / 125 / 148
EAD280-260 44 / 184 / 207
EAD280-370 44 / 184 / 207
EAD440-250 74 / 295 / 325
EAD660-160 74 / 443 / 487
Rated speed (rpm)
Model rpm
EAD20-1300 1300
EAD32-900 900
EAD50-900 900
EAD50-900-HAD 900
EAD70-700-HAD 700
EAD70-800 800
EAD70-800 SQ 1/2 800

EN Product Information
10/2020 9 / 20
Model rpm
EAD80-650 650
EAD105-500 500
EAD105-500-HAD 500
EAD160-430 430
EAD160-430-HAD 430
EAD200-370 370
EAD280-260 260
EAD280-370 370
EAD440-250 250
EAD660-160 160
Weight
Model kg lb
EAD20-1300 1.55 3.41
EAD32-900 1.55 3.41
EAD50-900 1.95 4.30
EAD50-900-HAD 1.80 3.96
EAD70-700-HAD 2.00 4.40
EAD70-800 2.15 4.74
EAD70-800 SQ 1/2 2.15 4.74
EAD80-650 2.55 5.62
EAD105-500 2.55 5.62
EAD105-500-HAD 2.40 5.29
EAD160-430 4.45 9.81
EAD160-430-HAD 4.3 9.5
EAD200-370 5.25 11.57
EAD280-260 5.25 11.57
EAD280-370 6.35 13.99
EAD440-250 8.65 19.07
EAD660-160 11.25 24.80
Storage and use conditions
Storage temperature -20 to +70 °C (-4 to +158 F)
Operating temperature 0 to 45 °C (32 to 113 F)
Storage humidity 0-95 % RH (non-condensing)
Operating humidity 0-90 % RH (non-condensing)
Altitude up to 2000 m (6562 feet)
Usable in Pollution degree 2 environment
Indoor use only
Accessories
Optional accessories
Barcode reader and headlight 6158121380
Headlight 6158121390
Trigger locker 6153978420

Product Information EN
10 / 20 10/2020
Front trigger (mechanical) for EAD20 to EAD105
Warning: this trigger must be mounted on tool by authorized
Desoutter technician only.
6153985300
Front trigger (electric) for EAD20 to EAD32 6159110135
Front trigger (electric) for EAD50 to EAD105 6159110125
Suspension bail (up to EAD105 / EID75) 6153974130
Suspension bail (for EAD160-200-280-660 / EID120) 6155710720
Protective cover for EAD20/EAD32 6155732070
Protective cover for EAD50 6155732080
Protective cover for EAD70 6155732090
Protective cover for EAD80/EAD105 6155732100
Handle lever 6153978310
eFLEX tool cable
Length (m) Length (ft) Part number
2.5 8.20 6159176310
5 16.0 6159176320
Telescopic modules
Telescopic module AHE5 - 1/2" 6153980760
Telescopic module AHE6 - 3/4" 6153980770
Telescopic module AHE7 - 3/4" 6153980780
Telescopic module AHE8 - 1" 6153981610
Where-used list
EAD160-430 AHE5 - 1/2" - - -
EAD280-260 - AHE6 - 3/4" - -
EAD280-370 - AHE6 - 3/4" - -
EAD440-250 - - AHE7 - 3/4" -
EAD660-160 - - - AHE8 - 1"
Required accessories
Tool cables
Length (m) Length (ft) Part number
2.5 8.20 6159176010
5 16.0 6159176020
10 32.8 6159176040
15 49.2 6159176050

EN Product Information
10/2020 11 / 20
Tool extension cables
Length (m) Length (ft) Part number
8 26.2 6159175810
16 52.5 6159175840
32 105 6159175870
50 164 6159175890
Service Overview
Maintenance program
Please consult us on the Tool Care program that includes production support and maintenance solutions.
Spare parts
Exploded views and spare parts lists are available at https://www.desouttertools.com/resource-centre.
The use of spare parts other than those originally supplied by the manufacturer may result in a drop in performance
or in increased maintenance and level of vibration and in the full cancellation of the manufacturer’s liability.

Installation EN
12 / 20 10/2020
Installation
Installation Instructions
How to clamp the tool
Whether the tool is handled by an operator with a torque arm or embedded in a robot with high dynamics, it is
advised to select two clamping locations instead of one.
Before selecting where to clamp the tool, take into account the following instructions.
From EAD20-1300 to EAD105-500
From EAD160-430 to EAD660-160
Dedicated clamping area for torque reaction.
Preferred clamping area.
This clamping area can be used as a secondary clamping. Do not use this area for torque reaction.
Prohibited clamping area.
Clamping on the motor shall always be selected as the very last option and the operation shall be done with extra
care.

