Dish Network 52.0 User manual

Quick Start Guide
Remote Control
Model 52.0

You will hear three beeps from the
remote control, indicating it has paired
with your DISH receiver
TV AUX input
SAT
4Press the SAT button on the side of the
remote control
2Replace the back cover
PULL
3Open the front panel of your DISH
receiver, and press the SYS INFO button
52.0
1Remove the back cover by pushing the
tab upward, and remove the PULL tab
SYS INFO
Turn On Your Remote

5If desired, pair your remote with an auxiliary
device such as a Blu-ray™player or stereo
4Follow the prompts
TV
Auxiliary
DEVICES
3Select TV and then TV Pairing Wizard
Remote
Control
Sengs
2Select Settings and then Remote Control
AUX
TV
SAT
Back
Options
Info
Apps DVR Guide
Live TV Help
CH
VOL
12abc 3def
4ghi 5jkl
0
tuv wxyz
6 mno
7 pqrs
Select
X
Recall
1Press the home button twice
Pair Your Remote

Explore Your Remote
Also, use the skip
buttons to change tabs
Skip Backward
Press to skip back
10 seconds
Press and hold to
rewind
Device Power
Turn on and o
the device you’ve
selected on the
side of the remote
Back/Live TV
Press to go back
one menu
Press and hold to
go to live TV
Home
Easily find movies,
sports, and shows
that are live, on
your DVR, or on
demand—all in
one place
Options
Access additional
options and features
in the current menu
Back
Options
Apps
Live TV
VOL
12abc
4ghi 5jkl
0
tuv7 pqrs
Select
Recall
Device Buttons
Use your remote as a
universal remote control by
pairing it with your TV and
an auxiliary device such as
a Blu-ray™player or stereo
SAT TV AUX

Info
DVR Guide
Help
CH
2abc 3def
5jkl
0
tuv wxyz
6
mno
Select
Recall
Search
Find your favorite
TV shows, movies,
and sports
Info/Help
Press to get more
information about a
program
Press and hold to
get quick tips on
most screens
Skip Forward
Press to skip forward
30 seconds
Press and hold to
fast-forward
Channel Up & Down
In addition to
changing channels,
use these buttons to
page through menus
such as the Guide
TV Power
When the remote
is paired with your
TV, this button
turns it on and o
Recall
While watching TV,
press to see the
channels you have
watched recently
Input
Change inputs on your TV when
in TV mode
When in SAT mode, use this
button to swap picture-in-
picture or multi-view windows
INPUT

You will hear a series of beeps from your
remote, allowing you to find it
LOCATE
REMOTE
2Press the LOCATE REMOTE button
1Open the front panel of your DISH
receiver
Locate Your Remote Anytime

Refer servicing to qualified personnel when a solid object
or liquid has fallen onto or into the device.
Do NOT attempt to service this device. Refer all servicing to
qualified personnel. Opening covers other than the battery
cover will void the warranty.
This device complies with Part 15 of FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment o and on, the user is encouraged to try to correct the
interference by following one or more of the following measures:
∙ Reorient or relocate the receiving antenna.
∙ Increase the separation between the equipment and receiver.
∙ Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
∙ Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this device may void your authority to operate this
equipment.
Safety Instructions
You must keep safety in mind while using this device. Keep these and any other
instructions for future reference.
Observe Warnings: Carefully follow all warnings on the device and in the operating
instructions.
Heat: Do NOT place the device near heat sources such as radiators, stoves, heat
registers, or other appliances that produce heat.
Case and Use
Cleaning: Do NOT use liquid, abrasive, solvent, or aerosol cleaners. Use a damp
cloth for cleaning.
When Not in Use: Remove the batteries if this device is to be left unattended or
unused for a long period of time.
Regulatory Information
WARNING - This product can expose you to Bisphenol A
(BPA) which is known to the State of California to cause
birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov

DN011580
Press and hold Info/Help
Channel 103
The Hopper Features Guide
mydish.com/support/remotes
Need Help?
Warranty, safety, regulatory, and legal information
can be found at mydish.com/support/remotes