Divis D1 Series User manual

Rev. 1.0
Digital Video Security System
Digital Video Recorder
www.DiViSdvr.com
DiViS DVR.com
*All contents of this document may change without prior notice, and actual product appearance may differ
from depicted herein.
DiViS DVR
Hardware Installation Guide
D1 Series

1 DiViS
www.DiViSDVR.com
1. Specification of HSD1  3
2. Installation Notes  5
2-1. Recommendation for
48016HSD1  5
2-2. Recommendation for
96032HSD1  5
3. Products and Components  6
3-1. DVR Board  6
3-2. Optional Accessories  6
4. Board Description  7
4-1. 48016HSD1  7
4-2. 96032HSD1  8
4-3. I/O Board  10
5. Installation  11
5-1. 48016HSD1 Installation  11
5-1-1. Pigtail Type  11
5-1-2. Back panel Type  12
5-2. 96032HSD1 Installation  13
6. Accessories  15
6-1. RS422/485 Converter  15
Index

2 DiViS
www.DiViSDVR.com
This is a guide book that explains the hardware components and provides a step-by-
step installation of DVR board.
For the software explanation, please refer to “Installation and User’s Guide”.
This guide book is applicable to, among DiViS products, 48016HSD1 & 96032HSD1
board.
The pictures and the name of the products are subject to change; however, the usage
may be similar.
Please contact us through the LiveChat service for any technical questions.
Website: https://divisdvr.com
Introduction

3 DiViS
www.DiViSDVR.com
ㆍ1~16(32) Camera inputs/output
Up to 16 camera inputs are available on screen for digital handling.
- Normal input condition: 75 Ohm, SMPTE 292M
ㆍ1~16 Sensor inputs
Up to 16 sensors can be linked to the system.
- Power supply of DC 12 Volt is required from outside.
ㆍ1~4 Digital outputs (Relay outputs)
Digital Outputs can be used to activate things like shutters and sirens, and activation can be linked to
sensor and motion detection.
ㆍSound recording and Two-way communication capability
Sound can be recorded with video images. Two-way communication is possible between DiViS main
and DiViS-Net.
ㆍDisplay feature (with Multi-viewing)
Multi-Viewing allows 1, 4, 6, 9, 10, 16 different camera shots to be displayed onscreen at the same time.
Other display features include enlarging all displayed cameras or just one.
ㆍPAN/TILT/ZOOM/FOCUS Capabilities
Each connected camera can be manipulated through the DiViS main program as long as each
camera supports such capabilities.
ㆍAuto Rebooting System
When DiViS detects an error or malfunction within the system, it will automatically reboot the
system in order to correct it.
ㆍMotion Detection and Sensor Trigger
Detection features make it possible to record images only when movement is detected, preserving
volume space and maximizing the use of physical storage space.
ㆍScheduled Recording
Scheduling allows the administrator to record images only during designated time periods, if so desired.
Every combination of scheduling is available in the DiViS program.
ㆍManual and Auto Backup
1. S
p
ecification of DiViS HSD1

4 DiViS
www.DiViSDVR.com
Data can be preserved through various formats (DAT, CD, or DVD) and data from specific cameras
and/or time periods can be specifically isolated for backup as well. Much like scheduled recording,
backup of data can be scheduled as well.
ㆍDigitalized Video Search
Recorded data features digital playback for each camera simultaneously or one at a time. Playback
features include advanced search features and image extracting, which allows portions of existing video
to be extracted and saved as a separate file.
ㆍNetwork Support (PSTN, TCP/IP, LAN ,Modem Protocol Support)
DiViS supports network access, which allows administrators to login to DiViS main and remotely access
all the features provided locally.
ㆍPOS, Access Control, ATM Support
Record data from external devices(POS, Access Control, ATM, etc)with DVR video images. Text
Search allows to search data from external devices with DVR video image when event occurs. This will
raise the level of integrity and security
Function Specification
Camera Input 1~16(32) Port (NTSC/PAL)
Sound Input 1, 2, 4, 16, (32) Port
Sensor Input 16 Port
Relay Output 4 Port
Image Format Hardware H.264
Recording Mode Watch, Normal, Motion Detection, Sensor, scheduled Recording
Remote Control Full remote control PSTN, ISDN,ADSL, LAN and TCP/IP
Back-up DAT, CD, DVD
PAN/TILT/ZOOM/FOCUS RS-232/422/485 Interface

5 DiViS
www.DiViSDVR.com
2-1. Recommendation for 48016HSD1
- Recommend to use Intel Chipset mother board.
I) Not compatible with mother boards that are specifically designed such for Small Form Factor
(SFF-Mobile).
- Minimum of Intel Core i3 CPU recommended. (Higher than Clarkdale or Lynnfield)
I) Recommend to use Intel Ivy Bridge Chipset with Intel Core i7 for best results.
- Recommend 4GB or above system memory.
- Recommend Intel Onboard Graphic orATI Graphic.
- Recommend 500GB(32MB Cache) or larger hard disk.
- Support Windows 7 (32 and 64 bit). UserAccount Control (UAC) must be turned off.
- Disable screen saver and Standby mode.
I) Turn off System Standby mode.
II) Turn off Screen saver.
III) Turn off all the energy saving feature.
2-2. Recommendation for 96032HSD1
- Recommend to use Intel Chipset mother board.
I) Not compatible with mother boards that are specifically designed such for Small Form Factor
(SFF-Mobile).
- Minimum of Intel Core i5 CPU recommended.
I) Recommend to use Intel Ivy Bridge Chipset with Intel Core i7 for best results.
- Recommend 4GB or above system memory.
- Recommend Intel Onboard Graphic orATI Graphic.
- Recommend 1TB(64MB Cache) or larger hard disk.
- Support Windows 7 (32 and 64 bit). UserAccount Control (UAC) must be turned off.
- Disable screen saver and Standby mode.
I) Turn off System Standby mode.
II) Turn off Screen saver.
III) Turn off all the energy saving feature.
2. Installation Notes

