Digital Projection M-Vision Cine 320 Series User manual

Rev D July 2014
USER MANUAL
INSTALLATION AND QUICK-START GUIDE
OPERATING GUIDE
CONNECTION GUIDE
REMOTE COMMUNICATIONS GUIDE
114-618D
M-Vision Cine 320 Series
High Brightness Digital Video Projector
16:9 widescreen display

i
Rev D July 2014
Digital Projection M-Vision Cine 320 Series
i
About This Document
A serial number is located on the back of the projector. Record it here:
Follow the instructions in this manual carefully to ensure safe and long-lasting use of the projector.
Keep this manual handy for future reference.
Symbols used in this manual
Many pages in this document have a dedicated area for notes. The information in that area is accompanied by the following symbols:
WARNING: this symbol indicates that there is a danger of physical injury to yourself and/or damage to the equipment unless
the instructions are closely followed.
NOTE: this symbol indicates that there is some important information that you should read.
Product revision
Because we at Digital Projection continually strive to improve our products, we may change specications and designs, and add new features
without prior notice.
Legal notice
Trademarks and trade names mentioned in this document remain the property of their respective owners.
Digital Projection disclaims any proprietary interest in trademarks and trade names other than its own.
Copyright © 2014 Digital Projection Ltd. All rights reserved.
Notes

ii
Rev D July 2014
Digital Projection M-Vision Cine 320 Series
ii
CONTENTS
INSTALLATION AND QUICK-START GUIDE..............................1
WHAT’S IN THE BOX? ................................................................... 3
PROJECTOR OVERVIEW ............................................................... 4
Front and rear views ............................................................................. 4
Remote control...................................................................................... 4
Control panel......................................................................................... 5
Buttons ............................................................................................... 5
Indicators............................................................................................. 6
POSITIONING THE SCREEN AND PROJECTOR............................. 7
CHANGING THE LAMP MODULE ................................................... 8
OPERATING THE PROJECTOR...................................................... 9
Switching the projector on..................................................................... 9
Switching the projector off..................................................................... 9
Adjusting the lens................................................................................ 10
Zoom................................................................................................ 10
Focus ............................................................................................... 10
Shift ................................................................................................. 10
Selecting an input signal or test pattern.............................................. 11
Input signal ........................................................................................ 11
Test pattern ........................................................................................ 11
Adjusting the image............................................................................. 12
Orientation ......................................................................................... 12
Aspect ratio........................................................................................ 12
Picture .............................................................................................. 12
CONNECTION GUIDE ............................................................................13
SIGNAL INPUTS .......................................................................... 15
HDMI 1 and 2...................................................................................... 15
RGB .................................................................................................... 15
Component 1....................................................................................... 15
Component 2....................................................................................... 15
Video ................................................................................................... 15
S-Video ............................................................................................... 15
SUPPORTED SIGNAL INPUT MODES ......................................... 16
CONTROL CONNECTIONS........................................................... 19
RS232 ................................................................................................. 19
Wired remote control........................................................................... 19
Trigger 1 and 2 outputs ....................................................................... 19
WIRING DETAILS......................................................................... 20
Signal inputs........................................................................................ 20
Component 1...................................................................................... 20
Component 2...................................................................................... 20
RGB input.......................................................................................... 20
HDMI inputs ....................................................................................... 21
S-Video............................................................................................. 22
Composite Video ................................................................................. 22
Control connections ............................................................................ 23
Wired remote control connection.............................................................. 23
Serial control input ............................................................................... 23
Trigger 1 & 2 outputs ............................................................................ 24

