Dinstar MTG2000B User manual

1
MTG2000B Trunk Gateway User Manual
V1.0
Shenzhen Dinstar Co., Ltd.
Address: Floor 18, Building 7A, Vanke Cloud City Phase 1, Xingke 1st Street, Xili Sub-district,
Nanshan District, Shenzhen.
Postal Code: 518052
Telephone: [phone]
Fax: [phone]
Email：sales @dinstar.com
Website：www.dinstar.com

MTG2000B Trunk Gateway User Manual
1
Copyright @ Dinstar 2011-2021
Preface
Welcome
Thanks for choosing the MTG2000B Trunk Gateway! We hope you will make full use of this
rich-feature gateway. Contact us if you need any technical support: 0755-61919966
About This Manual
This manual provides information about the introduction of the gateway, and about how to
install, configure or use the gateway. Please read this document carefully before install the
gateway.
Intended Audience
This manual is aimed primarily at the following people:
Users
Engineers who install, configure and maintain the gateway.
Revision Record
Document Name
Document Version Firmware Version
MTG2000B Trunk Gateway User Manual V1.0
2021-12 v1.0
Conventions
Gateway or device mentioned in this document refers to the MTG2000B gateway. "Note"
marked in the document is what users need to pay attention to.

MTG2000B Trunk Gateway User Manual
2
Copyright @ Dinstar 2011-2021
Contents
1 Product Description............................................................................................... 6
1.1 Overview.......................................................................................................................... 6
1.2 Application Scenario.......................................................................................................6
1.3 Product Appearance....................................................................................................... 7
1.3.1 Image of MTG2000B..................................................................................................................... 7
1.3.2 Description of Ports and Indicators...............................................................................................7
1.3.3 Wire Sequence of RJ-48............................................................................. 错误！未定义书签。
1.4 Functions and Features...................................................................................................8
2 Quick Installation.................................................................................................13
2.1 Preparations before Installation.................................................................................. 13
2.1.1 Attentions for Installation........................................................................................................... 13
2.1.2 Preparations about Installation Site............................................................................................ 13
2.1.3 Installation Tools........................................................................................................................ 14
2.1.4 Unpacking................................................................................................................................... 14
2.2 Installation of MTG2000B............................................................................................. 14
2.2.1 Put MTG2000B into Shelf........................................................................................................... 14
2.2.2 Connect Ground Cable to MTG2000B.........................................................................................14
2.2.3 Connect MTG2000B to Ethernet................................................................................................. 15
2.2.4 Connect MTG2000B to PSTN..................................................................................................... 15
2.3 Cabling of E1/T1 Port...................................................................................................15
2.3.1 How to make RJ-48 joint for E1/T1 Cable................................................................................. 15
3 Basic Operation....................................................................................................17
3.1 Configuration of IP Address........................................................................................ 17
3.2 Local Maintenance........................................................................................................ 17
3.2.1 Example: Log in MTG2000B via Console Port...........................................................................18
3.3 Query IP.........................................................................................................................19
4 Configurations on Web Interface....................................................................... 21
4.1 How to Log in Web Interface.......................................................................................21
4.1.1 Network Connection................................................................................................................... 21
4.1.2 Preparations for Login................................................................................................................ 21
4.1.3 Log in Web Interface.................................................................................................................. 21
4.2 Introduction to Web Interface..................................................................................... 22
4.3 Configuration Flows....................................................................................................23
4.4 Status & Statistics......................................................................................................... 23
4.4.1 System Information.....................................................................................................................23

