Digicom 2G Lift Dialer User manual

8D5778 _ 2G Lift Dialer
8D5798 _ 2G Lift Dialer MetalBox
User’s Guide
7Dxxxx rev. 3.0 01/2016

PB
2G Lift Dialer Preface
I
2G Lift Dialer Preface
INDEX
PREFACE ......................................................................................................................................................... II
BACKUP BATTERY.......................................................................................................................................... II
DECLARATION CE OF CONFORMITY ........................................................................................................... II
SAFETY WARNINGS ...................................................................................................................................... III
1. INTRODUCTION............................................................................................................................................1.1
1.1. TECHNICAL FEATURES .......................................................................................................................1.1
1.2. SYSTEM DESCRIPTION AND PACKAGE CONTENT .......................................................................... 1.2
2. INSTALLATION..............................................................................................................................................2.1
2.1. SUGGESTIONS FOR SECURITY..........................................................................................................2.1
2.2. INSTALLATION ARCHITECTURES ....................................................................................................... 2.1
2.3. TESTS DURING THE INSTALLATION................................................................................................... 2.8
2.4. BEFORE POWERING LIFT DIALER ON ............................................................................................... 2.9
2.5. VOICE BOX CONNECTION................................................................................................................. 2.10
2.6. 2G LIFT DIALER PINOUT.................................................................................................................... 2.11
2.7. LIFT DIALER TOPOGRAPHY.............................................................................................................. 2.11
2.8. VOICE BOX - CAR PINOUT (CODE 8D5804) ..................................................................................... 2.12
2.9. VOICE BOX - CAR TOPOGRAPHY (CODE 8D5804) ......................................................................... 2.12
2.10.VOICE BOX - TOP / PIT PINOUT (CODE 8D5780)............................................................................ 2.13
2.11. VOICE BOX - TOP / PIT TOPOGRAPHY (CODE 8D5780) ................................................................ 2.13
2.12.VOICE BOX BUTTON PINOUT (CODE 8D5810) ............................................................................... 2.14
2.13.VOICE BOX BUTTON TOPOGRAPHY (CODE 8D5810) ................................................................... 2.14
2.14.LIFT DIALER: LED INDICATORS ....................................................................................................... 2.15
2.15.VOICE BOX: LED INDICATORS......................................................................................................... 2.15
2.16.BACKUP BATTERY (CODE 7D1991) ................................................................................................. 2.15
2.17.RESET BUTTON.................................................................................................................................2.16
3. CONFIGURATION ......................................................................................................................................... 3.1
3.1. CONFIGURATION VIA LOCAL PHONE................................................................................................. 3.1
3.2. CONFIGURATION VIA REMOTE PHONE ............................................................................................. 3.1
3.3. CONFIGURATION VIA SMS .................................................................................................................. 3.2
3.4. CONFIGURATION TABLE...................................................................................................................... 3.2
3.5. CONFIGURATION EXAMPLES .............................................................................................................3.7
3.6. MULTI-COMMANDS VIA SINGLE SMS................................................................................................. 3.7
3.7. RECORDING THE ALARM MESSAGE (COMMAND 40#) .................................................................... 3.7
3.8. PLAYING THE ALARM MESSAGE (COMMAND 41#)........................................................................... 3.7
3.9. MANAGING THE ALARM CALL.............................................................................................................3.8
3.10.RESETTING THE ALARM (COMMAND 19) ......................................................................................... 3.8
3.11. RESTORING THE FACTORY CONFIGURATION (COMMAND *99#).................................................. 3.8
3.12.RESTORING THE COMPLETE FACTORY CONFIGURATION (COMMAND *9900#)......................... 3.8
3.13.CHANGING THE LANGUAGE (COMMAND 45*XX#) .......................................................................... 3.9
3.14.ADjUSTING SPEAKER VOLUME AND MICROPHONE GAIN ............................................................ 3.9
3.15.ACTIVATION OF SPEAKERPHONE IN CAR IN INCOMING CALLS ................................................... 3.9
3.16.ACTIVATING THE INTERCOM FUNCTION (COMMAND *1 OR *2 OR *3) ....................................... 3.10
3.17.RELAY 1 AND 2: MANAGEMENT FOR GATE OPENING (COMMANDS 81# AND 82#) ................... 3.10
3.18.RELAY1: BELL MANAGEMENT (COMMAND 84T#) .......................................................................... 3.11
3.19.RELAY 2: ITALIAN LAW 13 MANAGEMENT (COMMAND 831#) ....................................................... 3.11
3.20.ALARM FILTERING............................................................................................................................. 3.11

