Divis H.264 Series Manual

Rev. 1.0
Digital Video Security System
Digital Video Recorder
www.DiViSdvr.com
Chance-iUSA Corp.
*All contents of this document may change without prior notice, and actual product appearance may differ from
depicted herein.
DiViS DVR - H.264 Series
Hardware Installation Guide

1 DiViS
www.DiViSDVR.com
1. Specification of DiViS  3
2. Products and components  5
2-1. H.264 Series Board  5
2-2. Accessories  6
2-3. Optional Accessories 7
3. Board Description 8
3-1. 12004 H 8
3-2. 24008 H 8
3-3. 48016 H 9
3-4. 96032 H Slave 9
3-5. I/O Board 10
4. Installation 11
4-1. 12004 H 11
4-2. 24008 H 12
4-2-1. Pigtail Type 12
4-2-2. Back Panel Type 13
4-3. 48016 H 14
4-3-1. Pigtail Type 14
4-3-2. Back Panel Type 15
4-4. 96032 H Slave 16
5. Accessories 18
5-1. Back panel 18
5-2. Video and Audio Pigtail Cable 19
5-2-1. Pigtail 4ch and 8ch Cable 19
5-2-2. Pigtail 16ch Cable 20
5-3. Sensor Port 20
5-4. RS-232 to RS-422/485 Converter 21
INDEX

2 DiViS
www.DiViSDVR.com
This is a guide book that explains the hardware components and provides a step-by-step
installation of DVR board.
For the software explanation, please refer to “Installation and User’s Guide”.
This guide book is applicable to, among DiViS products, 12004H, 24008H, 48016H and
96032H Slave boards.
The pictures and the name of the products are subject to change; however, the usage may
be similar.
For any questions you might have, please contact us through the Service Request form
available online.
When submitting your concerned matter, please include your company name and phone
number with detailed descriptions.
Service Request Link: http://www.divisdvr.com/divis/sp_service.asp
Website: http://www.divisdvr.com
Preface

3 DiViS
www.DiViSDVR.com
1~32 Camera Inputs / Output
Up to 32 camera inputs are available on screen for digital handling.
Normal input condition: 75 Ohm, 1 Volt (p-p)
1~32 Sensor Inputs
Up to 32 sensors can be linked to the system
External DC 12 Volt power must be provided to the sensor input from outside.
1~8 Digital Outputs (Relay Outputs)
Digital Outputs can be used to activate things like shutters and sirens, and activation can be linked to sensor
and motion detection.
Sound Recording and Two-Way Communication Capabilities
Sound can be recorded with video images. Two-way communication is possible between DiViS Main
and DiViS Net.
Display Features (w/ Multi-Viewing)
Up to 1, 4, 6, 9, 10, 16 or 32 different camera shots to be displayed onscreen at the same time.
Other display features include enlarging all displayed cameras or just one.
PAN/TILT/ZOOM/FOCUS Capabilities
Each connected camera can be manipulated through the DiViS main program as long as each camera
supports such capabilities.
Auto Rebooting System
When DiViS detects an error or malfunction within the system, it will automatically reboot the system in order
to correct it.
Motion Detection and Sensor Trigger
Detection features make it possible to record images only when movement is detected, preserving volume
space and maximizing the use of physical storage space.
Scheduled Recording
Scheduling allows the administrator to record images only during designated time periods, if so desired.
Every combination of scheduling is available in the DiViS program.
1. S
p
ecification of DiViS