MTG2000B Trunk Gateway User Manual
3
Copyright @ Dinstar 2011-2021
4.4.2 E1/T1 Status................................................................................................................................24
4.4.3 PSTN Trunk Status..................................................................................................................... 26
4.4.4 IP Trunk Status........................................................................................................................... 26
4.4.5 SIP Registration Status............................................................................................................... 27
4.4.6 Call Info Status........................................................................................................................... 27
4.4.7 PRI Call Statistics....................................................................................................................... 28
4.4.8 SS7 Call Statistics.......................................................................................................................28
4.4.9 SIP Call Statistics........................................................................................................................29
4.4.10 Radius Statistics........................................................................................................................ 30
4.4.11 Record Statistics....................................................................................................................... 30
4.5 Network Parameter Config.......................................................................................... 30
4.5.1 Network Config.......................................................................................................................... 30
4.5.2 Static IP Routing Table...............................................................................................................32
4.5.3 ACL White List.......................................................................................................................... 32
4.5.4 ACL Control Config................................................................................................................... 33
4.5.5 VLAN Config............................................................................................................................. 33
4.6 PRI Config..................................................................................................................... 34
4.6.1 PRI Parameter............................................................................................................................. 34
4.6.2 PRI Trunk................................................................................................................................... 36
4.7 SS7 Config......................................................................................................................37
4.7.1 SS7 Parameter.............................................................................................................................37
4.7.2 SS7 Trunk................................................................................................................................... 38
4.7.3 SS7 MTP Link............................................................................................................................ 38
4.7.4 SS7 CIC...................................................................................................................................... 40
4.7.5 SS7 Link Set............................................................................................................................... 41
4.7.6 SS7 CIC Maintain....................................................................................................................... 42
4.8 PSTN Group Config......................................................................................................44
4.8.1 Clock Source...............................................................................................................................44
4.8.2 E1/T1 Parameter......................................................................................................................... 44
4.8.3 Port Number................................................................................................................................45
4.8.4 CoderGroup............................................................................................................................... 46
4.8.5 Dial Plan..................................................................................................................................... 48
4.8.6 Dial Timeout............................................................................................................................... 49
4.8.7 PSTN Profile...............................................................................................................................50
4.8.8 PSTN Group............................................................................................................................... 51
4.8.9 PSTN Group Management..........................................................................................................52
4.9 SIP Config...................................................................................................................... 54
4.9.1 SIP Parameter............................................................................................................................. 54
4.9.2 SIP Trunk.................................................................................................................................... 57
4.9.3 SIP Account................................................................................................................................ 62
4.9.4 SIP DNS......................................................................................................................................64
4.9.5 SIP RED Group.......................................................................................................................... 64

MTG2000B Trunk Gateway User Manual
4
Copyright @ Dinstar 2011-2021
4.10 IP Group Config..........................................................................................................64
4.10.1 IP Profile................................................................................................................................... 65
4.10.2 IP Group....................................................................................................................................66
4.10.3 IP Group Management..............................................................................................................67
4.11 Number Filter.............................................................................................................. 67
4.11.1 Procedures to add a number on the Caller White List.............................................................. 68
4.11.2 Caller Pool................................................................................................................................ 69
4.11.3 Number Bound TsNo................................................................................................................69
4.11.4 Filter Profile.............................................................................................................................. 70
4.12 Call Routing.................................................................................................................71
4.12.1 Routing Parameter.................................................................................................................... 71
4.12.2 PSTN -> IP Routing.................................................................................................................. 71
4.12.3 PSTN -> PSTN Routing........................................................................................................... 73
4.12.4 IP -> PSTN Routing..................................................................................................................74
4.13 Number Manipulation................................................................................................ 75
4.13.1 PSTN -> IP Callee.................................................................................................................... 75
4.13.2 PSTN -> IP Caller..................................................................................................................... 77
4.13.3 PSTN -> PSTN Callee.............................................................................................................. 78
4.13.4 PSTN -> PSTN Caller...............................................................................................................80
4.13.5 IP -> PSTN Callee.....................................................................................................................81
4.13.6 IP -> PSTN Caller..................................................................................................................... 82
4.14 Voice & Fax................................................................................................................. 84
4.15 Encrypt Config............................................................................................................ 86
4.16 Maintenance.................................................................................................................87
4.16.1 Ping Test................................................................................................................................... 87
4.16.2 Tracert Test............................................................................................................................... 87
4.16.3 Signaling Call Test....................................................................................................................88
4.16.4 Network Capture.......................................................................................................................89
4.16.5 Debug Command...................................................................................................................... 89
4.17 Management................................................................................................................ 90
4.17.1 Management Parameter............................................................................................................ 90
4.17.2 Dual MCUCard Parameter........................................................................................................92
4.17.3 Server Parameter.......................................................................................................................93
4.17.4 Cloud Server............................................................................................................................. 93
4.17.5 Mail Server............................................................................................................................... 94
4.17.6 SNMP Parameter...................................................................................................................... 94
4.17.7 Radius Parameter...................................................................................................................... 96
4.17.8 Remote Server...........................................................................................................................98
4.17.9 Data Download......................................................................................................................... 98
4.17.10 Data Restore..........................................................................................................................100
4.17.11 Version Information..............................................................................................................100

