Divis MPG48016AMX Assembly instructions

Rev. 1.1
Digital Video Security System
Digital Video Recorder
www.DiViSdvr.com
Chance-iUSA Corp.
*All contents of this document may change without prior notice.
DiViS DVR - AMX Series
Hardware Installation Guide

1 DiViS
www.DiViSDVR.com
1. Specification of DiViS  3
2. Products and components  5
2-1. DVR Board  5
2-2. Accessories  5
2-3. Optional Accessories 5
3. Board Description 6
3-1. DiViS MPG48016AMX 6
3-2. DiViS MPG96032AMX Slave 6
3-3. I/O Board 7
4. Installation 8
4-1. DiViS-MPG48016AMX 8
4-1-1. Pigtail Type 8
4-1-2. Back Panel Type 9
4-2. DiViS-MPG96032AMX 11
5. Accessories 12
5-1. Back panel 12
5-2. Video and Audio Pigtail Cable 13
5-3. Sensor Port 13
5-4. RS-232 to RS-422/485 Converter 14
5-5. PORT Converter 15
5-5-1. Specification 15
5-5-2. Layout Description 15
5-5-3. Baud Rate 16
5-5-4. Jumper Selection 16
INDEX

2 DiViS
www.DiViSDVR.com
This is a guide book that explains the hardware components and provides you the step by step
installation of DVR board.
For the software explanation, please refer to “Installation and User’s Guide”.
This guide book is applicable to, among DiViS products, DiViS MPG48016AMX and DiViS
MPG96032AMX.
The pictures and names of the products are subject to change depending on hardware
upgrade. However, the usages may be similar.
For any question you have, please contact to the following address. When you are sending
your concerned matter, please include your company name and phone number with detail
description.
E-mail: [email protected]
Tel: [phone]
Fax: [phone]
www.divisdvr.com
Preface

3 DiViS
www.DiViSDVR.com
1~32 Camera Inputs / Output
Up to 32 camera inputs are available on screen for digital handling.
Normal input condition: 75 Ohm, 1 Volt (p-p)
1~32 Sensor Inputs
Up to 32 sensors can be linked to the system
External DC 12 Volt power must be provided to the sensor input from outside.
1~8 Digital Outputs (Relay Outputs)
Digital Outputs can be used to activate things like shutters and sirens, and activation can be linked to sensor
and motion detection.
Sound Recording and Two-Way Communication Capabilities
Sound can be recorded with video images. Two-way communication is possible between DiViS Main
and DiViS Net.
Display Features (w/ Multi-Viewing)
Up to 1, 4, 6, 9, 10, 16 or 32 different camera shots to be displayed onscreen at the same time.
Other display features include enlarging all displayed cameras or just one.
PAN/TILT/ZOOM/FOCUS Capabilities
Each connected camera can be manipulated through the DiViS main program as long as each camera
supports such capabilities.
Auto Rebooting System
When DiViS detects an error or malfunction within the system, it will automatically reboot the system in order
to correct it.
Motion Detection and Sensor Trigger
Detection features make it possible to record images only when movement is detected, preserving volume
space and maximizing the use of physical storage space.
Scheduled Recording
Scheduling allows the administrator to record images only during designated time periods, if so desired.
Every combination of scheduling is available in the DiViS program.
1. S
p
ecification of DiViS

4 DiViS
www.DiViSDVR.com
Data Backup and Auto Backup
Data can be preserved through various formats (DAT, CD, or DVD) and data from specific cameras and/or
time periods can be specifically isolated for backup as well. Much like scheduled recording, backup of data
can be scheduled as well.
Digitalized Video Search
Recorded data features digital playback for each camera simultaneously or one at a time. Playback features
include advanced search features and image extracting, which allows portions of existing video to be
extracted and saved as a separate file.
Network Support (PSTN, TCP/IP, LAN , Modem Protocol Support)
DiViS supports network access, which allows administrators to login to DiViS main and remotely access all
the features provided locally.
POS, Access Control, ATM Support
Data from external devices (POS, Access Control, ATM, etc) can be recorded with DVR video images. Text
Search allows to search data from external devices with DVR video image when event occurs. This will raise
the level of integrity and security.
* Note: MPG96032AMX consists of one of MPG48016AMX and MPG96032AMX Slave
Feature MPG48016AMX MPG96032AMX
Camera Input 1~16 Port (NTSC/PAL) 1~32 Port (NTSC/PAL)
Sound Input 1~16 Port 1~32 Port
Sensor Input 1~16 Port 1~32 Port
Relay Output 1~4 Port 1~8 Port
Composite Output 1 Port (NTSC/PAL, Normal)
Image Format MPEG4
Recording Mode Watch, Normal, Motion Detection, Sensor, scheduled Recording
Remote Control Full remote control PSTN, ISDN,ADSL, LAN and TCP/IP
Back-up DAT, CD, DVD
PAN/TILT/ZOOM/FOCUS RS-232/422/485 Interface

5 DiViS
www.DiViSDVR.com
2-1. DiViS AMX Series Board
DiViS MPG48016AMX DiViS MPG96032AMX Slave
2-2. Accessories
Video Pigtail Cable Sound Pigtail Cable Reset Cable
2-3. Optional Accessories
RS-485 Board Sensor Port I/O board
RS-232C Cable Sensor & Relay Cable Back Panel Video Cable
2. Product and Com
p
onents