iii
Rev D July 2014
Digital Projection M-Vision Cine 320 Series
iii
OPERATING GUIDE ................................................................................25
USING THE MENUS ..................................................................... 27
Navigation ........................................................................................... 27
Editing projector settings..................................................................... 28
Sliders .............................................................................................. 28
Commands ........................................................................................ 28
A TOUR OF THE MENUS.............................................................. 29
Main menu .......................................................................................... 29
Aspect Ratio....................................................................................... 29
Presets ............................................................................................. 30
Brightness, Contrast, Saturation, Hue, Sharpness, Noise Reduction ................. 31
Overscan........................................................................................... 31
Input Select........................................................................................ 32
Resync ............................................................................................. 32
Advanced menu .................................................................................. 33
Color Space ....................................................................................... 33
Video Standard ................................................................................... 33
Gamma............................................................................................. 34
Color Temperature ............................................................................... 34
Color Gamut....................................................................................... 34
Brilliant Color®.................................................................................... 35
Adaptive Contrast ................................................................................ 35
RGB Adjust ........................................................................................ 35
Fine Sync .......................................................................................... 36
Color Mode ........................................................................................ 37
System menu ...................................................................................... 38
Language .......................................................................................... 38
Source Enable .................................................................................... 38
Menu Position..................................................................................... 39
Blank Screen ...................................................................................... 39
Auto Power On.................................................................................... 39
Auto Power Off.................................................................................... 39
Rear Projection ................................................................................... 40
Ceiling Mode ...................................................................................... 40
Logo Display ...................................................................................... 40
Control menu....................................................................................... 41
Keys 1 to 5......................................................................................... 41
Trigger 1 and Trigger 2 .......................................................................... 42
Auto Source ....................................................................................... 42
Service menu ...................................................................................... 43
Factory Reset ..................................................................................... 43
Blue Only........................................................................................... 44
Test Patterns ...................................................................................... 44
Altitude ............................................................................................. 44
MENU MAP .................................................................................. 45
MAIN ................................................................................................... 45
ADVANCED ........................................................................................ 46
SYSTEM ............................................................................................. 47
CONTROL........................................................................................... 48
SERVICE ............................................................................................ 48
CONTENTS (continued)

iv
Rev D July 2014
Digital Projection M-Vision Cine 320 Series
iv
REMOTE COMMUNICATIONS GUIDE ..........................................49
INTRODUCTION........................................................................... 51
Serial Port setup.................................................................................. 51
Remote commands............................................................................. 52
Key commands ................................................................................... 52
Operation commands............................................................................ 52
COMMAND GUIDE ....................................................................... 53
Key commands ................................................................................... 53
Operation commands.......................................................................... 55
CONTENTS (continued)

Digital Projection M-Vision Cine 320 Series
This page is intentionally left blank.

Rev D July 2014
INSTALLATION AND QUICK-START GUIDE
M-Vision Cine 320 Series
High Brightness Digital Video Projector
16:9 widescreen display

Digital Projection M-Vision Cine 320 Series IN THIS GUIDE Installation and Quick-Start Guide
2
Rev D July 2014
IN THIS GUIDE
What’s In The Box?............................................................................................. 3
Projector Overview............................................................................................. 4
Front and rear views ...................................................................................................4
Remote control............................................................................................................4
Control panel ...............................................................................................................5
Buttons.............................................................................................................................. 5
Indicators .......................................................................................................................... 6
Positioning The Screen And Projector......................................................... 7
Changing The Lamp Module ............................................................................ 8
Operating The Projector ................................................................................... 9
Switching the projector on.........................................................................................9
Switching the projector off.........................................................................................9
Adjusting the lens .....................................................................................................10
Zoom...............................................................................................................................10
Focus ..............................................................................................................................10
Shift.................................................................................................................................10
Selecting an input signal or test pattern.................................................................11
Input signal......................................................................................................................11
Test pattern .....................................................................................................................11
Adjusting the image..................................................................................................12
Orientation ......................................................................................................................12
Aspect ratio .....................................................................................................................12
Picture.............................................................................................................................12

Digital Projection M-Vision Cine 320 Series WHAT’S IN THE BOX? Installation and Quick-Start Guide
3
Rev D July 2014
What’s In The Box? Notes
Make sure your box contains
everything listed. If any pieces are
missing, contact your dealer.
You should save the original box
and packing materials, in case you
ever need to ship your projector.
2
PIC
MUTE
4
B
SHARP
O-SCAN NR
GAMMA
C-TEMP TEST
BRI-C
3D
SWAP
3D
FORMAT
2D/3D
ENTER
SOURCE
3
6
1
ASPECT
RATIO
MENU
USER MEMORY
C
A
|
ON POWER OFF
Remote control
(112-961)
2x AAA batteries
Power cable, United Kingdom
(102-180)
User Manual on disk
(115-759)
Important Information (110-287)
Power cable, Europe
(102-163)
Power cable, North America
(102-165)
Projector
5mm Allen wrench HDMI cable

Digital Projection M-Vision Cine 320 Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
4
Rev D July 2014
Projector Overview Notes
The projector uses the standard
M-Vision series infrared remote
control.
Some of the controls are duplicated
on the projector control panel, as
shown on the next page.
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Lens shift controls
(under the badge)
Front
infrared
window
Lens
Focus
adjustment Zoom
adjustment
Air outlets
Control panel Rear infrared window
Air inlets
Adjustable feet
Lamp cover
Mains input
Connection panel
2
PIC
MUTE
4
B
SHARP
O-SCAN NRGAMMA
C-TEMP TESTBRI-C
3D
SWAP
3D
FORMAT
2D/3D
ENTER
SOURCE
3
6
1
ASPECT
RATIO
MENU
USER MEMORY
CA
|
ON POWER OFF
Remote control
Infrared reception
Front and rear views

