Dogtra 2700T&B User manual

2700T&B
AVAILABLE IN 2-DOG SYSTEM: 2702T&B
Owner's Manual
Please read this manual thoroughly
before operating the Dogtra 2700T&B or 2702T&B
Training & Beeper Collar.
1

23
THANK YOU FOR PURCHASING
THE WORLD’S FINEST E-COLLAR
2700T&B Training & Beeper Collar
The 2700T&B Series remote training system will give
you the ability to keep track of your dog’s location when
he/she is out of sight or on point.
The 2700T&B Series is also a training collar that can be
used for behavior management.
The Dogtra Training & Beeper collars are waterproof,
lightweight, and reliable. They are built to withstand the
most rugged conditions that your dog may encounter.
The use of microcomputer technology, digital circuity,
and lithium polymer batteries make both the collar and
transmitter compact and very reliable.
PRODUCT SAFETY AND HEALTH
STATEMENTS
Proper E-Collar Use
Dogtra e-collars are intended for the sole purpose of
behavior modification of dogs. They are not intended
for human use or use on other animals. Dogtra does
not assume any liability for improper use of the Dogtra
e-collar.
Aggressive Dogs
Dogtra does not recommend using the e-collar to
correct dogs that are aggressive towards other dogs
or people. In many cases, the dog will associate the
stimulation with the other dog or individual and become
even more aggressive. Dog aggression is best treated by
a dog-training specialist.
Interference With Other Electronic Devices
Dogtra’s industry-leading technology filtering system
ensures minimal interference with other electronic
devices (garage door openers, pacemakers, etc.). Our
digital microprocessor offers thousands of unique codes
to eliminate frequency match-up with other Dogtra
e-collars.
Inadvertent Activation
If the Constant button is held down for 12 seconds
or more, the unit will automatically shut down. It will
reactivate when the button is released.

45
AT A GLANCE
Optional Accessories
Auto Charger
Dogtra’s auto chargers are designed for use with a
10 volt car outlet.
European Charger
Dogtra’s European chargers are designed for use with a
230 volt AC electrical outlet.
To purchase accessories, please visit www.dogtra.com or
call customer service at 1-888-811-9111.
CONTENTS
AT A GLANCE ..................................................................
MAIN FEATURES .............................................................
OVERVIEW .......................................................................
UNDERSTANDING YOUR TRAINING SYSTEM
1. TURNING THE 2700T&B ON/OFF .......................
2. TRANSMITTER BUTTON FUNCTION ..................
3. BEEPER SOUND .......................................................
4. BEEPER VOLUME ADJUSTMENT .......................
5. COLLAR FITTING .....................................................
6. FINDING THE RIGHT STIMULATION ..................
7. FAMILIARIZING THE DOG TO THE BEEPER .....
8. MAXIMIZING THE DISTANCE ...............................
9. LED INDICATOR .......................................................
10. BATTERY CHARGER .............................................
11. CHARGING THE BATTERY ....................................
12. HANDHELD TRANSMITTER LCD ........................
13. ATTACHING THE BELT CLIP ................................
14. USING THE TEST LIGHT ......................................
GENERAL TRAINING TIPS ............................................
MAINTENANCE ...............................................................
TROUBLESHOOTING GUIDE .......................................
WARRANTY AND REPAIR INFORMATION ..............
5
6
8
11
13
16
17
18
19
19
20
21
22
23
25
27
28
31
33
34
37
Splitter
Cable
Test Light
Battery
Charger
Belt Clip
Receiver/
Collar
Owner's
Manual
Transmitter

67
• One-charging system allows the transmitter and
receiver(s) to be charged at the same time
• Over 8000 different identity codes to prevent signal
match-up with other e-collars
• Easily visible blue LCD screen displays the exact level
of stimulation that can be seen in the dark
• A three bar battery life indicator and LED colored
indicator to show the remaining battery life
• Easy-to-use, ergonomically fitted transmitter
• Rheostat Dial that allows for gradual adjustments in
stimulation intensity with no jumps between levels
(0-127)
• Two-dog models allow the trainer to control two
different dogs from one transmitter
• 1-mile range
• 2 different stimulation types - Nick & Constant
• New High Performance Pager (HPP) vibration feature
• New advanced Accelerometer run/point sensor
• The freedom to choose between a high and low tone
beeper (single-dog unit only)
• Three beeper modes - Run/Point, Point-Only, and
Locate
• Innovative beeper volume control that lets you select
between 2 different tones and 3 volume levels for each
tone
• Combines the receiver with the beeper horn into one
small, compact unit
• 2-hour rapid charge lithium polymer batteries
• Fully waterproof receiver/collar and transmitter
• No bothersome external antenna on the receiver/collar
MAIN FEATURES

89
OVERVIEW
Nick
Constant
Rheostat Dial
Antenna
On/Off
Switch &
Mode
Belt Clip
Battery Charging
Receptacle &
Rubber Plug
On/Off Magnetic
Red Dot
LCD
Screen
Beeper Tone
Toggle Switch Locate
LED
Indicator
Light
Pager
Locate
Pager
2700T&B 1-Dog
Transmitter
2702T&B 2-Dog
Transmitter
Nick
Constant
Belt Clip
Battery Charging
Receptacle &
Rubber Plug
On/Off Magnetic
Red Dot
LCD
Screen
Dog Collar
Toggle Switch On/Off
Switch &
Mode
Rheostat Dial
Antenna
LED
Indicator
Light