II
2G Lift Dialer Preface
III
2G Lift Dialer Preface
All rights reserved; no part of this publication may be reproduced, stored in a retrieval system, or trasmitted in any form or by any means, electronic, otherwise,
without the prior written permission of Digicom S.p.A. The contents of this booklet may be modified without notice. Every possible care has been taken in testing
and putting together all the documentation contained in this booklet, however Digicom can not take any responsability brought by the use of this booklet.
PREFACE
In order to guarantee your safety and a correct functioning, be sure to follow these safety warnings. The whole set (with cables
included) must be installed in a place lacking of or distant from:
• Dust,humidity,hightemperaturesanddirectexposuretosunlight.
• Heatirradiatingobjects,whichmaydamageyourdeviceorcauseanyotherproblem.
• Objectsproducingahighelectromagneticeld(Hi-Fispeakers,etc.).
• Corrosiveliquidsorchemicalsubstances.
ENVIRONMENTAL CONDITIONS
Environmenttemperature:from-20°Cto+55°C Relativehumidity:from20to80%n.c.
Any sudden change in temperature and humidity must be avoided.
Use a soft dry cloth and avoid any solvents or abrasive materials.
Cautionagainstshocksorvibrations.
BACKUP BATTERY
WARNING: this device can be equipped with a Li-ion Polymer backup battery.
Thisbatterymaygetburnt,explodeorcauseseriousburnings.DONOTdisassemble,weld,burnorthrowthebatteryintowater.
Keepoutofchildren.Replaceonlywithasamemodelbatteryandreservetheoperationonlytoqualiedstaff.Theuseofadifferent
batterymaycauserehazardorexplosions.Italianlawsconsiderbatteriesasdangerousurbanwastethatmustbedisposed
accordingtothelawprovisionsinforce(ItalianDPR915/82andlocalprovisions).
The backup battery is excluded from warranty.
DECLARATION CE OF CONFORMITY
We,DigicomS.p.A.registeredofceat:ViaVolta39–21010CardanoalCampo(Varese–Italy)declareunderoursoleresponsability
that the products with name 2G Lift Dialer and 2G Lift Dialer MetalBoxType:LiftAlarmSystem, Category: Device forthe
InformationTechnologysatisesthebasicrequirementofthebelowindicatedDirective:
- 1999/5/EC 9th March 1999, R&TTE (concerning radio equipment and telecommunication terminal equipment and the
acknowledgmentoftheirconformity)LawDecree9thMay2001,n.269,(G.U.n.156of7-7-2001).
 AsindicatedinconformitywiththerequirementsoffollowingReferenceStandardsorofotherregulationsdocuments:
 EN301489-1
 EN301489-7
 EN301511
 EN300220
 EN55022
 EN55024
 EN50385
 EN60950-1+A11+A1+A12

