Dinstar DAG1000-1S User manual

Quick Installation Guide
DAG1000-1S
DAG1000-2S
DAG1000-4S
Thanks for Choosing Dinstar's Product!
Please read this guide carefully before installing the gateway. If you need any technical support, please
contact us.
Tel: [phone]
Email: [e-mail]
Website: www.dinstar.com

1. Models and Ports
Port Type
Gateway
WAN
LAN
FXS
DAG1000-1S
1
1
1
DAG1000-2S
1
1
2
DAG1000-4S
1
1
4
2. Description of Indicators
Indicator
Definition
Status
Description
PWR
Power Indicator
On
The gateway is powered on
Off
The gateway is powered off or there is no power supply
RUN
Running Indicator
Slow
Flashing
The gateway is running properly
Fast
Flashing
If there is a SIP account registered successfully, the
indicator is fast flashing.
Off
The gateway is running improperly
FXS
Telephone ln-use
Indicator
On
FXS port is currently occupied by a call
Off
FXS port is idle or faulty.
WAN/LAN
Network Link
Indicator
Green
Flashing
The gateway is properly connected to network
Off
The gateway is not connected to network or network
connection is improper way.
Network Speed
Indicator
On
Work at 100Mbps
Off
Work at 10Mbps

3. Indicators and Ports
►DAG1000-1S
►DAG1000-2S
►DAG1000-4S
4. Installation Attentions
⚫Anti-jamming: to reduce the interference with telephone calls, it's highly
recommended that telephone lines connected to the gateway should be placed away
from power cables.
⚫Power supply: the power adapter of the gateway accepts DC input voltage of 12v.
Please ensure safe and stable power supply.
⚫Network bandwidth: please ensure there is enough network bandwidth so as to
guarantee stabilized running of the gateway.

⚫Temperature and humidity: to avoid any accident that might cause malfunction, it's
advised to install the gateway in an equipment room where temperature and humidity
are appropriate.
⚫Ventilation：to avoid overheating, please do not pile up the gateway with other devices
and make sure the gateway has good ventilation around.
⚫Mechanical load：please make sure the gateway is placed steadily to avoid damage.
It's highly advised to horizontally place the gateway on a flat surface or a cabinet.
5. Installation Instructions
►Connection Diagram for DAG1000-1S
►Connection Diagram for DAG1000-2S

►Connection Diagram for DAG1000-4S
6 Modify PC's IP Address
To log in the Web Management System of the gateway, firstly, you need to modify the IP
address of PC which is used to access the gateway and to make it at the same network
segment with the gateway.
○
1 On the PC, click 'Network (or Ethernet) →Properties'.

○
2 Double-click ‘Internet Protocol Version 4 (TCP/IPv4)'.
○
3 Select 'Use the following IP address', and then enter an available IP address
‘192.168.11.XXX' which is at the same network segment with '192.168.11.1'.
7 Log in Web Management System
Open a web browser and enter the gateway's IP address (default IP is 192.168.11.1). Then,
input username and password in the displayed login GUI. Both the default username and
password are admin.

8 Modify Gateway's IP Address
If you want to modify the IP address of DAG1000-1S/2S/4S, please click 'Network →
Local Network' in the navigation tree on the left of the Web Management System, and
then input new IP address and DNS server address on the displayed interface.
9 Configure SIP Server
Log in the Web Management System of the gateway, and then click SIP Server in the navigation
tree and then enter the address of the SIP server which is to be registered. Click Save in the last.
Click Port in the navigation tree on the left, and then click Add. Input the SIP account
and authentication password assigned by the SIP server.
Click Save and then restart the gateway for the new configurations to take effect.

10 Basic Operations
◆Dial *158# to query the IP address of LAN port of the gateway；
◆Dial *159# to query the IP address of WAN port of the gateway；
◆Dial *114# to query the telephone number of a FXS port;
◆Dial *165*000000# to restore default IP address, user name and password;
◆Restore factory default settings:
(1) dial *166*000000#；
(2) press the RST button for 7 seconds；
(3) Log in the gateway and then click 'Tools →Factory Reset', then click Apply and
restart the gateway.
◆Dial *111# to restart the gateway.
11 More Details
This document only provides instructions for quick installation and basic configuration, for
detailed configuration and parameter explanation, please make reference to user manual or
ask for online technical support.
IP Communication Solutions
Shenzhen Dinstar Co.,Ltd.
Website: https://www.dinstar.com