10 11
1. Turning the 2700T&B On/Off
To turn the handheld transmitter on, hold down the
button on the right side of the transmitter until the LCD
screen illuminates. To turn the transmitter off, hold down
the same button on the right side of the transmitter until
the LCD screen shuts off.
UNDERSTANDING YOUR
TRAINING SYSTEM
On/Off
Button
Collar Strap
Battery Charging
Receptacle
and Rubber Plug
LED Indicator Light
On/Off Magnetic Switch
(Red Dot)
Contact
Points
2700T&B, 2702T&B
Receiver/Collar

12 13
The transmitter for the 2700T&B Series has five buttons
(two on the face of the transmitter, two on the left side,
and one on the right side).
Nick Button
When the Nick button is pushed, the receiver emits a
single rapid pulse of electrical stimulation.
Constant Button
Pressing the Constant button gives continuous
stimulation as long as the button is pushed, for up to 12
seconds. If the button is not released after 12 seconds,
the stimulation will automatically turn off as a safety
feature. The collar will be ready to be reactivated once
the button has been released.
2. Transmitter Button Function
2700T&B
Beeper Tone
Toggle Switch
Nick
Locate
Pager
On/Off
Switch &
Mode
Constant
Beeper Tone
Toggle Switch
Receiver On/Off Magnetic Red Dot
To turn on the receiver/collar, place the magnetic red
dot on the back of the transmitter to the red dot on
the receiver/collar. Hold the two red dots together for a
moment until the LED light on the receiver/collar comes
on. The receiver/collar will emit a melody when turned on.
To turn off the unit, repeat the same procedure holding
the two red dots together momentarily. The LED light will
turn red for a brief moment indicating that the receiver/
collar has now shut off. The receiver/collar will emit a
melody when turned off.

14 15
Locate Button
The Locate button is located on the left side. It causes
the collar’s beeper horn to emit a series of beeps when
held down and gives you the ability to keep track of your
dog’s location. On one-dog models, the beeper can be
adjusted between high and low tones.
Note: The high/low tone is not an option on two dog
units. On two-dog models, the green collar emits the
high tone and the orange collar emits the low tone
automatically. The tones cannot be changed.
Pager Button
The Pager button is located on the left side of the
transmitter. Pressing it will give a vibration for as long as
the button is pressed, for up to 12 seconds.
Mode Button
Your 2700T&B has three different modes: Locate, Run/
Point, and Point-Only. The Locate mode can be activated
at any time, even when another mode is set, by pressing
the top orange button labeled Locate on the left side
of the transmitter. To set the beeper unit to Run/Point
and Point-Only mode, press the black Mode button. This
button is located on the right side of the transmitter.
2702T&B
The two-dog model has a toggle switch on the face
of the transmitter located above the Nick button. The
toggle switch allows for selection of either collar.
Dog Collar
Toggle Switch
Dog Collar
Toggle Switch
Nick
Locate
Pager
On/Off
Switch &
Mode
Constant
Set the toggle switch on the green position to select the
green collar and the orange position to select the orange
collar. The stimulation (Nick and Constant) along with
the beeper and Locate modes will only operate when
the toggle is in the desired position for the appropriate
receiver/collar.

16 17
When you press the Mode button the first time, the collar
will beep twice. The beeper unit will always start in Run/
Point mode. The beeper will sound every 7 seconds while
the dog is running, and every 2 seconds when the dog
is on point or becomes stationary. The second time you
push the Mode button, it will beep once and remain silent
while the dog is running and beep every 2 seconds when
the dog is on point or stationary.
To turn the beeper unit off, press the Mode button a third
time. The unit will emit three rapid beeps, and the beeper
will turn off. The Locate mode can still be used!
When the 2700T&B toggle switch is set on low tone, the
beeper will emit a double beep when it is in Run/Point
mode or Point-Only mode. If the toggle switch is set on
the high tone, a single beep will sound when using Run/
Point or Point-Only mode.
Note: The Locate button can be used in any mode you
are in.
3. Beeper Sound 4. Beeper Volume Adjustment
The beeper volume level for the Run/Point mode and
Point-Only mode can be increased or decreased by
holding the Locate button down and briefly pushing
the Pager button. The tone of the beeper can be
selected with a toggle switch located on the face of
the transmitter. There are two beeper tones: High (H1 =
lowest volume, H2 = medium volume, and H3 = highest
volume) and Low (L1 = lowest volume, L2 = medium
volume, and L3 = highest volume).
Note: The Locate beeper volume is not
adjustable; it is always on the highest level, L3 on low
tone, or H3 on high tone.
Toggle Switch
High LCD Displays
Toggle Switch
Low LCD Displays
Press Pager 1st Time
(While holding down
the Locate button)
H1 L1
Press Pager 2nd Time
(While holding down
the Locate button)
H2 L2
Press Pager 3rd Time
(While holding down
the Locate button)
H3 L3
Initial Beeper
Sound Mode Action
Press
1st Time 2 Beeps Run/Point
Mode
- Dog running/moving: emits
double beep every 7 seconds
- Dog stationary/pointing: emits
double beep every 2 seconds
Press
2nd Time 1 Beep Point-Only
Mode
- Dog running/moving: silent
- Dog stationary/pointing: emits
double beep every 2 seconds
Press
3rd Time 3 Beeps No Beeper
Mode No sound