II
2G Lift Dialer Preface
III
2G Lift Dialer Preface
SAFETY WARNINGS
Readtheseinstructionsandnormscarefullybeforepoweringthedevice.Violationofsuchnormsmaybeillegalandcausehazard
situations.
Foranyofthedescribedsituationspleaserefertothespecicinstructionsandnorms.
Thedeviceisalowpowerradiotransmitterandreceiver.WhenitisON,itsendsandreceivesradiofrequency(RF)signals.
Thedeviceproducesmagneticelds.Donotplaceitnexttomagneticsupportssuchasoppydisks,tapes,etc.
Operating your device close to other electrical and electronic equipment - such as a television, phone, radio or a personal
computer-maycauseinterferences.
INTERFERENCES
Thedevice,likeallotherwirelessdevices,issubjecttointerferencesthatmayreduceitsperformances.
ROAD SAFETY
Donotuseyourdevicewhiledriving.Incaseofuseoncars,youmustcheckthattheelectronicequipmentisshieldedagainstRF
signals. Do not place the device in the air bag deployment area.
AIRCRAFT SAFETY
Switch off your device when on board aircrafts by disconnecting the power supply and deactivating the internal backup battery.
UsingGSMdevicesonaircraftsisillegal.
HOSPITAL SAFETY
Donotusethedevicenearhealthequipment,especiallypacemakersandhearingaids,inordertoavoidpotentialinterferences.
Takecarewhenutilizingthedeviceinsidehospitalsandmedicalcentres,whichmakeuseofequipmentthatcouldbesensitiveto
externalRFsignals.Switchitoffwhenuseisexpresslyforbidden.
EXPLOSIVE MATERIALS
Donotusethedeviceinrefuellingpoints,nearfuelorchemicals.Donotusethedevicewhereblastingisinprogress.Observe
restrictions and follow any specific regulation or instruction.
INSTRUCTIONS FOR USE
Do not use the device in direct contact with the human body and do not touch the antenna if not strictly necessary.
Useapprovedaccessoriesonly.Consultdocumentationregardinganypossibledeviceconnectedtothedevice.Donotconnect
incompatible products.
INFORMATION TO USERS
accordingtoArt.26"InformationtoUsers"-Legislative Decree 14 March 2014, n. 49 "Actuation of the Directive 2012/19/UE on the
waste of electrical and electronic devices (RAEE)."
The symbol of a crossed waste container marked on the apparatus or on its package indicates that at the end of its useful life
the product must be collected separately from other waste materials.
The user must therefore take the apparatus which has reached the end of its useful life to appropriate separate collection
centresforelectronicandelectro-technicalwastematerials,ordeliveritbacktotheresellerwhenpurchasinganewapparatus
ofanequivalenttypeforadomesticunit,givingonepieceinforonepieceout,accordingtoArt.11,paragraph3oftheabove
mentioned Legislative Decree.
Furthermore,asperArt.11,paragraph3oftheabovementionedLegislativeDecreeitispossible,inthesalepoint,thefreeinsertion
ofrecyclablematerialsintoappropriatereceptacle,withoutanypurchasingobligationfortheverysmallsizeRAEE,comingfromdomesticunits.
Suitableseparatewastecollectionforthensendingthecast-offapparatusforrecycling,treatmentandenvironmentallyfriendlydisposal,
contributes towards preventing any possible negative effects on the environment and on health and encourages recycling of the materials
the apparatus is made up of.
Unauthorised disposal of the product by the user will lead to payment of the administrative sanctions in force in the country where it is put
on the market.

PB
2G Lift Dialer Introduction
1.1
2G Lift Dialer Introduction
1. INTRODUCTION
Thanks for purchasing a Digicom product!
2G Lift Dialer and Voice Box constitute a bidirectional Emergency phone for lifts system, compliant to EN81.28,
EN81.1, EN81.2 regulations.
The Emergency phone allows the users blocked in
a lift cabin to send an alarm via GSM to a Service
Center or to the authorized Technical people.
In the lift cabin the emergency call is activated
by pressing the alarm button connected to the
VoiceBox terminal board.
The people in the lift cabin will be reassured with
a comfort message and a yellow bright light will
turn on to indicate that the alarm has been sent.
At the same time the Emergency phone calls the
Service Center or the technical people (these
numbers must be set by the lift manager installer).
When the Emergency phone establishes the voice
communication with the Service Center, the people
in the cabin will see that a green light turns on indicating that the alarm has been received and they will be able to have
a speakerphone conversation with the technical people in order to receive assistance.
1.1. TECHNICAL FEATURES
• GSMmodule:GSM/GPRSQuad-Band850/900/1800/1900MHz
• Outputpower:
- Class4(2W/33dBmmaximumnominal)forGSMat850/900MHz
- Class1(1W/30dBmmaximumnominal)forDCSat1800/1900MHz
• VoiceInterface:FXSonscrewterminalboard
• Voicecall
• Datacall
• RS232serialinterfaceonRJ45femaleconnectorforDATAconnections
• GPRSclass10
• GSMspeedupto9600bps
• Built-inTCP/IPStack
• Ledforindicationofdevicestatus
• KitforDINmounting(forcode8D5778only)
• Metalcaseforwallmounting(forcode8D5798only)
• SMAconnectorforantenna
• USBportforrmwareupgrade
• Resetbutton(Restart–Alarmend)
• 2Relays(max60Vdc/Vac–2A)
• Power:12-24Vdc-1Amin
• IntegratedrechargeableBackupbattery(forcode8D5798only)
• CEMarkandRohscompliant
• EN81-28,EN81-1,EN81-2

