BROSA Mia User manual

ASSEMBLY GUIDE
Mia 4 Seater Dining Table
v1.0

Components
Upon unpacking your dining table from it’s delivery box, you should have the
separate pieces shown below. Follow the steps on the next pages to assemble
your new table.
Hex nut
M8 x 13mm
Cross dowel
M8 x 12 x 60mm
Threaded bolt
M8 x 80mm
Large washer
8.4 x 17 x 1.6mm
Lock washer
8.4 x 2mm
Spanner
Table top x 1
x 1
x 4 x 8
x 8
x 8
x 8
1Leg x 4 2
A
B
C
E
F
D
Item Qty.Description Item Qty.Description

Step 1 1.1 Insert cross dowels (A) into the hole on top of each
leg (2) as shown. Ensure the horizontal marking on
each tting (A) is facing down.
1.2 Screw threaded bolts (B) into ttings (A) that are
concealed in leg (2) as shown. Continue to
re-tighten until bolts (B) are securely fastened.
A x 4
B x 8
Step 1.1
Step 1.2

Step 2
C x 8
D x 8
E x 8
F x 1
2.1 Attach each leg (2) into place by inserting bolts (B)
through the pre-drilled holes of each metal corner
bracket as shown.
2.2 Fit in order the at washer (C), lock washer (D) and
hex nut (E) onto threaded bolts (B) to leg (2).
2.3 Tighten nut (E) using spanner (F) as shown.
Continue to re-tighten hex nuts (E) until they are
securely fastened. Repeat on remaining legs.
Step 2.1
Step 2.2 & 2.3

Step 3 With help of assistant, stand the table upright.
Enjoy your new table!