MTG2000B Trunk Gateway User Manual
5
Copyright @ Dinstar 2011-2021
4.17.12 Firmware Upgrade................................................................................................................ 101
4.17.13 User Account Management...................................................................................................103
4.17.14 User Group Management......................................................................................................104
4.17.15 Password Modification......................................................................................................... 105
4.17.16 Auto Reset.............................................................................................................................105
4.17.17 Device Restart.......................................................................................................................106
5 Abbreviation....................................................................................................... 107
6 Commands.......................................................................................................... 108
6.1 Commands under en Mode........................................................................................ 108
6.1.1 Login Command....................................................................................................................... 108
6.1.2 Query IP Address......................................................................................................................108
6.1.3 Query Statistics about DTU......................................................................................................108
6.1.4 Query DSP Information............................................................................................................ 109
6.1.5 Query CPU Performance.......................................................................................................... 109
6.1.6 Query SS7 Trunk Status........................................................................................................... 109
6.1.7 Query SS7 Link Statistics......................................................................................................... 110
6.1.8 Query SS7 Call Statistics..........................................................................................................110
6.1.9 Query SS7 Errors...................................................................................................................... 110
6.1.10 Query PRI Trunk Status..........................................................................................................110
6.1.11 Query PRI Link Statistics....................................................................................................... 111
6.1.12 Query PRI Call Statistics........................................................................................................ 111
6.1.13 Query Packet Statistics of HDLC Channel and Related Error Codes.................................... 111
6.1.14 Query Status of E1 Port.......................................................................................................... 112
6.1.15 Query Statistics of All Call..................................................................................................... 112
6.2 Commands under config Mode..................................................................................112
6.2.1 Login Commands......................................................................................................................112
6.2.2 Other Commands...................................................................................................................... 113
6.3 Commands under ada Mode...................................................................................... 113
6.3.1 Login Commands......................................................................................................................113

MTG2000B Trunk Gateway User Manual
6
Copyright @ Dinstar 2011-2021
1Product Description
1.1 Overview
MTG2000B is a new-generation intelligent VoIP gateway, which is designed for
enterprises, telecom operators and various industries. Focusing on a concept of
maintainable, manageable and operable, MTG2000B features high integration and large
capacity. It provides carrier-grade VoIP and FoIP . services, as well as value-added
functions such as modem and voice recognition. Thus it constructs a flexible,
high-efficient, future-oriented communication network for users.
MTG2000B supports a range of signaling protocols, realizing the interconnection
between SIP and traditional signals like SS7 and PRI. It supports multiple codec methods,
offers signal encryption technology and smart voice recognition technology, and improves
the utilizing efficiency of trucking resources while ensuring voice quality. The trunk
gateway is ideally fit for various access networks of SMEs, call centers, telecom operators
and large-scale enterprises.
1.2 Application Scenario
The application scenario of MTG2000B is shown as follows:

MTG2000B Trunk Gateway User Manual
7
Copyright @ Dinstar 2011-2021
1.3 Product Appearance
1.3.1 Image of MTG2000B
Front View
Back View
1.3.2 Description of Ports and Indicators
MTG2000B has two MCU boards and four DTU boards at most, which can be inserted or
pulled out. Each DTU board has four E1/T1 ports (from 0 to 3 in sequence), and there are
indicators to show the status of each E1/T1 port.

