Dish Network 20.0 User manual

Remote Control
Quick Start Guide
Models 20.0 & 20.1

Done Cancel
Secondary Remote Address
Secondary Remote Address
2
4 Select Done on the screen
3 Press SAT and then RECORD on your remote
The appearance and location
of the SYSTEM INFO button
varies from receiver to receiver
This button is located behind a
door on the front of some
receivers
2 Press SYSTEM INFO on your receiver
PULL
1Remove the PULL tab on the back of your
remote control
Turn On Your Remote

4Press the device power button
Your device will turn on or o
If your device does not turn o or on, return to step 1,
trying a dierent code for the manufacturer of your device
Ensure you are within ten feet of
your device, pointing the remote
control directly at it
3Press #
The device button you selected
will flash three times
See Device Codes in this guide
2Enter the three-digit code for your device
while the device buttons are lit up
1Press and hold the device button you want to
program until all four device buttons light up
Press and hold
∙ TV to pair with your TV
∙ DVD or AUX to pair with
any other device
Pair Your Remote

Explore Your Remote
Device Power
Turn your DISH receiver–
or another device you
are controlling–on or o
Menu
Access your receiver’s
features and settings
Colored Buttons
Access options and
features available on
the current menu
Picture in Picture (PiP)
Control PiP windows
and their orientations
Info
Get more information
about the program
you’re watching or one
you’ve highlighted
Recall
Return to the last channel
you were watching
Input
Change your TV’s input
when in TV mode
Search
Find your favorite TV
shows, movies, and sports

Playback Control
While watching TV, use
these buttons to pause,
rewind, fast-forward,
record, and more
Cancel
Go back one menu
View Live TV
Return to the program
you are watching
DVR
Access your recorded
TV shows and movies
Page Up & Down
Page through menus
such as the Guide
Device Buttons
Change the device you
want to control: SAT
(your DISH receiver), TV,
Blu-ray/DVD player, or
auxiliary device
TV Power
Turn your TV on or o
DISH
Go to the DishHOME
interactive TV app

Device Codes
Bose
Denon
Harman/Kardon
Insignia
JBL
LG
Magnavox
Onkyo
Panasonic
Philips
Pioneer
RCA
Samsung
Sanyo
Sharp
Sony
Toshiba
VIZIO
Westinghouse
Yamaha
Audio 656 780 761 535
Audio 669 762
Audio 640 725
TV 834 538 533 720 539 727 411 751
Audio 642
TV 627 615 505 520 421 733 553 848
TV 560 566 829 747 579 550
Audio 785 671 788
TV 512 876 780 811 577 508 784 765
DVD 627 855 782
Audio 810 799 783 817 643 677 678
TV 747 827 566 550 627 658
DVD 565 801 554 556
TV 547
DVD 719 665 754
Audio 845 664 666 772
TV 831 627 503
TV 680 738 601 004 681 880 727 908
DVD 643 668 900 644 506
TV 590 683 726
TV 628 835 505 178
TV 500 837 590 677
TV 852 757 631
TV 505 523 598 627 720 520
TV 795 553 738 500 720
Audio 786 848
If your device’s code isn’t listed, visit mydish.com/remote-codes
Popular Manufacturer Codes
If you’re pairing an AUX device, precede the three-digit code with
∙ 0for a TV (enter 0500 for code 500)
∙ 1for a DVD or Blu-ray player
∙ 2for any other device

This device complies with Part 15 of FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by following one or more of the following measures:
∙ Reorient or relocate the receiving antenna.
∙ Increase the separation between the equipment and receiver.
∙ Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
∙ Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this device may void your authority to operate this
equipment.
Safety Instructions
You must keep safety in mind while using this device. Keep these and any other
instructions for future reference.
Observe Warnings: Carefully follow all warnings on the device and in the operating
instructions.
Heat: Do NOT place the device near heat sources such as radiators, stoves, heat
registers, or other appliances that produce heat.
Case and Use
Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp
cloth for cleaning.
When Not in Use: Remove the batteries if this device is to be left unattended or
unused for a long period of time.
Refer servicing to qualified personnel when a solid object or
liquid has fallen onto or into the device.
Do NOT attempt to service this device. Refer all servicing to
qualified personnel. Opening covers other than the battery
cover will void the warranty.
WARNING - This product can expose you to Bisphenol A (BPA),
which is known to the State of California to cause birth defects or
other reproductive harm. For more information go to
www.P65Warnings.ca.gov
Regulatory Information

DN011584
Warranty, safety, regulatory, and legal information
can be found at mydish.com/support/remotes
Need Help?
mydish.com/support/products/remotes/20x
1.800.333.DISH (3474)