1.2
2G Lift Dialer Introduction
1.3
2G Lift Dialer Introduction
1.2. SYSTEM DESCRIPTION AND PACKAGE CONTENT
Digicom Emergency phone for lift system is composed by two main elements:
2G Lift Dialer RemotealarmdialerwithnativeintegratedGSM/GPRSmodule.
Voice Box Speakerphone unit with integrated microphone and speaker.
Voice Box speakerphone unit is connected to 2G Lift Dialer Emergency phone with 2 wires only.
Foragoodaudioqualitywesuggesttheuseofatwistedpairfortheconnection.
Otherwiseitispossible:
- tousetwounusedwiresalreadypresentinthecabincable;
- tousethetwowiresalreadypresentthatareusedforthebell,afterhavingmodiedthesystemasdescribedinparagraph
RELAYS1:BELLMANAGEMENT.
Inthesecasestheaudioqualitycouldnotbesogood.
2G Lift Dialerremotealarmdialerisavailableinthefollowingversions:
Emergency phone on DIN guide support (code 8D5778)
Suggested for installations inside the frame controller.
It is supplied with:
• GSMantennawithmagneticbaseand3meterscable.
Accessories that can be purchased separately:
• externalpowersupply230Vac/12Vdc–1000mA(code8D6065);
• rechargeablebatteryLi-Pol3,7Vdc–3800mAh(code7D1991).
Emergency phone integrated in metal box (code 8D5798)
Suggested for installations in the machine room.
It is supplied with:
• GSMantennawithmagneticbaseand3meterscable;
• externalpowersupply230Vac/12Vdc–1000mA;
• rechargeableinternalbatteryLi-Pol3,7Vdc–3800mAh;
• screwsforwallmounting.

1.2
2G Lift Dialer Introduction
1.3
2G Lift Dialer Introduction
Voice Box speakerphone unit,only19mmthickandpowereddirectlyby2GLiftDialerEmergencyphone,isavailable
inthefollowingversions:
Voice Box Top/Pit (code 8D5780)
FortheinstallationontheTopofthecabinandinPitwithmicrophoneandspeaker.
Equipped with:
• integratedmicrophoneandspeaker;
• integratedalarmbutton;
• resetalarmbutton;
• integratedlightsignals.
Voice Box Car (cod. 8D5804)
Fortheinstallationincarbehindthecaroperatingpanel.
Equipped with:
• integratedmicrophoneandspeaker;
• integratedlightsignals;
• pinonterminalboardtoconnecttheN.O.orN.C.buttonsaccessibleinthecabin;
• pinonterminalboardtoconnecttheN.O.orN.C.buttonsaccessiblebytechnicalpeopleon
theTopofthecabinandinPit;
• pinonterminalboardtoconnecttheexternallightsignalsofalarmsentandalarmreceived.
Voice Box Button (code 8D5810)
FortheinstallationontheTopofthecabinandinPitwithoutmicrophoneandspeaker.
Equipped with:
• alarmbuttononly.
This model must be connected to VoiceBox Car and it won't be connected to 2G Lift Dialer
Emergency phone.