EN Installation
10/2020 13 / 20
Connecting the tool to the controller
1. Connect the cable to the tool.
TOP TOP C
A
Plug the cable with help of TOP indication.
Tighten the nut. No need to tighten it too much.
The locking system will prevent any loosening.
To enable the loosening of the cable, actuate the locking trigger at the bottom of the handle.
2. Connect the cable to the controller.
1
2
Mounting the trigger locker
Follow the instructions below.
How to install optional accessories
Refer to the user manual dedicated to the accessory available at https://www.desouttertools.com/resource-centre.

Operation EN
14 / 20 10/2020
Operation
Configuration Instructions
How to set up the reverse mode
Go to CVI CONFIG to set up the run reverse settings.
Refer to the Configuration Manual of CVI CONFIG (printed matter: 6159925470) available at https://
www.desouttertools.com/resource-centre.
How to set up the tool as a fixtured tool
Desoutter should not be held responsible for any injury, accident or damage which may be the consequence of an in-
correct installation, modification or start-up, or a use out of the intended use of Desoutter products, by the customer
or a third party.
This tool can be used as a fixtured tool installed on a frame in the workstation.
WARNING Risk Of Electric Shock
The frame where tools are clamped must be earthed.
In this case, the tool trigger must be locked by the optional accessory Trigger locker.
The tightening operation is then triggered by an external start.
The external start can be a remote pushbutton or a PLC output signal sent to the controller.
Operating Instructions
Starting the tool
WARNING Risk Of Injury
As the reaction force increases in proportion to the tightening torque, there is a risk of severe bodily injury of the
operator as a result of unexpected behavior of the tool.
►Make sure that the tool is in perfect working order and the system is programmed correctly.
Fit the tool with a suitable socket.
Select the appropriate program on the controller.
Hold the tool by means of the handle and apply to the fastener to be tightened.
Press the trigger to start the tool.
How to reverse the rotation
1 Run reverse button
Press this button.
Red and green LEDs are blinking alternatively.
Apply the tool to the fastener and press the trigger.

EN Operation
10/2020 15 / 20
Tightening status and LED reporting
Reporting LEDs
1 Red
2 Green
3 Yellow
How to read the tightening report
LED color Description Action to do
Green Accept report None
Yellow Incomplete rundown Tighten again.
Yellow and red (orange) Reject report Loosen and tighten again.
Red Above max. limits Loosen, replace the fastener and tighten
again.

Service EN
16 / 20 10/2020
Service
Maintenance Instructions
Instructions for transducerized tools
• Do not damage the wires when pulling out the connectors.
• Do not pull out the torque transducer wires.
• Ensure that wires are not crushed.
Read before maintenance
WARNING Connection Hazard
The tool can start unexpectedly and cause severe bodily injury.
►Prior to any maintenance task, disconnect the tool.
Maintenance should be performed by qualified personnel only.
Follow standard engineering practices and refer to exploded views for disassembling and reassembling the different
parts of the system.
Take into account the following instructions given in the exploded views.
Be cautious: when reassembling, tighten the right direction.
Left hand thread
Right hand thread
When reassembling:
Apply the recommended glue.
Tighten to the required torque.
Lubricate with the required grease or oil. Do not apply too much grease on gears or bearings; a thin coat shall be
sufficient.
Preventive Maintenance
Recommendations
Overhaul and preventive maintenance are recommended at regular intervals once per year or after a maximum num-
ber of tightenings (refer to the table below) depending on which occurs sooner.
Maintenance frequency
500,000 tightenings
Heavy duty
Heavy duty use can require more frequent overhaul and Preventive Maintenance intervals. Please contact your local
Desoutter Service team to get a customized maintenance plan.
Upgrading tools
To upgrade tools, it is necessary to have:
• an ACCESS KEY USB stick set with the right profile.
This USB stick is provided by your CVIKEY manager.
• CVIMONITOR software
Contact your Desoutter representative to get more information and support.

EN Service
10/2020 17 / 20
Checking before putting back into service
Prior to putting the equipment back into service, check that its main settings have not been modified and that the
safety devices work properly.
Recommissionning
Prior to putting the different parts of the system back into service, check that the main settings have been correctly
set up and that the safety devices work properly.

Original instructions
Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric
and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including
Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry.
Desoutter offers a comprehensive range of Solutions -tools, service and projects- to meet the specific
demands of local and global customers in over 170 countries.
The company designs, develops and delivers innovative quality industrial tool solutions, including Air and
Electric Screwdrivers, Advanced Assembly Tools, Advanced Drilling Units, Air Motors and Torque
Measurement Systems.
Find more on www.desouttertools.com
More Than Productivity