Digital Projection M-Vision Cine 320 3D series User manual

Rev E July 2014
USER MANUAL
INSTALLATION AND QUICK-START GUIDE
CONNECTION GUIDE
OPERATING GUIDE
REMOTE COMMUNICATIONS GUIDE
114-617E
M-Vision Cine 320 3D series
High Brightness Digital Video Projector
16:9 widescreen display

Digital Projection M-Vision Cine 320 3D Series NoTOC
i
Rev E July 2014
Digital Projection M-Vision Cine 320 3D Series
About This Document
A serial number is located on the back of the projector. Record it here:
Follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.
Keep this manual handy for future reference.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless
the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their respective owners.
Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.
Copyright © 2014 Digital Projection Ltd. All rights reserved.
Notes

Digital Projection M-Vision Cine 320 3D Series NoTOC
ii
Rev E July 2014
Digital Projection M-Vision Cine 320 3D Series
CONTENTS
INSTALLATION AND QUICK-START GUIDE..............................1
WHAT’S IN THE BOX? ................................................................... 3
PROJECTOR OVERVIEW ............................................................... 4
Front and rear views ............................................................................. 4
Remote control...................................................................................... 4
Control panel indicators ........................................................................ 5
Power indicator (blue light) ....................................................................... 5
Error codes (red light) ............................................................................. 6
POSITIONING THE SCREEN AND PROJECTOR............................. 7
OPERATING THE PROJECTOR...................................................... 8
Switching the projector on..................................................................... 8
Switching the projector off..................................................................... 8
Adjusting the lens.................................................................................. 9
Zoom.................................................................................................. 9
Focus ................................................................................................. 9
Shift ................................................................................................... 9
Selecting an input signal or test pattern.............................................. 10
Input signal ........................................................................................ 10
Test pattern ........................................................................................ 10
Adjusting the image............................................................................. 11
Orientation ......................................................................................... 11
Aspect ratio........................................................................................ 11
Picture .............................................................................................. 11
3D ................................................................................................... 11
CONNECTION GUIDE ............................................................................13
SIGNAL INPUTS .......................................................................... 15
Component 1 and 2............................................................................. 15
RGsB only (not RGBS).......................................................................... 15
YPbPr/YCbCr ..................................................................................... 15
RGB .................................................................................................... 15
HDMI 1 and 2...................................................................................... 15
SUPPORTED SIGNAL INPUT MODES ......................................... 16
CONTROL CONNECTIONS........................................................... 19
Service port......................................................................................... 19
LAN and RS232 .................................................................................. 19
Wired remote control........................................................................... 19
Trigger 1 and 2 outputs ....................................................................... 19
3D Sync output.................................................................................... 19
LAN IP CONFIGURATION UTILITY............................................... 20
WIRING DETAILS......................................................................... 21
Signal inputs........................................................................................ 21
Component 1...................................................................................... 21
Component 2...................................................................................... 21
RGB input.......................................................................................... 21
HDMI inputs ....................................................................................... 22
Control connections ............................................................................ 23
Wired remote control connection.............................................................. 23
Serial control input ............................................................................... 23
Trigger 1 & 2 outputs ............................................................................ 24
LAN connection................................................................................... 24
3D sync connection .............................................................................. 24