MTG2000B Trunk Gateway User Manual
8
Copyright @ Dinstar 2011-2021
MCU Board:
Indicator/Port
Status
Description
PWR
On green
Power supply is normal.
On dull
There is no power supply or power supply is abnormal.
RUN
Flash slowly
The MCU board has been inserted and identified by the
system.
On dull
The system does not identify the MCU board.
CONSOLE
/
The console port used to carry out maintenance-related
configurations, with a baud rate of 115200bps.
GE1
/
The gigabit Ethernet port for services, which is used to
realize the data transmission of signal or voice. Its default
IP address is 192.168.1.111, and default netmask is
255.255.255.0.
GE0
/
The gigabit Ethernet port for network management; its
default IP address is 192.168.11.1, and default netmask is
255.255.255.0.
RST
/
The button is used to restart MTG2000B.
DTU Board:
Indicator/Port
Status
Description
PWR
On green
Power supply is normal .
On dull
There is no power supply or power supply is abnormal.
RUN
Flash slowly
The DTU board has been inserted and identified by the
system.
On dull
The system does not identify the DTU board.
E1/T1
On dull
The corresponding E1/T1 port is not in use.
On green
The corresponding E1/T1 port is connected normally, and
can be used to receive or send data.
Flash
The corresponding E1/T1 port is connected falsely and
there are bit errors.
1.4 Functions and Features
Key Features
Carrier grade hardware design, 1+1 power supply and MCU, hot plug
High-integrated structure, up to 16E1 ports in 1U size

MTG2000B Trunk Gateway User Manual
9
Copyright @ Dinstar 2011-2021
Support flexible dialing rules and operations, allowing users to customize
dialing rules according to different working environments
Support multiple coding standards: G.711A/U, G.723.1, G.729A/B and iLBC
High compatibility, interoperable with PBX of Avaya, NEC and Alcatel, and
also leading soft-switch of Huawei, Cisco and ZTE etc.
Physical Interfaces
E1/T1 Ports
4/8/12/16 E1/T1
DTU Module :
4 E1/T1
Interface Type
RJ48(Impedance 120Ω）
Ethernet Interface
GE1: 10/100/1000 BaseT Adaptive Ethernet
GE0: 10/100/1000 BaseT Adaptive Ethernet
Serial Port
1* RS232, 115200bps
Protocols Supported
SIP v2.0 (UDP/TCP), RFC3261, SDP,RTP(RFC2833), RFC3262, 3263, 3264,
3265, 3515, 2976, 3311
SIP TLS/SRTP
RTP/RTCP, RFC2198, 1889
SIP-T,RFC3372, RFC3204, RFC3398
SIP Trunk Work Mode :Peer/Access
SIP/IMS Registration :with up to 256 SIP Accounts
NAT: Dynamic NAT, Rport
Voice Capabilities
Codecs:G.711a/µ law, G.723.1, G.729A/B, iLBC, AMR
Silence Suppression
Comfort Noise
Voice Activity Detection

MTG2000B Trunk Gateway User Manual
10
Copyright @ Dinstar 2011-2021
Echo Cancellation (G.168),with up to 128ms
Adaptive Dynamic Buffer
Voice ,Fax Gain Control
FAX:T.38 and Pass-through
Support Modem/POS
DTMF Mode: RFC2833/Signal/Inband
Clear Channel/Clear Mode
PSTN
ISDN PRI
23B+D(T1), 30B+D(E1), NT or TE
ITU-T Q.921, ITU-T Q.931, Q.Sig
Signal 7/SS7
ITU-T, ANSI, ITU-CHINA
MTP1/MTP2/MTP3, TUP/ISUP
E1 Frame Type : DF,CRC-4,CRC_ITU
T1 Frame Type :
4-Frame Multi-frame (F4,FT),
2-Frame Multi-frame (F12, D3/4),
Extended Super-frame (F24, ESF) ,
Remote Switch Mode (F72, SLC96)
Line Co. des:
E1:NRZ,CMI,AMI,HDB3
T1:NRZ,CMI,AMI,B8ZS
Clock
Local/Remote Clock Source
Call Features
Flexible Route Methods
PSTN-PSTN, PSTN-IP, IP-PSTN
Intelligent Routing Rules
Call Routing base on Time
Call Routing base on Caller/Called Prefixes