4 DiViS
www.DiViSDVR.com
Data Backup and Auto Backup
Data can be preserved through various formats (DAT, CD, or DVD) and data from specific cameras and/or
time periods can be specifically isolated for backup as well. Much like scheduled recording, backup of data
can be scheduled as well.
Digitalized Video Search
Recorded data features digital playback for each camera simultaneously or one at a time. Playback features
include advanced search features and image extracting, which allows portions of existing video to be
extracted and saved as a separate file.
Network Support (PSTN, TCP/IP, LAN , Modem Protocol Support)
DiViS supports network access, which allows administrators to login to DiViS main and remotely access all
the features provided locally.
POS, Access Control, ATM Support
Data from external devices (POS, Access Control, ATM, etc) can be recorded with DVR video images. Text
Search allows to search data from external devices with DVR video image when event occurs. This will raise
the level of integrity and security.
* Note: 96032H consists of one of 48016H and 96032H Slave
Feature 12004H 24008H 48016H 96032H Slave
Camera Input 1~4Port(NTSC/PAL) 1~8Port(NTSC/PAL) 1~16 Port (NTSC/PAL) 1~32 Port (NTSC/PAL)
Sound Input 1~4Port 1~8Port 1~16 Port 1~32 Port
Sensor Input 1~4Port 1~16Port 1~16 Port 1~32 Port
Relay Output 1~4Port 1~4Port 1~4 Port 1~8 Port
Composite Output 1 Port (NTSC/PAL, Normal)
Image Format H.264
Recording Mode Watch, Normal, Motion Detection, Sensor, scheduled Recording
Remote Control Full remote control PSTN, ISDN,ADSL, LAN and TCP/IP
Back-up DAT, CD, DVD
PAN/TILT/ZOOM/FOCUS RS-232/422/485 Interface

5 DiViS
www.DiViSDVR.com
2-1. H.264 Series Board
12004H 24008H
48016H 96032H Slave
2. Product and Com
p
onents

6 DiViS
www.DiViSDVR.com
2-2. Accessories
4ch Video & Audio Pigtail Cable 8ch Video Pigtail Cable 8ch Audio Pigtail Cable
16ch Video Pigtail Cable 16ch Audio Pigtail Cable Reset Cable
Sensor & Relay Cable Sensor Board

7 DiViS
www.DiViSDVR.com
2-3. Optional Accessories
RS-485 Board RS-485 Board (for 32ch) RS-232CCable
I/O Board Sensor & Relay Cable Sensor Board Video Cable
Back Panel TV-OUT cable 1(for 32ch) TV-OUTcable2(for 32ch)

8 DiViS
www.DiViSDVR.com
3-1. 12004H
TV OUT Connector I/O Connector
VideoandAudio Factoryuse Watchdog
Connector
3-2. 24008H
TVOUTSelect TVOut(spot) TVOut(split) ExtensionRelay
Jumper Connector Connector connector
Camera
1 ~ 8
Audio
1 ~ 8
BackPanel BackPanel Factory use Watchdog
1~4 5~8
3. Board Descri
p
tion
I/O Board Connect

9 DiViS
www.DiViSDVR.com
3-3. 48016H
TVOUTSelect TVOut(spot) TVOut(split) ExtensionRelay
Jumper Connector Connector connector
Camera
1 ~ 8
Audio
1 ~ 8
BackPanel Factory use Watchdog
Connector
3-4. 96032H Slave
TVOUTSelect TVOut ExtensionRelay
Jumper Connector connector
Camera
17 ~ 32
Audio
17 ~ 32
BackPanel Factory use
Connector
I/O Board Connect
1 ~ 4
5 ~ 8
9 ~ 12
13 ~ 16
I/O Board Connect
17 ~ 20
21 ~ 24
25 ~ 28
29 ~ 32

10 DiViS
www.DiViSDVR.com
3-5. I/O Board

11 DiViS
www.DiViSDVR.com
4-1. 12004H
1) Connect 1~4 channel video pigtail cable to connector.
2) Connect 1~4 channel audio pigtail cable to connector.
3) Connect CCTV monitor.
4) Connect the other side of the I/O cable to the I/O connector
5) Connect I/O cable to the sensor port
6) Connect watchdog cable. (Black cable must go bottom of the connector)
4. Installation
1
2
3
5
4
6

12 DiViS
www.DiViSDVR.com
4-2. 24008H
4-2-1. Pigtail type
1) Connect 1~8 channel video pigtail cable the top connector.
2) Connect 1~8 channel audio pigtail cable to the bottom connector.
3) Connect CCTV monitor.
4) Connect the other side of the I/O cable to the I/O connector.
5) Connect I/O cable to the sensor port.
6) Connect watchdog cable. (Black cable must go bottom of the connector)
1
2
3 4
5
6