Digital Projection M-Vision Cine 320 3D Series NoTOC
iii
Rev E July 2014
Digital Projection M-Vision Cine 320 3D Series
OPERATING GUIDE ................................................................................25
USING THE MENUS ..................................................................... 27
Opening the OSD................................................................................ 27
Opening a menu.................................................................................. 27
Exiting menus and closing the OSD.................................................... 27
Inside a menu...................................................................................... 28
Accessing sub-menus........................................................................... 28
Executing commands............................................................................ 28
Editing projector settings..................................................................... 29
Choosing a value from a list ................................................................... 29
Changing the value without viewing the list................................................. 29
Using a slider to set a value.................................................................... 29
A TOUR OF THE MENUS.............................................................. 30
Main menu .......................................................................................... 30
Aspect Ratio....................................................................................... 31
Presets ............................................................................................. 32
Overscan........................................................................................... 33
3D Control ......................................................................................... 33
Input Select........................................................................................ 34
Resync ............................................................................................. 34
Image menu ........................................................................................ 35
Advanced Image menu ....................................................................... 36
Colorspace ........................................................................................ 36
Gamma............................................................................................. 36
Color Temperature ............................................................................... 36
Color Gamut....................................................................................... 37
Brilliant Color®.................................................................................... 37
Adaptive Contrast ................................................................................ 37
RGB Adjust ........................................................................................ 37
Fine Sync .......................................................................................... 38
Color Mode ........................................................................................ 38
System menu ...................................................................................... 39
Control menu....................................................................................... 40
Service menu ...................................................................................... 40
Factory Reset ..................................................................................... 40
Test patterns ...................................................................................... 40
MENU MAP .................................................................................. 41
MAIN ................................................................................................... 41
IMAGE................................................................................................. 41
ADVANCED IMAGE............................................................................ 42
SYSTEM ............................................................................................. 43
CONTROL........................................................................................... 43
SERVICE ............................................................................................ 43
CONTENTS (continued)

Digital Projection M-Vision Cine 320 3D Series NoTOC
iv
Rev E July 2014
Digital Projection M-Vision Cine 320 3D Series
REMOTE COMMUNICATIONS GUIDE ..........................................45
INTRODUCTION........................................................................... 47
Examples ............................................................................................ 47
COMMAND GUIDE ....................................................................... 48
Main menu .......................................................................................... 48
Image menu ........................................................................................ 49
Advanced Image menu ....................................................................... 49
System menu ...................................................................................... 50
Control menu....................................................................................... 51
Service menu ...................................................................................... 51
Miscellaneous commands................................................................... 52
CONTENTS (continued)

Digital Projection M-Vision Cine 320 3D Series
This page is intentionally left blank.

Rev E July 2014
INSTALLATION AND QUICK-START GUIDE
M-Vision Cine 320 3D series
High Brightness Digital Video Projector
16:9 widescreen display

Digital Projection M-Vision Cine 320 3D Series IN THIS GUIDE Installation and Quick-Start Guide
2
Rev E July 2014
IN THIS GUIDE
What’s In The Box?............................................................................................. 3
Projector Overview............................................................................................. 4
Front and rear views ...................................................................................................4
Remote control............................................................................................................4
Control panel indicators.............................................................................................5
Power indicator (blue light) ............................................................................................... 5
Error codes (red light) ....................................................................................................... 6
Positioning The Screen And Projector......................................................... 7
Operating The Projector ................................................................................... 8
Switching the projector on.........................................................................................8
Switching the projector off.........................................................................................8
Adjusting the lens .......................................................................................................9
Zoom................................................................................................................................. 9
Focus ................................................................................................................................ 9
Shift................................................................................................................................... 9
Selecting an input signal or test pattern.................................................................10
Input signal......................................................................................................................10
Test pattern .....................................................................................................................10
Adjusting the image..................................................................................................11
Orientation ......................................................................................................................11
Aspect ratio .....................................................................................................................11
Picture.............................................................................................................................11
3D ...................................................................................................................................11

Digital Projection M-Vision Cine 320 3D Series WHAT’S IN THE BOX? Installation and Quick-Start Guide
3
Rev E July 2014
What’s In The Box? Notes
Make sure your box contains
everything listed. If any pieces are
missing, contact your dealer.
You should save the original box
and packing materials, in case you
ever need to ship your projector.
2
PIC
MUTE
4
B
SHARP
O-SCAN NR
GAMMA
C-TEMP TEST
BRI-C
3D
SWAP
3D
FORMAT
2D/3D
ENTER
SOURCE
3
6
1
ASPECT
RATIO
MENU
USER MEMORY
C
A
|
ON POWER OFF
Remote control
(112-961)
2x AAA batteries
Power cable, United Kingdom
(102-180)
User Manual on disc
(115-759)
Important Information (110-287)
Power cable, Europe
(102-163)
Power cable, North America
(102-165)
Projector
5mm Allen wrench 3D sync cable