MTG2000B Trunk Gateway User Manual
11
Copyright @ Dinstar 2011-2021
256 Route Rules for each Direction
Caller and Called Number Manipulation
Software Features
Local/Transparent Ring Back Tone
Overlapping Dialing
Dialing Rules，with up to 2000
PSTN group by E1 port or E1 Timeslot
IP Trunk Group Configuration
Voice Codecs Group
Caller and Called Number White Lists
Caller and Called Number Black Lists
Access Rule Lists
IP Trunk Priority
Maintenance
Web GUI Configuration
Data Backup/Restore
PSTN Call Statistics
SIP Trunk Call Statistics
Firmware Upgrade via TFTP/FTP/Web
Network Capture
SNMP v2
Syslog:
Debug, Info, Error, Warning , Notice
Call History Records via Syslog
NTP Synchronization
Centralized Management System
Hardware Specifications & Environment
1+1 Redundancy Power Supply
Power Supply: 100-240VAC, 50-60 Hz

MTG2000B Trunk Gateway User Manual
12
Copyright @ Dinstar 2011-2021
Power Consumption:45W
Operating Temperature:0 ℃~ 45 ℃
Storage Temperature: -20 ℃~80 ℃
Humidity:10%-90% Non-Condensing
Dimensions(W/D/H): 436*300*44.5mm(1U)
Unit Weight: 3.8kg
Compliance: CE, FCC

MTG2000B Trunk Gateway User Manual
13
Copyright @ Dinstar 2011-2021
2Quick Installation
2.1 Preparations before Installation
2.1.1 Attentions for Installation
The attentions for installing MTG2000B include:
To guarantee MTG2000B works normally and to lengthen the service life of the
device, the humidity of the equipment room where MTG2000B is installed
should be maintained at 10%-90% (non-condensing), and temperature should be
0℃~ 45 ℃;
Ensure the equipment room is well-ventilated and clean;
Power supply of MTG2000B should be 100 ~ 240V AC, and its socket is a
three-pin socket which should be grounded well;
It's suggested that personnel who has experience or who has received related
training be responsible for installing and maintaining MTG2000B;
Please wear anti-static wrist strap when installing MTG2000B;
Please do not hot plug or unplug cables;
It's advised to adopt uninterruptible power supply.
2.1.2 Preparations about Installation Site
Equipment Cabinet
Ensure the cabinet is well-ventilated and strong enough to bear the weight of
MTG2000B. It's required that the width of the shelf should be 436mm (19
inches).
Trunk
Ensure telecom operator has approved to open a trunk.
IP Network
Ensure Ethernet PBX or router under IP network has been prepared, since
MTG2000B is connected to the IP network through the standard
10/100/1000M Ethernet port.
Socket
Ensure the socket of MTG2000B is a three-pin socket and power supply is
grounded well.

MTG2000B Trunk Gateway User Manual
14
Copyright @ Dinstar 2011-2021
2.1.3 Installation Tools
Screwdriver
Anti-static wrist strap
Ethernet cables, power wires, telephone wires
Hub, telephone set, fax, and PBX
Terminal (can be a PC which is equipped with hyperterminal simulation
software)
2.1.4 Unpacking
Open the packing container to check whether the MTG2000B device and all accessories
have been in it:
One MTG2000B device
One meter long of power wire (AC 250V/4A)
One network cable
E1/T1 cables (the number of the cables is the same with that of E1/T1 ports)
Serial console cable
2.2 Installation of MTG2000B
2.2.1 Put MTG2000B into Shelf
1. Use screws to fix a flank on the left and the right of MTG2000B respectively;
2. Put the MTG2000B device into the shelf horizontally;
3. Fix the flanks of MTG2000B on the cabinet by using screws.
2.2.2 Connect Ground Cable to MTG2000B
Connect one end of the ground cable to the grounding port on the back of MTG2000B
and then connect the other end to the grounding bar of the shelf.

