Dinstar DAG1000-4S4O User manual

Quick Installation Guide
DAG1000-4S4O
DAG2000-8S8O
欢迎您选购DAG系列语音网关产品！
安装设备之前请仔细阅读本安装指导。鼎信通达为客户提供全方位的技术支持，需要更多在线
技术支持，请拨打技术支持热线电话：[phone]。
邮箱：[e-mail] 网址：www.dinstar.cn
注意:
本文档用于为设备安装提供简明快捷的操作指导；更详细的参数说明和配置向导请参照相关用户手册。
Thanks for Choosing Dinstar’s VoIP Gateway!
Please read this guide carefully before installing the gateway. If you need any technical
support ., please contact us
Tel: [phone]
Email: [e-mail]
Website: www.dinstar.com

Product Model & Number of Ports
1
Model
Port Type
DAG1000-4S4O
DAG2000-8S8O 0
1
WAN
3
4
LAN
4
8
FXS
4
8
FXO
Please check the model of your gateway before installation,and then refer to corresponding
installation instructions.
Description of Indicators
2
Indicator Definition Status Description
Power Indicator
Running Indicator
FXO In-use Indicator
On
On
Off
The gateway is powered on
The gateway has no power input
or power supply is abnormal
Off
Slow Flashing
PWR
RUN
FXO
The gateway is running properly
SIP account is registered successfully
The gateway is running improperly
FXO Port is currently occupied
Fast Flashing
FXO Port is idle or faulty Off
Flashing The gateway is properly connected to network
Link (Green) The gateway is not connected to network
or network connection is improper
Off
WAN/LAN
Work at 100Mbps
On
Speed
Work at 10Mbps
Off
Telephone In-use
Indicator
On
Off
FXS
FXS port is currently occupied by a call
FXS port is idle or faulty

Indicators & Interfaces
3
DAG1000-4S4O
DAG2000-8S8O
Power Indicator
Running Indicator
Network Link Indicator
Network Speed Indicator
FXO In-use
Indicator
FXS In-use
Indicator
Power Port
FXS Ports LAN Ports WAN PortReset Button FXO Ports
FXS Ports 0-7
Power Indicator
Running Indicator
FXO In-use
Indicator
FXS In-use
Indicator
FXO Ports 8-15
Power Switch Power Jack LAN Ports Ground Point

RJ11Telephone Line PSTN Line
Telephone PSTN
DC12V Power Plug
Installation Attentions
4
Product model: please check the model of your gateway before installation;
Anti-jamming: to reduce interference, it’s highly recommended that telephone lines and PSTN lines
connected to the gateway should be placed away from power cables;
Power supply: DAG1000-4S4O is equipped with 12VDC power adapter, while DAG2000-8S8O accepts
AC input voltage of 100-240V. Please ensure safe and stable power supply;
Network bandwidth: please ensure there is enough network bandwidth so as to guarantee stabilized
running of the gateway;
Ventilation: to avoid overheating, please do not pile up the gateway with other devices and make sure
the gateway has good ventilation around;
Temperature and humidity: to avoid any accident that might cause malfunction, it’s advised to install the
gateway in an equipment room where temperature and humidity are appropriate;
Mechanical load: It’s highly advised to horizontally place the gateway on a flat surface or a cabinet.
Installation Instructions
5
Connection Diagram for DAG1000-4S4O
Connect gateway with network
Network Cable
PC
ADSL
LAN
Network Cable
Connect FXS port with Telephone line
Connect FXO port with PSTN line
Connect gateway with power input

Telephone
PSTN Line
AC 100-240V
Network Cable
Switch
PC
PSTN
Connection Diagram for DAG2000-8S8O
Connect gateway with network
Network Cable
Connect FXS port with Telephone line
Connect FXO port with PSTN line
RJ11Telephone Line
Connect gateway with power input
Grounding Cable
Ground Point

Modify PC’s IP Address
6
1
To log in the Web Management System of the gateway, you need to modify the IP address
of PC first to make it at the same network segment with the gateway.
Double-click ‘Internet Protocol Version 4 (TCP/IPv4)’.
2
Select ‘Use the following IP address’, and then enter an available IP address
‘192.168.11.XXX’ which is at the same network segment with ‘192.168.11.1’.
3
On the PC, click ‘Network (or Ethernet) → Properties’.