Digital Projection M-Vision Cine 320 3D Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
4
Rev E July 2014
Projector Overview Notes
The projector uses the standard
M-Vision series infrared remote
control.
Some of the controls are duplicated
on the projector control panel, as
shown on the next page.
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Lens shift controls
(under the badge)
Front and rear views Remote control
Front
infrared
window
Lens
Focus
adjustment Zoom
adjustment
Air outlet
Air outlet
Control panel Rear infrared window
Air outlet
Air inlets
Adjustable feet
Lamp cover
Mains input
Connection panel
2
PIC
MUTE
4
B
SHARP
O-SCAN NRGAMMA
C-TEMP TESTBRI-C
3D
SWAP
3D
FORMAT
2D/3D
ENTER
SOURCE
3
6
1
ASPECT
RATIO
MENU
USER MEMORY
CA
|
ON POWER OFF
Infrared reception

Digital Projection M-Vision Cine 320 3D Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
5
Rev E July 2014
Control panel indicators
Some of the functions on the remote control are duplicated on the projector control panel, as shown here.
MENU
MENU
POWER
POWER
ISSUE
ISSUE
LED STATUS
LED STATUS
POWER
POWER
S
E
L
E
C
T
S
E
L
E
C
T
SOURCE
SOURCE
Power indicator (blue light)
The blue Power indicator will light when the projector is in STANDBY mode, and will ash when the projector is cooling down or warming up, as
shown in the chart below. It will be off when the projector is in normal running mode.
Condition Power indicator behaviour (blue light)
Standby On
Cooling / Warming up Flashing
Power on (Normal) Off
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.

Digital Projection M-Vision Cine 320 3D Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
6
Rev E July 2014
Error codes (red light)
If the projector detects an error, the red Issue indicator will ash as shown in the chart below.
For example, if the lamp door is left open, the red indicator will ash twice followed by a pause, then the sequence will repeat until the error
condition is corrected.
Condition Issue indicator behaviour (red light)
Lamp fail Flashes once, then pauses, then repeats.
Lamp door open Flashes twice, then pauses, then repeats.
Fan fail Flashes three times, then pauses, then repeats.
Over temperature Flashes four times, then pauses, then repeats.
System error On.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
delay
delay
delay
delay

Digital Projection M-Vision Cine 320 3D Series POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide
7
Rev E July 2014
Positioning The Screen And Projector
Consider the following:
• When installing the screen, ensure that it is in the best position for viewing by your audience.
• When positioning the projector, ensure that it is at a suitable distance from the screen for the image to ll the screen.
• Whether you are mounting the projector on the ceiling or standing it on its adjustable feet, ensure that it is level and perpendicular to the
screen.
The dimension drawing below shows the positions of the feet for table mounting, and the xing holes for ceiling mounting.
Notes
All dimensions on the diagram on
this page are in mm.
Ensure that there is at least
30cm (12in) of space between the
ventilation outlets and any wall,
and 10cm (4in) on all other sides.
Do not stack more than 3
projectors.
Do not tilt the projector more than
±12° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
The projector may be tilted to one
side and positioned in portrait mode
as long as the exhaust outlet points
upward.
When positioning the projector in
portrait mode, ensure adequate
airow to the air inlet.

Digital Projection M-Vision Cine 320 3D Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
8
Rev E July 2014
Operating The Projector
Switching the projector on
1. Connect the power cable between the mains supply and the projector.
2. When the self-test has completed, the power indicator on the projector control panel shows blue to indicate that the projector is in
STANDBY mode and the lamp is switched off. Press and hold for three seconds either of the following:
• The POWER button on the control panel
• The ON button on the remote control
The power indicator on the control panel ashes blue for a few seconds whilst the lamp comes up to full brightness. When the projector is fully
switched on and ready for use, the power indicator switches off.
Switching the projector off
1. Press POWER on the control panel or the POWER button on the remote control, then press the button again to conrm.
The lamp will switch off, the power indicator on the control panel will start ashing in blue and the projector will be in STANDBY mode
while cooling off.
2. Wait until the power indicator has stopped ashing and the fans have stopped working, then disconnect the power cable.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Even if the power indicator has
stopped ashing, please allow the
lamp to cool off for ve minutes
before:
• disconnecting the power
• moving the projector
• changing the lamp

