devinci E-TROY User manual
WE MAKE RIDERS
TECHNICAL MANUAL
CHICOUTIMI, QUÉBEC
E-TROY 2023+
ALL IT TAKES IS ONE RIDE
ALL IT TAKES IS ONE RIDE
PLEASE READ BEFORE USING YOUR BIKE
•
•
•
•
•
•
•
•
Perform maintenance of the battery as mentioned in the Technical Manual.
PLEASE READ BEFORE USING YOUR BIKE
Even if you have already piloted a bike for years, it is important to be aware of the information contained in the
PLEASE READ BEFORE USING YOUR BIKE
•
•
•
• Only your retailer has the know-how and the proper equipment to maintain your PAB.
• If you have any question about your PAB, please ask for assistance from your retailer.
NOTE Failure to follow the instructions below may damage the battery and require you to purchase
a new battery kit.
•
•
•
•
•
•
•
• C C
•
•
YOUR AUTHORIZED DEVINCI RETAILER
ABOUT OUR MANUALS
Our user manuals meet ISO 4210-10TS, EN 15194 et EN 14766 standards.
PLEASE READ BEFORE USING YOUR BIKE
36
28
12
8
TABLE OF
CONTENTS
TABLE OF CONTENTS
SERVICE KIT
DEVINCI'S RIDE IN PEACE WARRANTY
CABLE ROUTING
FRAME: TECHNICAL SPECIFICATIONS
FRAME
TECHNICAL SPECIFICATIONS
10
FRAME
Technical
specications
SIZE AVAILABLE
S | M | L | XL
STEERING COLUMN DIMENSIONS
1. ZS44 1-1/8"Zerostack
2. ZS56 1.5"Zerostack
CRANKSET
3. Mid-Drive Motor
ELECTRIC ASSIST BOSCH
Bosch CX BES3
Bosch BES3
Bosch BES3 625
Slim
MACV24007
SEAT TUBE AND SEAT CLAMP
9. 31.6 mm
10. 34.9 mm
Oui | Entièrement interne
BRAKES
Montage sur support 200 mm direct
220 mm
ACCESSOIRIES
OUI
COMPATIBILITY INFO (BASED ON SIZE MEDIUM)
E-TROY | FORK 160 MM | TRAVEL 150MM
15. 160 mm 30%
16. 571 44
750 720
66-622 66-584
FRAME → TECHNICAL SPECIFICATION_INFORMATION
11
1
9
2
4
3
8
14
7
15
16
FRAME → TECHNICAL SPECIFICATION_PLAN
CABLE
ROUTING
14
STEP 1
STEP 3 STEP 2
STEP 1
CABLE ROUTING_SPEED SENSOR CABLE → PLAN
15
SPEED SENSOR CABLE
CABLE
ROUTING
STEP 1 |
STEP 2 |
STEP 3 |
Make sure that the cables intended to be connected to the motor do not interfere with its insertion into the shell by storing
them against the upper wall.
CABLE ROUTING_SPEED SENSOR CABLE → STEPS
16
STEP 1
STEP 2
STEP 4
STEP 3
STEP 4
CABLE ROUTING_REAR BRAKE HOUSING → PLAN
17
REAR BRAKE HOUSING
Fix the rear brake housing and the speed sensor cable to the base in the place provided for this purpose using small zip ties.
CABLE
ROUTING
STEP 1 |
STEP 2 |
STEP 3 |
STEP 4 |
CABLE ROUTING_REAR BRAKE HOUSING → STEPS
18
STEP 1
STEP 5
STEP 2
STEP 3
STEP 4
STEP 5
CABLE ROUTING_REAR DERAILLEUR HOUSING → PLAN
19CABLE ROUTING_REAR DERAILLEUR HOUSING → STEPS
REAR DERAILLEUR HOUSING
Make sure that the housing and the cables inserted previously in the down tube do not cross each other.
Tip → Slightly bend the tip of the housing to facilitate its insertion into the base.
PASSAGE
DE GAINES
STEP 1 |
STEP 2 |
STEP 3 |
STEP 4 |
STEP 5 |
Fix the rear speed housing to the base in the place provided for this purpose using small zip ties.
20
STEP 1
STEP 3
STEP 2
STEP 1
CABLE ROUTING_SEAT POST HOUSING → PLAN
Other manuals for E-TROY
1
Other devinci Bicycle manuals