6 DiViS
www.DiViSDVR.com
3-1. DVR Board
48016HSD1 96032HSD1
3-2. Optional Accessories
SensorPort SensorCable
RS-485 Board USB RS-485 board cable
3. Products and Com
p
onents

7 DiViS
www.DiViSDVR.com
4-1. 48016HSD1
1) TV-Out select Jumper
2) TV-OUT connector
3) Video input connector: Connect video pigtail cable 1-16ch.
4) Audio input connector: Connect audio pigtail cable 1-16ch.
5) Back panel connector: Connect back panel cable 1-4 ch.
6) Back panel connector: Connect back panel cable 5-8 ch.
7) Back panel connector: Connect back panel cable 9-12 ch.
8) Back panel connector: Connect back panel cable 13-16 ch.
9) Factory use
10) I/O Board connector: Connect I/O Board.
11) Extension Relay connector: Connect extension relay.
12) Watchdog connector.
13) Power connector
4. Board Descri
p
tion
5 6
3
4
7
8
8
7
12
13
7 7 9
10
9 11
1
2

8 DiViS
www.DiViSDVR.com
4-2. 96032HSD1
7
1 2
3
4
5
8
6
7
13
11
9 11
12
10
10
9 9
15
16
18
17 14
20 19
22
21
9

9 DiViS
www.DiViSDVR.com
1) TV-Out select Jumper
2) TV-OUT connector
3) Video input connector: Connect video pigtail cable 1-16ch.
4) Audio input connector: Connect audio pigtail cable 1-16ch.
5) Back panel connector: Connect back panel cable 1-4 ch.
6) Back panel connector: Connect back panel cable 5-8 ch.
7) Back panel connector: Connect back panel cable 9-12 ch.
8) Back panel connector: Connect back panel cable 13-16 ch.
9) Factory use
10) I/O Board connector: Connect I/O Board.
11) Extension Relay connector: Connect extension relay.
12) Watchdog connector.
13) Power connector
14) TV-OUT connector
15) Video input connector: Connect video pigtail cable 17-32ch.
16) Audio input connector: Connect audio pigtail cable 17-32ch.
17) Back panel connector: Connect back panel cable 17-20 ch.
18) Back panel connector: Connect back panel cable 21-24 ch.
19) Back panel connector: Connect back panel cable 25-28 ch.
20) Back panel connector: Connect back panel cable 29-32 ch.
21) Video connector
22) Audio connector

10 DiViS
www.DiViSDVR.com
4-3. I/O board
Bottom side Top side
1) I/O Connector: Connect I/O Cable.
2) Board Connector: Connect to the upper I/O board connector of the capture board.
3) Board Connector: Connect to the lower I/O board connector of the capture board.
1 1
2
3

11 DiViS
www.DiViSDVR.com
5-1. 48016HSD1 Installation
5-1-1. Pigtail Type
1) Connect 1~16 channel video pigtail cable to the top connector.
2) Connect 1~16 channel audio pigtail cable to the bottom connector.
3) Connect CCTV monitor.
4) Connect I/O cable to the sensor port.
5) Connect the other side of the I/O cable to the I/O connector.
6) Connect watchdog cable.
(White cable must go left and Black cable must go side
of the connector)
7) Extension Relay connector : Connect extension relay
8) Connect Power cable
5. Installation
5
1
4
3
8
7
6
2
3

12 DiViS
www.DiViSDVR.com
5-1-2. Back panel Type
1) Back panel.
2) Sensor Cable.
3) When connect cable to back panel make sure to leave one pin from each end. White cable should
be faced upside.
4) Connect TV-Out cable to the top pin on back panel. (make sure to have the white cable facing up)
5) Connect the other side of the TV-Out cable to the capture board.
6) Connect the video cable with BNC2 label.
7) Connect the remaining cable with BNC2 label.
8) Connect the video cable with BNC9 label.
9) Connect the remaining cable with BNC9 label.
10) Connect audio pigtail cable.
11) Connect watchdog cable. .
12) Connect Power cable
1
4
5
9
7
3
6
1
8
4
5
10
11
12

13 DiViS
www.DiViSDVR.com
5-2. 96032HSD1 Installation
4
5
1
4
3
8
7
6
2
9
10
10
10 12
10 13
3
11

14 DiViS
www.DiViSDVR.com
1) Connect 1~16 channel video pigtail cable to the top connector.
2) Connect 1~16 channel audio pigtail cable to the bottom connector.
3) Connect CCTV monitor.
4) Connect I/O cable to the sensor port.
5) Connect the other side of the I/O cable to the I/O connector.
6) Connect watchdog cable.
(White cable must go left and Black cable must go side
of the connector)
7) Extension Relay connector : Connect extension relay
8) Connect Power cable
9) Connect 17~32 channel video pigtail cable to the top connector.
10) Connect 17~32 channel audio pigtail cable to the bottom connector.
11) Connect CCTV monitor.
12) Connect video cable to the video port.
13) Connect the other side of the video cable to the video connector.

15 DiViS
www.DiViSDVR.com
6-1. USB to RS 422/485 Converter
PTZ Device Port Convertor
1) Connect to a COM port on system motherboard.
2) Connect the other side of this cable to RS-485 Board.
3) They are power sockets. It requires connection to only one of them.
RS-485 Mode RS-422 Mode
6. Accessories
1 2
3
2