Log in Web Management System
7
Modify Gateway’s IP Address
8
Basic Configurations of FXS
9
If you want to modify the IP address of the DAG gateway, please click ‘Network →
Local Network’ in the navigation tree on the left of the Web Management System,
and then input new IP address and DNS server address on the displayed interface.
Log in the Web Management System of the gateway, and then click SIP Server in the
navigation tree and then enter the address of the SIP server which is to be registered.
Click Save in the last.
Open a web browser and enter the gateway’s IP address (default IP is 192.168.11.1).
Then input username and password in the displayed login GUI. Both the default
username and password are admin.
(1) Configure SIP Server
Click Port in the navigation tree on the left, and then click Add. Input the SIP account
and authentication password assigned by the SIP server.
(2) Configure SIP Account Information
Click Save and then restart the gateway for the new configurations to take effect.

Basic Configurations of FXO
10
(1) Create Port Group
You are advised to divide PSTN lines into several groups and then distribute them to
different port groups. Generally, PSTN lines belonging to a same telecom operator are
distributed to a same port group.
Click , and then click on the displayed interface.Call&Routing →Port Group Add
When calls come from PSTN to the gateway, the offhook auto-dial number is generally
regarded as the DID (Direct-inward-dial) number or destination number of the SIP server.
Click Click to select to select ports for this group, and the following interface will be
displayed.
(2) Create IP Trunk
On the interface, click Add to create an IP trunk which Call & Routing→IP Trunk
connects to a peer SIP server.

(3) Create Outbound Route
On the interface，click Add to create an outbound Call & Routing→<IP→Tel Routing>
route for the IP trunk.
As shown in the following figure, Caller/Callee Prefix is set as ‘any’ and calls from IP
trunk 63<eLA> are routed to port group 15<TELE>.
(4) Create Inbound Route
On the interface, click Add to create an Call & Routing→<Tel→IP/Tel Routing>
inbound route for the IP trunk. As shown in the following figure, Caller Prefix is set as
‘any’ and calls from port group 15<TELE> are routed to IP trunk 63<eLA>.
Configure FXO Parameters
11
On the interface,configure the gateway to detect CID after ring Advanced →FXS/FXO
or before ring,and enable ‘Send Original CID when call from PSTN’.Format of “from”
field is set as ‘CID/CID’ when CID is available,while format of “from” field is set as
‘Display/User ID’ when CID is unavailable.

Basic Operations
12
This document only provides instructions for quick installation and basic configuration,
For detailed configuration and parameter explanation, please make reference to user
manual or ask for online technical support.
More Details
13
深圳市鼎信通达科技有限公司深圳市鼎信通达科技有限公司
官方网址：http://www.dinstar.cn
新浪微博：http://weibo.com/voipdinstar
官方网址：http://www.dinstar.cn
新浪微博：http://weibo.com/voipdinstar
Honest, Concentrated, Innovative, Open
Shenzhen Dinstar Co., Ltd.
Website: http://www.dinstar.com
Facebook: http://www.facebook.com/dinstarvoip/
Dial *158# to query the IP address of LAN port of the gateway;
Dial *159# to query the IP address of WAN port of the gateway;
Dial *114# to query the telephone number of a FXS port;
Dial *165*000000# to restore default IP address, username and password;
Restore factory default settings:
(1) dial *166*000000#;
(2) press the RST button for 7 seconds; then restart by manual;
(3) Log in the gateway and then click ‘Tools → Factory Reset’,then click Apply and
restart the gateway.
Restart the gateway:
(1) Dial *111# to restart the gateway.
(2) Log in Web Management System, click ‘Tools → Restart’ in the navigation tree
on the left, and then click Restart on the displayed interface.