Digicom Vepro Remote Videoalarm User manual

For further information visit our
website
http://www.digicom.it
VEPRO 16/10/2008
Remote Videoalarm
VEPRO
lEDGE/GSM or LAN Remote Alarm System
lBuilt-in communication module
lWireless LAN connection
lUp to 4 IP Videocameras (Wi-Fi or LAN) management
lUp to 20 433MHz wireless sensors management
lPre and post alarm image management
DESCRIPTION
VEPRO System is the Digicom’s innovative solution for the remote
control and videoalarm.
A cutting edge solution of security projected and carried out by Digicom
to build a wireless videoalarm system with EDGE, GPRS or LAN
connectivity.
All the Vepro tecnology is mainly based on the concentrator, with
Gateway functions, that is able to monitor up to 4 IP videocameras
(via Wi-Fi or LAN) and up to 20 intelligent sensors (Smart series).
The concentrator is equipped with a Class 10 EDGE/GPRS
communication device that allows the remote control of the installation
status and to send the alarms to the headquarter.
The system is composed by Wi-Fi IP videocameras (IP Camera 300), by
wireless sensors and by backup systems to guarantee the operation
even when power is off.
The 433MHz wireless sensors are continuously
controlled by the concentrator that sends scheduled
SMS and checks the battery charge. Each sensor is
unique of its kind (as in high level alarm systems) and
allows an exact identication of the alarm zone.
The latest generation IP videocameras can operate by day and night as they are equipped
with a light sensor and an infrared led. Furthermore they can manage the Duplex function with
a double ow of images both in photo format (JPG) and in streaming in MPEG-4 format. The
videocamera can be supplied with a battery back-up device to guarantee the operation even when
power is off.
Security

For further information visit our
website
http://www.digicom.it
Vepro constantly controls the presence of sensors
and videocameras and in case of alarm (generated by
sensors), it captures the images coming before and
after the alarm and sends them immediately to the
control center to analyse the situation.
Vepro can be used also as a local videosurveillance
system togheter with a specic storage unit equipped
with an hard-disk.
In this way all the system can be remote viewed, at
any time,through the EDGE connection or via LAN
(for example through the ADSL router).
The surveillance center can display on the PC the events
that caused the alarm or verify the live situation.
If a broadband connection is available (ADSL, UMTS),
also the remote listening will be possible through the
microphone on the videcamera.
TECHNICAL FEATURES
lBuilt-in Class 10 EDGE/GPRS communication device
lBuilt-in 54 Mbps Wi-Fi module
lBuilt-in 433 MHz receiver
l1 input
l1 output
lManagement of I/O input for alarms and activations
lMailing of Pre & Post alarm images
lManagement of MJPEG images
lImages resolution: 640 x 480 pixel max
lManagement of up to 4 Wi-Fi videcameras (54 Mbps)
lManagement of up to 20 SMART sensors
lAnti-Tamper
l10/100 4 ports switch
lInternal Back-up Battery
lBuilt-in sound buzzer
SMART SENSOR
l433 MHz Wireless sensor
lWired magnetic REED
lVertical TILT sensor
lSensors status check (magnetic and TILT) every seconds
lAlive message every 30 seconds
lUnique sensor via MAC address
lBattery low indication
lLong-Life battery (more than 1 year)
IP Camera 300
Smart Sensor
Vepro
Control Center
(MPEG-4)
Images Storage Server
(FTP Server)
INTERNET
EDGE/GPRS