6 DiViS
www.DiViSDVR.com
3-1. DiViS MPG 48016AMX
3-2. DiViS MPG 96032AMX Slave
3. Board Descri
p
tion

7 DiViS
www.DiViSDVR.com
3-3. I/O board

8 DiViS
www.DiViSDVR.com
4-1. DiViS MPG48016AMX
4-1-1. Pigtail type
1) Connect 1~16 channel video pigtail cable to the top connector.
2) Connect 1~16 channel audio pigtail cable to the bottom connector.
3) Connect CCTV monitor.
4) Connect I/O cable to the sensor port.
5) Connect the other side of the I/O cable to the I/O connector.
6) Connect watchdog cable. (Black cable must go bottom of the connector)
4. Installation
3
1
5
4
6
2

9 DiViS
www.DiViSDVR.com
4-1-2. Back Panel Type
1) Back Panel.
2) Sensor Cable.
3) When connecting video cables to back panel, make sure to leave the bottom pin on the back panel and
have white cables facing up.
4) Connect the video cable with BNC2 label.
5) Connect the remaining cable with BNC2 label.
6) Connect the video cable with BNC9 label.
7) Connect the remaining cable with BNC2 label.
8) Connect audio pigtail cable.
9) Connect watchdog cable. (Make sure to have the black cable facing down)
1
2
1
4
5
6
7
9
3
8

10 DiViS
www.DiViSDVR.com
4-2. DiViS MPG96032AMX

11 DiViS
www.DiViSDVR.com
1) Connect 1~16 channel video pigtail cable to the top connector of the master board.
2) Connect 1~16 channel audio pigtail cable to the bottom connector of the master board.
3) Connect 17~32 channel video pigtail cable to the top connector of the slave board.
4) Connect 17~32 channel audio pigtail cable to the bottom connector of the slave board.
5) Connect TV-out cable to the master board.
6) Connect the other side of the TV-out cable to the master connector on TV-Out board.
7) Connect TV-out cable to the slave board.
8) Connect the other side of the TV-out cable to the slave connector on TV-Out board.
9) Make sure to have the white cable of the TV-out cable facing up on the TV-Out board.
10) Make sure to have the white cable of the TV-out cable facing down on the Slave board.
11) Connect the watchdog cable. Make sure to have the black cable facing down.

12 DiViS
www.DiViSDVR.com
5-1. Back Panel
Sensor & Relay (Digital I/O)
Sensor Input 0~15 1~16
Input Common 0~1 17, 18
Relay Output 0~3 19~22
Output Common 0~1 23, 24
Camera I/O
Camera Ground 3, 5, ~ 31, 33
Camera Signal 4, 6, ~ 32, 34
TV Out Ground 1
TV Out Signal 2
5. Accessories

13 DiViS
www.DiViSDVR.com
5-2. Video and Audio Pigtail cable
VideoPigtailcable AudioPigtailcable
1 ~ 4 : Blue BNC 1, 9 : Red con 5, 13 : Blue con
5 ~ 8 : Orange BNC 2, 10 : Orange con 6, 14 : Violet con
9 ~ 12 : Violet BNC 3, 11 :Yellow con 7, 15 : Gray con
13 ~ 16 : Gray BNC 4, 12 : Green con 8, 16 : White con
5-3. Sensor Port
Sensor port pin number
1 ~ 8, 9 ~ 16 : Signal input
G : Ground
4, 3, 2, 1 : Relay output

14 DiViS
www.DiViSDVR.com
5-4. RS232 to RS422/485 Converter
1) Connect to system’s Com port.
2) Connect to PTZ port converter RS-485 + TV-OUT board
3) Connect a power source to any one of these power sockets.
4) TV-Out Connection for 32 Channel board only. Refer to the installation diagram on Chapter 4-2
Dip Switches
RS-485 Mode RS-422 Mode
1 2
3
3
4
4
4
5Signal
4
+ RxData3- RxData
2+ TxData1- TxData 4
* Use Rx+ and Rx-
for RS 485 method.

15 DiViS
www.DiViSDVR.com
5-5. PORT Converter
5-5-1. Specification
RS-232 from POS DB9 Female
Input Parallel Port from POS DB25 Male
RS-232 to Printer DB9 Male
Serial RS-485(S) to DVR TX(+)(-), RX(+)(-), GND
Parallel Port to Printer DB25 Female
RS-232 to DVR DB9 Male
Output Parallel
RS-485(P) to DVR TX(+)(-), RX(+)(-), GND
Power DC 5V
RS-232 from POS DB9 Female to DB9 Male Direct
RS-485(S) to DVR DB9 Female to DB9 Female Cross
Serial
RS-485(P) to DVR DB9 Female to DB9 Female Cross
Parallel Port from POS DB25 Male to DB25 Female Direct
Cable
Parallel Parallel Port to Printer DB25 Female to IEEE 1284
5-5-2. Layout Description
1, DC IN 5V
2, Rs-232 From POS : Connect to the serial port in POS
3, Baud rate : Select the Baud rate
4, Parallel Port from POS : Connect to the parallel port in POS
5, Parallel Port to Printer : Used by Parallelprinter
6,RS-232toDVR:UsedbySerialportinDVR
7, RS-485(P) to DVR : Used by RS-485 board in DVR
8, Rs-232 to Printer : Used by Serial Printer

16 DiViS
www.DiViSDVR.com
9, Rs-485(S) to DVR : Used by RS-485 board in DVR
10, Terminal Block
(1): TX-
(2):TX+
(3):RX-
(4):RX+
(5):GND
11, SW1, SW2: Used in output of Parallel port 12, SW3, SW4: Used in output of Serial
5-5-3. Baud Rate
5-5-4. Jumper Selection
Output of parallel port Output of serial port