2.1
2G Lift Dialer Installation
2. INSTALLATION
Here below the procedure for the installation and configuration of 2G Lift Dialer and Voice Box together.
This user's manual can be used for the following models of 2G Lift Dialer:
• (code8D5778) Emergency phone on DIN rail support: 2G Lift Dialer
• (code8D5798) Emergency phone integrated in metal box: 2G Lift Dialer Metal Box
The user's manual also refers to the following models:
• (code8D5780) Speakerphone unit: Voice Box Top/Pit or Under Car
• (code8D5804) Speakerphone unit : Voice Box Car
• (code8D5810) Button: Voice Box Button
2.1. SuggeStionS for Security
Before installing Digicom Emergency phone, please read this user's manual.
Pay attention to your security during the installation of Emergency phone for Lifts system.
We suggest to operate in an open lift shaft with proper equipment like safety harness.
We also suggest to disconnect power supply before operating near high voltage like for example in an lift motor room.
2.2. inStallation architectureS
As previously described, speakerphone Voice Box is connected to 2G Lift Dialer Emergency phone with 2 wires only.
For a good audio quality we suggest the use of a twisted pair for the connection.
Otherwise it is possible:
- to use two unused wires already present in the cabin cable;
- to use the two wires already present that are used for the bell, after having modified the system as described in paragraph
RELAY1: BELL MANAGEMENT.
In these cases the audio quality could not be so good.
The following installation architectures suggested by Digicom can be used both for new systems and for modernizations
independently by the Digicom Emergency phone card used and by its allocation, the possible installations can be:
• BASE INSTALLATION(seeinstallationschemeinthenextpages)
Connection of a Voice Box in car to 2G Lift Dialer, placed directly behind the car operating panel. Then 3 external
buttons will be connected to Voice Box Car:
• Car=1 Voice Box Car placed directly behind the car operating panel with the external button.
• Top/Pit=2externalbuttoncanbeplacedontheTopand/orPit.FortheconnectionofTopand/orPitbuttonsitis
possible to use the model Voice Box Button.
• COMPLETE INSTALLATION (seeinstallationschemeinthenextpages)
This architecture connects a maximum of 3 speakerphone units to 1 2G Lift Dialer Emergency phone:
• Car=1 Voice Box Car placed directly behind the car operating panel with the external button.
• Top/Pit=2 Voice Box Top / Pit.
• MULTI LIFT INSTALLATION(seeinstallationschemeinthenextpages)
This architecture is similar to the Base Installation, but in this case the cabins can be 3 at maximum, then a total of
maximum 3 Voice Box Car:
• IneachCar=1 Voice Box Car placed directly behind the car operating panel with the external button.
• Top/Pit(ofeachcabin)=2externalbuttonscanbeplacedontheTopand/orPit.FortheconnectionofTopand/
or Pit buttons it is possible to use the model Voice Box Button.
Furthermore in all architectures it will be possible to connect a common phone to the 2G Lift Dialer for the intercom function
between the frame controller and the lift cabin. The same phone can be also used for the local configuration and for the
recording of the eventual alarm message.

2.2
2G Lift Dialer Installation
2G Lift Dialer
SIM
ANTENNA
3 4 5 6 2221
CONFIG
GSM
POWER
8D5810 Voice Box Button
8D5804 Voice Box Car
CAR
Phone for: - Configuration - Intercom
N.O. or N.C. External Alarm Button
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
1
11
2 3
7 8 9
PIT
11
TOP
4
4
4
11
8D5810 Voice Box Button
BASE INSTALLATION 1. Insert the SIM card; 2. Connect the antenna; 3. Connect the VoiceBox; 4. Switch-on the 2G Lift Dialer; 5. Check the Power Led is ON; 6. Check the GSM Led is
Blinking or ON;
7. Configure the 2G Lift Dialer. N.O. or N.C. Alarm Button
or
N.O. COM. N.C.
N.O. or N.C. Alarm Button
or
N.O. COM. N.C.
GND +Vdc (12-24Vdc - 1A min)
Pins can be crossed
Pins can be crossed
Pins can be crossed

2.3
2G Lift Dialer Installation
2G Lift Dialer
SIM
ANTENNA
3 4 5 6 2221
CONFIG
GSM
POWER
8D5810 Voice Box Button
8D5804 Voice Box Car
CAR
Phone for: - Configuration - Intercom
N.O. or N.C. External Alarm Button
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
1
11
2 3
7 8 9
PIT
11
TOP
4
4
4
11
8D5810 Voice Box Button
BASE INSTALLATION 1. Insert the SIM card; 2. Connect the antenna; 3. Connect the VoiceBox; 4. Switch-on the 2G Lift Dialer; 5. Check the Power Led is ON; 6. Check the GSM Led is
Blinking or ON;
7. Configure the 2G Lift Dialer. N.O. or N.C. Alarm Button
or
N.O. COM. N.C.
N.O. or N.C. Alarm Button
or
N.O. COM. N.C.
GND +Vdc (12-24Vdc - 1A min)
Pins can be crossed
Pins can be crossed
Pins can be crossed

2.4
2G Lift Dialer Installation
COMPLETE INSTALLATION 1. Insert the SIM card; 2. Connect the antenna; 3. Connect the VoiceBox; 4. Switch-on the 2G Lift Dialer; 5. Check the Power Led is ON; 6. Check the GSM Led is Blinking or ON; 7. Configure the 2G Lift Dialer.
2G Lift Dialer
SIM
ANTENNA
3 4 5 6 2221
CONFIG
GSM
POWER
CAR
8D5780 Voice Box Top Pit
Phone for: - Configuration - Intercom
N.O. or N.C. External Alarm Button
Jumper for top position
Jumper for pit position
No jumper for car position
8D5804 Voice Box Car
GND +Vdc (12-24Vdc - 1A min)
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
1
11
2 4
7 8 9
PIT
1 2
11
12
TOP
2
10 11
1
8D5780 Voice Box Top Pit
Pins can be crossed