Digital Projection M-Vision Cine 320 3D Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
9
Rev E July 2014
Adjusting the lens
Zoom
Turn the smooth ring on the lens, closest to the case, to adjust the zoom so that the image lls the screen.
Focus
Turn the knurled ring at the outer end of the lens, to adjust the focus until the image is sharp.
Shift
1. To reveal the adjustment access holes, slide the Digital Projection badge in the direction shown below, then gently lift it off by hand.
2. Use the 5mm Allen wrench to adjust the horizontal and vertical position of the image.
Notes
Do NOT prise off the badge using
a tool.
Lens shift controls are not available
on projectors tted with the xed
0.73:1 lens.
Horizontal shift Vertical shift

Digital Projection M-Vision Cine 320 3D Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
10
Rev E July 2014
Selecting an input signal or test pattern
Input signal
Connect an image source to the projector. The signal should be automatically detected by the projector, and should be displayed within two or
three seconds.
If more than one signal is connected, select the image you want to display in one of the following ways:
• Access the Main menu (either from the remote control or from the control panel) and then go to Input Select.
• On the remote control, select from the inputs using the number buttons 1to 6
• On the control panel, press SOURCE to cycle through all the inputs.
Test pattern
If you have no image source connected to the projector, you can display a test pattern instead. To display a test pattern, do either of the
following:
• Press the TEST button TEST on the remote control to cycle through all test patterns.
• Access the Service menu and select a test pattern.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.

Digital Projection M-Vision Cine 320 3D Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
11
Rev E July 2014
Adjusting the image
Orientation
To change the image orientation, access the System menu and then open the Rear Projection and Ceiling Mode settings.
Aspect ratio
To set up an aspect ratio for your image, do either of the following:
• Press the ASPECT RATIO button on the remote control to cycle through the available settings.
• Access the Main menu and then select the Aspect Ratio setting.
Picture
To change brightness and contrast, do either of the following:
• Press BRIGHTNESS or CONTRAST on the remote control, then use the arrow buttons to move the sliders.
• Access the Image menu and adjust the Brightness and Contrast settings.
3D
In the Main menu, use the 3D Control sub-menu.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.

Digital Projection M-Vision Cine 320 3D Series Installation and Quick-Start Guide
This page is intentionally left blank.

Rev E July 2014
CONNECTION GUIDE
M-Vision Cine 320 3D series
High Brightness Digital Video Projector
16:9 widescreen display

Digital Projection M-Vision Cine 320 3D Series IN THIS GUIDE Connection Guide
Rev E July 2014
IN THIS GUIDE
Signal Inputs....................................................................................................... 15
Component 1 and 2...................................................................................................15
RGsB only (not RGBS) ...................................................................................................15
YPbPr/YCbCr..................................................................................................................15
RGB ............................................................................................................................15
HDMI 1 and 2..............................................................................................................15
Supported Signal Input Modes .................................................................... 16
Control Connections ........................................................................................ 19
Service port ...............................................................................................................19
LAN and RS232 .........................................................................................................19
Wired remote control ................................................................................................19
Trigger 1 and 2 outputs ............................................................................................19
3D Sync output..........................................................................................................19
LAN IP Conguration Utility .......................................................................... 20
Wiring Details ..................................................................................................... 21
Signal inputs..............................................................................................................21
Component 1 ..................................................................................................................21
Component 2 ..................................................................................................................21
RGB input .......................................................................................................................21
HDMI inputs ....................................................................................................................22
Control connections .................................................................................................23
Wired remote control connection ....................................................................................23
Serial control input ..........................................................................................................23
Trigger 1 & 2 outputs.......................................................................................................24
LAN connection...............................................................................................................24
3D sync connection.........................................................................................................24