MTG2000B Trunk Gateway User Manual
15
Copyright @ Dinstar 2011-2021
2.2.3 Connect MTG2000B to Ethernet
MTG2000B has two network ports, namely the gigabit Ethernet port for services (GE1)
and the gigabit Ethernet port for network management (GE0). It is advised to connect
GE1 to the IP network.
Both GE1 and GE0 can be used to carry out management on MTG2000B, but only GE1 is
put in use generally. GE0 is used when there is a need to separate the management on
MTG2000B from the service processing of the MTG2000B.
2.2.4 Connect MTG2000B to PSTN
Generally, a distribution frame needs to be used for the connection between MTG2000B
and PSTN. Firstly, connect one end of E1 cable to one of the E1/T1 ports of MTG2000B,
and then connect other end to the E1 port of the distribution frame. Secondly, connect one
end of cable to the distribution frame, and then connect other end to an exchanger or a
PBX under PSTN.
2.3 Cabling of E1/T1 Port
If there is a need to deploy multiple cables, it had better to make a mark on each cable and
write down IP address and destination port in order to simplify the follow-up connection,
debugging and maintenance.
2.3.1 How to make RJ-48 joint for E1/T1 Cable
1. Prepare a twisted-pair cable with a length of at least 0.6 meters, and then remove the
shuck of the cable as follows:
2. Sequence the lines of the cable according to the following figure.

MTG2000B Trunk Gateway User Manual
16
Copyright @ Dinstar 2011-2021
3. Put the lines into two pins of RJ-48 joint according to the abovementioned sequence of
the lines.
4. Use a RJ-48 wire crimper to crimp the RJ-48 joint.
Note：
Generally, a RJ-48 cable will be provided together with the MTG2000B
device, and users have no need to make RJ-48 joints by themselves.

MTG2000B Trunk Gateway User Manual
17
Copyright @ Dinstar 2011-2021
3Basic Operation
3.1 Configuration of IP Address
The default IP address of GE1 is 192.168.1.111, while that of GE0 is 192.168.11.1.When
GE1 is in use, it’s required that the IP address of GE1 and the IP address of PC are at the
same network segment.
1. Connect the GE1 port of MTG2000B to a PC by using a network cable.
2. Open the TCP/IP Settings interface, click Advanced, and then click Add to add an
IP whose format is 192.168.1.XXX. Or you can open the Internet Protocol (TCP/IP)
interface to modify an existing IP into 192.168.1.XXX.
3.2 Local Maintenance
To ensure easy maintenance, the MTG2000B trunk gateway provides a standard RJ45
console port, which has a Baud rate of 115200bps. Users can log in the MTG2000B to
carry out maintenance-related configurations through the console port.

MTG2000B Trunk Gateway User Manual
18
Copyright @ Dinstar 2011-2021
3.2.1 Example: Log in MTG2000B via Console Port
Step 1: Prepare a serial cable.
Step 2: Connect the F port of the serial cable to the COM port of PC.
If the PC does not have a COM port, please use a USB-to-COM converting line to
connect the serial cable to the PC.
Step 3: Connect the M port of the serial cable to the console port of MTG2000B
Step 4: Conduct configurations on login software.
Herein we take the PuTTY as an example. Detailed configurations are as follows
(COM1 is an example. Please enter correct serial line according to actual
conditions.)
After finishing the above configuration, click the Open button to enter the following
interface.

MTG2000B Trunk Gateway User Manual
19
Copyright @ Dinstar 2011-2021
Enter username and password, which are the same with the username and password of the
Web of MTG2000B. And then you will see a linux platform where you can carry out
maintanance-related configurations.
Note：
For commands to query MTG2000B information, make reference to
Chapter 6.
3.3 Query IP
If you have changed the default IP address of GE1 or GE0 to a new IP address but forget
it, you can carry out the following procedures to query the IP address.
1. Use a serial line to connect the console port of MTG2000B with a PC;
2. Modify the baud rate to 115200;