2.5
2G Lift Dialer Installation
COMPLETE INSTALLATION 1. Insert the SIM card; 2. Connect the antenna; 3. Connect the VoiceBox; 4. Switch-on the 2G Lift Dialer; 5. Check the Power Led is ON; 6. Check the GSM Led is Blinking or ON; 7. Configure the 2G Lift Dialer.
2G Lift Dialer
SIM
ANTENNA
3 4 5 6 2221
CONFIG
GSM
POWER
CAR
8D5780 Voice Box Top Pit
Phone for: - Configuration - Intercom
N.O. or N.C. External Alarm Button
Jumper for top position
Jumper for pit position
No jumper for car position
8D5804 Voice Box Car
GND +Vdc (12-24Vdc - 1A min)
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
1
11
2 4
7 8 9
PIT
1 2
11
12
TOP
2
10 11
1
8D5780 Voice Box Top Pit
Pins can be crossed

2.6
2G Lift Dialer Installation
MULTI LIFT INSTALLATION 1. Insert the SIM card; 2. Connect the antenna; 3. Connect the VoiceBox; 4. Switch-on the 2G Lift Dialer; 5. Check the Power Led is ON; 6. Check the GSM Led is Blinking or ON; 7. Configure the 2G Lift Dialer.
2G Lift Dialer
SIM
ANTENNA
3 4 5 6 2221
CONFIG
GSM
POWER
CAR 2
8D5804 Voice Box Car
Phone for: - Configuration - Intercom
N.O. or N.C. External alarm button
Jumper for car 3 position
No jumper for car 1 position
8D5804 Voice Box Car
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
1
11
2 4
7 8 9
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
7 8 9
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
7 8 9
CAR 3
1 2
11 12
CAR 1
2 1
Jumper for car 2 position
10
8D5804 Voice Box Car
N.O. or N.C. External alarm button
11
4
N.O. or N.C. External alarm button
4
GND +Vdc (12-24Vdc - 1A min)
Pins can be crossed

2.7
2G Lift Dialer Installation
MULTI LIFT INSTALLATION 1. Insert the SIM card; 2. Connect the antenna; 3. Connect the VoiceBox; 4. Switch-on the 2G Lift Dialer; 5. Check the Power Led is ON; 6. Check the GSM Led is Blinking or ON; 7. Configure the 2G Lift Dialer.
2G Lift Dialer
SIM
ANTENNA
3 4 5 6 2221
CONFIG
GSM
POWER
CAR 2
8D5804 Voice Box Car
Phone for: - Configuration - Intercom
N.O. or N.C. External alarm button
Jumper for car 3 position
No jumper for car 1 position
8D5804 Voice Box Car
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
1
11
2 4
7 8 9
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
7 8 9
EXTERNAL LIGHTS
Sent/Received Alarm
External Power supply:
20mA - 30Vdc max
+Vdc GND
7 8 9
CAR 3
1 2
11 12
CAR 1
2 1
Jumper for car 2 position
10
8D5804 Voice Box Car
N.O. or N.C. External alarm button
11
4
N.O. or N.C. External alarm button
4
GND +Vdc (12-24Vdc - 1A min)
Pins can be crossed

2.8
2G Lift Dialer Installation
2.3. teStS during the inStallation
Locate a proper position for the various parts of the system and before the final mounting check the following:
• 2GLiftDialerEmergencyphone
• SIMcorrectlyinserted;
• antennaconnectorscreweduntilitsendpoint;
Apply the magnetic base of the antenna only on metal zone, without connection to earth
Please use eventually the metal support, find in the package, fixed it to the wall
• goodGSMsignal:yellowledonorblinking;
• correctconnectionandcorrespondenceofthecablestothepinsofterminalboard;
• terminalboardscrewstightenedallthewaydown;
• terminalboardcompletelyttedonthe2GLiftDialer.
• VoiceBoxspeakerphone
• OnceVoiceBoxhasbeenplacedbehindthecaroperatingpanel,itwon'tbepossibleanymoretoaccesstheterminal
board for connections;
• connectiontotheterminalboardofthe2wirescomingfrom2GLiftDialer;
• connectionofthe2wiresfortheliftalarmbutton:thebuttonmusta2contactbuttonstoseparatethecircuitforthe
activation of the alarm call from the bell circuit;
• formodel8D5804,eventualjumpertoidentifyCar1–Car2–Car3;
• formodel8D5780,jumpertoidentifyTop–Pit;
• correctdisplayofthelightsignalsbehindthecaroperatingpanel;
• correctcorrespondenceofthemicrophonebehindtheholeonthecaroperatingpanel;
• correctcorrespondenceofthespeakerbehindtheholesonthecaroperatingpanel.
Once the installation is completed you can go on with the configuration of the Emergency phone in few minutes with
one of the following possibilities, as you prefer:
• ApplicationforsmartphoneAndroid:LiftManager;
• viaSMSbymobilephone;
• withtelephoneormobilephonecallingthe2GLiftDialer;
• withacommonDTMFphoneconnectedtopins3-4of2GLiftDialer.