Digital Projection M-Vision Cine 320 Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
5
Rev D July 2014
Control panel
The projector control panel is designed to be read from the front or rear of the
projector, for ease of use.
Buttons
• Arrows, SELECT and MENU
Use these buttons to navigate the projector menus.
• POWER
Press to switch the projector on, press again to switch to STANDBY
mode.
• SOURCE
Cycle through the inputs, in the following order:
HDMI 1, HDMI 2, RGB, Composite 1, Composite 2, Video, S-Video,
HDMI 1...
The projector will automatically adjust to an active signal, and display it.
Otherwise it will continue searching through the inputs until it nds a valid
signal.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
MENU
MENU
POWER
POWER
ISSUE
ISSUE
LED STATUS
LED STATUS
POWER
POWER
S
E
L
E
C
T
S
E
L
E
C
T
SOURCE
SOURCE

Digital Projection M-Vision Cine 320 Series PROJECTOR OVERVIEW Installation and Quick-Start Guide
6
Rev D July 2014
Indicators
Power indicator (blue light)
The blue Power indicator will light when the projector is in STANDBY mode, and will ash when the projector is cooling down or warming up, as
shown in the chart below. It will be off when the projector is in normal running mode.
Condition Power indicator behaviour (blue light)
Standby On
Cooling / Warming up Flashing
Power on (Normal) Off
Error codes (red light)
If the projector detects an error, the red Issue indicator will ash as shown in the chart below.
For example, if the lamp door is left open, the red indicator will ash twice followed by a pause, then the sequence will repeat until the error
condition is corrected.
Condition Issue indicator behaviour (red light)
Lamp fail Flashes once, then pauses, then repeats.
Fan fail Flashes twice, then pauses, then repeats.
Over temperature Flashes three times, then pauses, then repeats.
System error On.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
delay
delay
delay

Digital Projection M-Vision Cine 320 Series POSITIONING THE SCREEN AND PROJECTOR Installation and Quick-Start Guide
7
Rev D July 2014
Positioning The Screen And Projector
Consider the following:
• When installing the screen, ensure that it is in the best position for viewing by your audience.
• When positioning the projector, ensure that it is at a suitable distance from the screen for the image to ll the screen.
• Whether you are mounting the projector on the ceiling or standing it on its adjustable feet, ensure that it is level and perpendicular to the
screen.
The drawing below shows the positions of the feet for table mounting, and the xing holes for ceiling mounting.
1Four adjustable feet
2Three M6 holes for ceiling mount
The screws should not penetrate
more than 15 mm into the body of
the projector.
Notes
Ensure that there is at least
30cm (12in) of space between the
ventilation outlets and any wall,
and 10cm (4in) on all other sides.
Do not stack more than 3
projectors.
Do not tilt the projector more than
±12° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
The projector may be tilted to one
side and positioned in portrait mode
as long as the exhaust outlet points
upward.
When positioning the projector in
portrait mode, ensure adequate
airow to the air inlet.
1
2
1
1
1
2
2

Digital Projection M-Vision Cine 320 Series CHANGING THE LAMP MODULE Installation and Quick-Start Guide
8
Rev D July 2014
Changing The Lamp Module
1. Turn the power off and allow the lamp to cool for 5 minutes.
2. Unscrew the captive nger screw securing the lamp door, and remove the door
(Fig. 1).
3. Unscrew the two cross-head screws securing the lamp module to the projector.
4. Lift the wire handle up and use it to pull out the lamp module (Fig. 2).
5. Fit a new lamp module, pushing it rmly into place.
6. Tighten the two cross-head screws.
7. Locate the two lugs at the bottom of the lamp door into the slots, and re-t the
door. Tighten the nger screw.
Fig. 1 Removing the lamp door
Fig. 2 Removing the lamp
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
- changing the lamp
There are no user-serviceable
parts inside the lamp module.
The whole module should be
replaced.
Use only lamps supplied by
Digital Projection and intended
for this projector. Fitting any
other lamp could damage both
projector and lamp, and will
invalidate the warranty.
At the end of life, the lamp will not
strike, and the Issue indicator on the
control panel will ash red. (Typical
lamp life is 2000 hours)
Do not use the lamp for more than
2000 hours, as this may cause
serious lamp failure, damage the
lamp module and cause extra
cost on replacement.
Avoid touching the glass surface
of the lamp module. If you do
accidentally touch the glass,
clean it before use.
HID lamps produce high intensity
light. Do not look directly at
the light coming from the lamp
housing or the lens.
Opening the lamp door will switch
the projector OFF. The projector
cannot be operated until the door is
fully closed.