13 DiViS
www.DiViSDVR.com
4-2-2. Back Panel Type
1) Back Panel.
2) Sensor Cable.
3) With white cable facing up, connect video cables to back panel leaving just one bottom pin.
4) Connect TV-Out cable to the top pin of back panel. (make sure the white cable is facing up)
5) Connect the other side of the TV-Out cable to the capture board.
6) Connect the video cable labeled BNC2 here.
7) Connect the remaining cable labeled BNC2 here.
8) Connect audio pigtail cable.
9) Connect watchdog cable. (Black cable must go to the bottom of the connector)
2
1 1
6
7
3 4
8 5
3
8
9

14 DiViS
www.DiViSDVR.com
4-3. 48016H
4-3-1. Pigtail type
1) Connect 1~16 channel video pigtail cable to the top connector.
2) Connect 1~16 channel audio pigtail cable to the bottom connector.
3) Connect CCTV monitor.
4) Connect I/O cable to the sensor port.
5) Connect the other side of the I/O cable to the I/O connector.
6) Connect watchdog cable. (Black cable must go bottom of the connector)
1
2
3
4
5
6

15 DiViS
www.DiViSDVR.com
4-3-2. Back Panel Type
1) Back Panel.
2) Sensor Cable.
3) With white cable facing up, connect video cables to back panel leaving just one bottom pin..
4) Connect TV-Out cable to the top pin of back panel. (make sure the white cable is facing up)
5) Connect the other side of the TV-Out cable to the capture board.
6) Connect the video cable labeled BNC2 here.
7) Connect the remaining cable labeled BNC2 here.
8) Connect the video cable labeled BNC9 here.
9) Connect the remaining cable labeled BNC9 here.
10) Connect audio pigtail cable.
11) Connect watchdog cable. (Black cable must go to the bottom of the connector)
2
1 1
6
7
8
9
3 4
8 5
3
10
11

16 DiViS
www.DiViSDVR.com
4-4. 96032H
1
5
2
3
4
7
10
8
6
9
11
5
6
8
9
7
10

17 DiViS
www.DiViSDVR.com
1) Connect 1~16 channel video pigtail cable to the top connector of the master board.
2) Connect 1~16 channel audio pigtail cable to the bottom connector of the master board.
3) Connect 17~32 channel video pigtail cable to the top connector of the slave board.
4) Connect 17~32 channel audio pigtail cable to the bottom connector of the slave board.
5) Connect TV-out cable to the master board.
6) Connect the other side of the TV-out cable to the master connector on TV-Out board.
7) Connect TV-out cable to the slave board.
8) Connect the other side of the TV-out cable to the slave connector on TV-Out board.
9) Make sure to have the white cable of the TV-out cable facing up on the TV-Out board.
10) Make sure to have the white cable of the TV-out cable facing down on the Slave board.
11) Connect the watchdog cable. Make sure to have the black cable facing down.

18 DiViS
www.DiViSDVR.com
5-1. Back Panel
Sensor & Relay (Digital I/O)
Sensor Input 0~15 1~16
Input Common 0~1 17, 18
Relay Output 0~3 19~22
Output Common 0~1 23, 24
Camera I/O
Camera Ground 3, 5, ~ 31, 33
Camera Signal 4, 6, ~ 32, 34
TV Out Ground 1
TV Out Signal 2
5. Accessories

19 DiViS
www.DiViSDVR.com
5-2. Video and Audio Pigtail cable
5-2-1. Video and Audio Pigtail 4ch, 8ch cable
Video Pigtail cable Audio Pigtail cable
1~4 BNC : Black BNC 1 : Blue con
2:Yellowcon
3 : Green con
4 : Red con
Video Pigtail cable Audio Pigtail cable
1~4 BNC : Black BNC 1 : Blue con 5 : Gray con
5~8 BNC : White BNC 2 : Yellow con 6 : Purple con
3 : Green con 7 : White con
4 : Red con 8 : Orange con