2.9
2G Lift Dialer Installation
2.4. Before PoWering lift dialer on
Place 2G Lift Dialer where you prefer, in a zone with a good GSM signal, and go on as follows:
1. Open the SIM holder by slightly pressing and pushing it horizontally
toward the internal side of the card.
Now insert the SIM card. Pay attention to the SIM cut corner and be
sure the golden contacts of the SIM are turned downwards when closing
the SIM holder.
Close the SIM holder by slightly pressing and pushing it horizontally in
the opposite side to block it and correctly fix the SIM.
2. Connect the GSM antenna you find in the package to the golden SMA
connector. Screw it clockwise; in case of problem do not force but remove
the antenna and try again.
Apply the magnetic base of the antenna only on metal zone,
without connection to earth.
Please use eventually the metal support, find in the
package, fixed it to the wall.
3. Connect pins 5-6 of 2G Lift Dialer to pins 1-2 of Voice Box.
PINS CAN BE CROSSED.
For a good audio quality use a twisted pair for the connection. Otherwise you can use two unused wires already present
in the car cable or use the the wires already present and used for the bell after having modified the system as described
in paragraph RELAY1: BELL MANAGEMENT.
In this case the audio quality could not be the best one.
4. Connecteventuallytheexternalbutton(orbuttons)onVoiceBox.
5. Nowpower 2G Lift Dialer on following the polarity:
pin 21 : 12-24 Vdc
pin 22 : GND
We suggest to use Digicom power supply for 2G Lift Dialer:
Switching power supply (IN: 100-240 Vac / 50-60Hz / 0,5A – OUT 12 Vdc / 1A) (code 8D6065)
DIGICOM DOES NOT GUARANTEE A CORRECT OPERATION WITH OTHER POWER SUPPLIES.
6. Check the LED power on:
Power: green fixed ON
GSM: at the beginning OFF; after the affiliation to the GSM network it is yellow fixed ON or blinking.
SIM
1 5 10 15 20
BATTERIA
MORSETTIERA
ANTENNA
22

2.10
2G Lift Dialer Installation
2.5. Voice BoX connection
PlacetheVoiceBox(es)whereyoupreferandgoonasfollows:
1. Connect pins 5-6 of 2G Lift Dialer to pins 1-2 of Voice Box.
PINS CAN BE CROSSED.
For a good audio quality use a twisted pair for the connection. Otherwise you can use two unused wires already present
in the car cable or use the the wires already present and used for the bell after having modified the system as described
in paragraph RELAY1: BELL MANAGEMENT.
In this case the audio quality could not be the best one.
2. Set Voice Box as Car – Top – Pit:
for model 8D5804, from version fw 0.0.53 (multilift)
 VoiceBoxCar1=factoryconguration(nojumper)
 VoiceBoxCar2=lockpins10-11
 VoiceBoxCar3=lockpins12-11
for model 8D5780
 VoiceBoxTop=lockpins10-11
 VoiceBoxPit=lockpins12-11
Maximum 3 Voice Box can be present in the system.
3. Connect the external alarm button for the car to pin 4-11 of Voice Box.
The button can be N.O. or N.C. The button must have 2 contacts to separate the activation circuit of the alarm call from
the bell circuit.
4. Connecttheeventualexternal alarm button for Top - Pit to pins 3-11 of Voice Box.
The buttons installed on Top or in Pit, for technical people, can be N.O. or N.C. It is necessary that both buttons have
the same configuration: both N.O. or both N.C.
5. ConnecttheeventualexternalsignalofSentAlarmtopins7-9.
6. ConnecttheeventualexternalsignalofReceivedAlarmtopins8-9.