Digital Projection M-Vision Cine 320 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
9
Rev D July 2014
Operating The Projector
Switching the projector on
1. Connect the power cable between the mains supply and the projector.
2. When the self-test has completed, the power indicator on the projector control panel shows blue to indicate that the projector is in
STANDBY mode and the lamp is switched off. Press and hold for three seconds either of the following:
• The POWER button on the control panel
• The ON button on the remote control
The power indicator on the control panel ashes blue for a few seconds whilst the lamp comes up to full brightness. When the projector is
fully switched on and ready for use, the power indicator switches off.
Switching the projector off
1. Press POWER on the control panel or the POWER button on the remote control, then press the button again to conrm.
The lamp will switch off, the power indicator on the control panel will start ashing in blue while the lamp cools down.
2. Wait until the power indicator shows steady blue to indicate it has stopped cooling off and is now in STANDBY mode. Disconnect the
power cable.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Even if the power indicator has
stopped ashing, please allow the
lamp to cool off for ve minutes
before:
• disconnecting the power
• moving the projector
• changing the lamp

Digital Projection M-Vision Cine 320 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
10
Rev D July 2014
Adjusting the lens
Zoom
Turn the smooth ring on the lens, closest to the case, to adjust the zoom so that
the image lls the screen.
Focus
Turn the knurled ring at the outer end of the lens, to adjust the focus until the
image is sharp.
Shift
1. To reveal the adjustment access holes (Fig. 1), rotate the Digital Projection
badge on top of the projector.
2. Use the 5mm Allen wrench to adjust the horizontal and vertical position of
the image..
Notes
Do NOT prise off the badge using
a tool.
Lens shift controls are not available
on projectors tted with the xed
0.73:1 lens.
Horizontal shift Vertical shift
Fig. 1 Location of adjustment access holes
(under the badge)

Digital Projection M-Vision Cine 320 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
11
Rev D July 2014
Selecting an input signal or test pattern
Input signal
Connect an image source to the projector. The signal should be automatically detected by the projector, and should be displayed within two or
three seconds.
If more than one signal is connected, select the image you want to display in one of the following ways:
• Access the Main menu (either from the remote control or from the control panel) and then go to Input Select.
• On the remote control, select from the inputs using the number buttons 1to 6
• On the control panel, press SOURCE to cycle through all the inputs.
Test pattern
To display a test pattern, do either of the following:
• Press the TEST button TEST on the remote control to cycle through all test patterns.
• Access the Service menu and select a test pattern.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.

Digital Projection M-Vision Cine 320 Series OPERATING THE PROJECTOR Installation and Quick-Start Guide
12
Rev D July 2014
Adjusting the image
Orientation
To change the image orientation, access the System menu and adjust the Rear Projection and Ceiling Mode settings.
Aspect ratio
To set up an aspect ratio for your image, do either of the following:
• Press the ASPECT RATIO button on the remote control to cycle through the available settings.
• Access the Main menu and then select the Aspect Ratio setting.
Picture
To change brightness and contrast, do either of the following:
• Press BRIGHTNESS or CONTRAST on the remote control, then use the arrow buttons to move the sliders.
• Access the Image menu and adjust the Brightness and Contrast settings.
Notes
For full details of how to use the
controls and the menu system, see
the Operating Guide.

Rev D July 2014
CONNECTION GUIDE
M-Vision Cine 320 Series
High Brightness Digital Video Projector
16:9 widescreen display

Digital Projection M-Vision Cine 320 Series IN THIS GUIDE Connection Guide
Rev D July 2014
IN THIS GUIDE
Signal Inputs....................................................................................................... 15
HDMI 1 and 2..............................................................................................................15
RGB ............................................................................................................................15
Component 1 .............................................................................................................15
Component 2 .............................................................................................................15
Video ..........................................................................................................................15
S-Video.......................................................................................................................15
Supported Signal Input Modes .................................................................... 16
Control Connections ........................................................................................ 19
RS232 .........................................................................................................................19
Wired remote control ................................................................................................19
Trigger 1 and 2 outputs ............................................................................................19
Wiring Details ..................................................................................................... 20
Signal inputs..............................................................................................................20
Component 1 ..................................................................................................................20
Component 2 ..................................................................................................................20
RGB input .......................................................................................................................20
HDMI inputs ....................................................................................................................21
S-Video ...........................................................................................................................22
Composite Video.............................................................................................................22
Control connections .................................................................................................23
Wired remote control connection ....................................................................................23
Serial control input ..........................................................................................................23
Trigger 1 & 2 outputs.......................................................................................................24